ADLINK Technology CM5-P1000 User manual

CM5-P1000
NVIDIA Pascal™ GP107 Quadro® P1000
PCIe/104 Graphics Module
User’s Manual
Manual Rev.: 1.0
Revision Date: November 1, 2021
Part No: 50M-00052-1000

ii Revision History
Revision History
Revision Release Date Description of Change(s)
1.0 2021-11-01 intitial release

Preface iii
CM5-P1000
Preface
Copyright © 2021ADLINK Technology Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsi-
bility to global environmental preservation
through compliance with the European Union's
Restriction of Hazardous Substances (RoHS)
directive and Waste Electrical and Electronic
Equipment (WEEE) directive. Environmental pro-
tection is a top priority for ADLINK. We have
enforced measures to ensure that our products,
manufacturing processes, components, and raw
materials have as little impact on the environment as possible.
When products are at their end of life, our customers are encour-
aged to dispose of them in accordance with the product disposal
and/or recovery programs prescribed by their nation or company.
Battery Labels (for products with battery)
ᘄ㟁ụㄳᅇᨲ

iv Preface
California Proposition 65 Warning
WARNING: This product can expose you to chemicals
including acrylamide, arsenic, benzene, cadmium,
Tris(1,3-dichloro-2-propyl) phosphate (TDCPP), 1,4-
Dioxane, formaldehyde, lead, DEHP, styrene, DINP,
BBP, PVC, and vinyl materials, which are known to the State of
California to cause cancer, and acrylamide, benzene, cadmium,
lead, mercury, phthalates, toluene, DEHP, DIDP, DnHP, DBP,
BBP, PVC, and vinyl materials, which are known to the State of
California to cause birth defects or other reproductive harm. For
more information go to www.P65Warnings.ca.gov.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.

Table of Contents v
CM5-P1000
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Tables......................................................................... vii
List of Figures........................................................................ ix
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 1
1.3 Specifications....................................................................... 2
1.4 Display Support and Options............................................... 3
1.5 Software Support................................................................. 3
1.6 Functional Block Diagram.................................................... 4
1.7 Mechanical Dimensions....................................................... 5
1.8 Ordering Information............................................................ 8
1.9 Unpacking Checklist ............................................................ 8
1.10 Optional Cooling Solutions .................................................. 9
2 Interfaces ............................................................................ 1
2.1 Board Layout ....................................................................... 1
2.2 Connectors .......................................................................... 3
3 System Requirements........................................................ 5
3.1 Power Sequencing............................................................... 5
3.2 Module Power Up and Down............................................... 5
3.3 Reset Requirements............................................................ 6
3.4 Thermal Policy..................................................................... 7
3.5 BIOS Settings...................................................................... 8
3.6 Driver Installation................................................................. 8
3.7 Certifications & Agencies..................................................... 8

vi Table of Contents
Important Safety Instructions................................................. 9
Getting Service...................................................................... 13

List of Tables vii
CM5-P1000
List of Tables
Table 1-1: CM5-P1000 Specifications.........................................2
Table 3-1: Thermal Policy............................................................7

viii List of Tables
This page intentionally left blank.

List of Figures ix
CM5-P1000
List of Figures
Figure 1-1: CM5-P1000 Functional Block Diagram ......................4
Figure 1-2: CM5-P1000 Dimensions.............................................5
Figure 1-3: CM5-P1000 Mounting Specifications .........................6
Figure 1-4: CM5-P1000 PCB Specifications.................................7
Figure 2-1: CM5-P1000 Top Side Layout.....................................1
Figure 2-2: CM5-P1000 Bottom Side Layout................................2
Figure 3-1: Power Sequencing .....................................................5
Figure 3-2: Module Power Down ..................................................6
Figure 3-3: Reset Sequencing......................................................6

xListofFigures
This page intentionally left blank.

Introduction 1
CM5-P1000
1 Introduction
1.1 Overview
The CM5-P1000 PCIe104 module is a compact, thin graphics
module solution based on the PCI/104-Express™ & PCIe/104™
version 3.0 specification, delivering the latest, leading-edge GPU
benefits for your embedded system. Its superior graphics perfor-
mance, GPU computing and video capabilities are the ideal solu-
tion for performance demanding systems such as digital signage,
medical image, defense and aerospace application.
1.2 Features
XNVIDIA Quadro P1000 GPU
XPCIe/104 Type 1 (116 x 96 mm)
X640 CUDA cores
X1.8 TFLOPS peak FP32 performance
X4GB GDDR5 memory
X96GB/s maximum memory bandwidth
X4x UHD DisplayPort outputs
XWide operating temperature range: -40°C to +85°C

