ACV 381114-23-1-1 User manual

© 07/2011 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
4
1
2
4
5
3
6
7
Compatible with these double DIN devices
Double DIN Navigation
Installation Manual
Double DIN Kit
Ford Focus 2011-> Colour: black
Lead Cable for part-no.:
Alpine 381114-23-1-1
Blaupunk 381114-23-1-5
Becker 381114-23-1-0
Clarion 381114-23-1-8
JVC 381114-23-1-9
Kenwood 381114-23-1-7
Panasonic 381114-23-1-2
Pioneer 381114-23-1-3
Sony 381114-23-1-6
Zenec 381114-23-1-4
1: Facia Plate
2: Mounting Bracket Right Assembly
3: Mounting Bracket Left Assembly
4: Flat Headed Screw
5: Speaker
6: Stalk Interface
7: Lead Cable
Spare OEM hazard light
switch by Ford required
Ford Part-No.: 1519127

2. Unclip panel under OEM radio
All installation work must be performed by a qualied professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
1. Ford Foucs OEM Dashboard
(sample photo)
3. Remove Panel under OEM radio
4. These 2 screws need to
be removed

16. Mount spare hazard light switch to
facia plate. Clip facia plate on dash
board. Install everything in reverse
order.
15. A spare OEM hazard light switch
by Ford is required.
Ford Part-No.: 1519127
14. as needed fix speaker with
cyanoacrylate adhesive
4a. Remove 2 screws under OEM radio
5. Unclip OEM panel
6. Remove OEM panel carefully
7. Unplug cables

10. Mount mounting brackets to
double DIN head unit
9. OEM dash board with removed
head unit
8. Remove 2 screws ( see arrows)
Remove OEM head unit
11. Install double DIN head unit
Connect all required circuit points
and connections. Please see stalk
interface manual for connecting
stalk interface
Fix navigation with OEM screws
Preperation of facia plate
12. Unclip 2 OEM air vents
Preperation of facia plate
13. Mount them to new facia plate
The Focus is equipped with
two kinds of OEM displays
A: Display with 2 buttons
at right side (see arrow)
No trim frame required
B: Colour Display:
Clip trim frame to facia plate
A
B