ACO CDNP6ACC User manual

CDN-USB
USB
CDNP7ACC / INSPIRO +
INSTRUCTIONS FOR CHANGING LANGUAGES
To enter the installer's menu:
- press the " " button
- within 5 seconds enter
"1507xxxx", where "xxxx" is the four-
digit password of the Installer, which
is factory set to"0000" and must be
changed to its own!
NOTE! In the latest control panels
(soft. ver.:K-15), "0000" has been
replaced by the last four digits of the
product serial number available on the
sticker.
Confirmation of entry
there is a beep in the installer's menu,
the software version appears on the
display and then program number „0":
"Otwie" (Default - Polish) or other
language e.g. „Open”.
soft. ver.: K-14
Press ”79'’ simultaneously to exit the
menu and start the countdown.
After the countdown has been
completed and during the momentary
the "ACO" sign displayed
- press simultaneously the buttons
"456" to set language no. 2
- press simultaneously the buttons
"123" to set language no. 1
soft. ver.: K-15
To change the language just press in
installer’s menu simultaneously the
buttons:
- "456" to set language no. 2
- "123" to set language no. 1
B - using software
https://www.support.aco.com.pl/
12
A - from panel (only 2 languages)
Use latest version of x700 software.
Select one of the languages and save settings: „Main unit`s parameters”
Basic set of languages:
Ask your seller for other set of languages.
1 PL
2 EN
3 DE
4 FR
1
2
3
4
Language
Main unit’s parameters
Save settings
Please download the latest version of x700 software from:

CDN-USB
USB
CDNP6 / CDNP6ACC
INSTRUCTIONS FOR CHANGING LANGUAGES
To enter the installer's menu:
- press the " " button
- within 5 seconds enter
"1507xxxx", where "xxxx" is the four-
digit password of the Installer, which
is factory set to"0000" and must be
changed to its own!
Confirmation of entry
there is a beep in the installer's menu,
the software version appears on the
display and then program number „0":
"Otwie" (Default - Polish) or other
language e.g. „Open”.
Press ”79'’ simultaneously
to exit the menu and start the
countdown.
After the countdown has been
completed (during the momentary the
"ACO" sign displayed) press
simultaneously the buttons
„456" to set language no. 2
- press simultaneously the buttons
"123" to set language no. 1
A - from panel
B - using software
Use latest version of CDNP software.
Select one of the languages.
Basic set of languages:
- basic: Polish
- second: English
Save settings: „Main unit`s parameters”.
Double-click on the language change.
The parameters tab will open.
Ask your seller for other set of languages.
12
Save settings in CDNP
Central language basic
basic
second
https://www.support.aco.com.pl/
Please download the latest version of CDNP software from:
Instructions and more information
also available on:
EN
ACO Sp. z o.o. sp. komandytowa
ul. Diamentowa 7
62-002 Suchy Las, Poland
tel. [phone]
[phone]
[email protected]
www.aco.com.pl
tel.
[email protected] DE
EN FR
www.support.aco.com.pl
IU0708vA.2020