2 Introduction
1.3 Specifications
Table 1-1: CM5-P1000 Specifications
Graphics Core
Architecture NVIDIA Pascal™ GP107, 640 CUDA cores
GPU Quadro® P1000
Display Outputs 4x DisplayPort 1.4 digital video outputs Support for High Dynamic Range (HDR) video
4K at 120Hz or 5K at 60Hz with 10-bit color depth
Signal Interface PCI Express x16 Gen3 bus, PCI device IE 0x1CBB
GPGPU Computing
GFLOPS 1.8 TFLOPS peak FP32 performance
Memory
GDDR5 Memory 4GB
Memory Width 128-bit
Bandwidth 96 GB/s
Physical
Dimensions 116 (W) x 96 (D) mm
Interface PCIe/104 Type 1
Environmental
Operating Temp. -40˚C to 85˚C
Storage Temp. -40˚C to 85˚C
Operating Humidity ~95% @40 ˚C (non-condensing)
Vibration MIL-STD-810H
Operating: 7.7 Grms, 20-2000 Hz, 1 hr each axis
Shock MIL-STD-810H Operating: 20 G peak, 11 ms duration, half-sine,
3 shocks each axis
ESD Contact +/- 4kV, air +/- 8kV
EMC CE, FCC Class B, EN55032, EN55035
Operating System
Supported OS Windows 10 & Linux Drivers, 64-bit
Miscellaneous
Power Consumption Max. 50W
MTBF 250,000 hrs commercial 40˚C ambient (according to
MIL calculation)

Introduction 3
CM5-P1000
1.4 Display Support and Options
DisplayPort
XVersion 1.4
XMax. pixel clock: 1050 MP/s
XMax. bandwidth: 25.9 GB/s/connector
Resolution
XUp to 5120 x 3200 at 60Hz, with 10-bit color depth
XSupport for High Dynamic Range (HDR) video
1.5 Software Support
XCUDA Toolkit 8.0
XCUDA Compute version 6.1
XOpenCL™ 1.2
XDirectX® 12
XOpenGL 4.5

4 Introduction
1.6 Functional Block Diagram
Figure 1-1: CM5-P1000 Functional Block Diagram
GPU
N18P-Q1
40W
IFPA
IFPE
PCIe x16 Gen3
PCIE
IFPB
IFPF
SMBus
Power Management (PWR_EN PWR_GOOD WAKE#) PM
JTAG
SPI
DP Conn 1
DP Conn 2
DP1.4
DP Conn 3
DP1.4
DP Conn 4
DP1.4
DP1.4
GDDR5 8Gb x2
GDDR5
Channel A 3Gbps
memory down
GDDR5 8Gb x2
Channel B 3Gbps
memory down
Fan Conn
SPI
SPI - VBIOS
12V

Introduction 5
CM5-P1000
1.7 Mechanical Dimensions
Figure 1-2: CM5-P1000 Dimensions
NOTE:
NOTE:
All dimensions shown in mm [thou].
90.17
95.885
115.57
79.375
1.57

6 Introduction
Figure 1-3: CM5-P1000 Mounting Specifications
00
80.01 3150
5.08 200
17.78 700
85.09 3350 97.79 3850
00
5.08 200
3.175 125
82.55 3250
85.725 3375
90.805 3575
00 2.54 100 5.08 200 85.09 3350 76.2 3000
7.771 305.9
53.771 2117
23.004 905.7
69.004 2716.7
A
B
A
AA
BB
B

Introduction 7
CM5-P1000
Figure 1-4: CM5-P1000 PCB Specifications
00
00
00
4.191 165
9.271 365
C
AA
AA
C
CC
6.35 250
3.175 125
Screw Hole A
6 236.2
3.2 126
Screw Hole B
7 275.6
3.2 126
Screw Hole C
6.35 250
3.175 125

8 Introduction
1.8 Ordering Information
XCM5-P1000-DP
PCIe/104 Type 1 graphics module, NVIDIA Quadro P1000
(640 CUDA cores), 4GB GDDR5, 0°C to +60°C
XCM5-P1000-DP-ETT
PCIe/104 Type 1 graphics module, NVIDIA Quadro P1000
(640 CUDA cores), 4GB GDDR5, -40°C to +85°C
For conformal coating please contact your local sales representa-
tive.
1.9 Unpacking Checklist
Before unpacking, check the shipping carton for any damage. If
the shipping carton and/or contents are damaged, inform your
dealer immediately. Retain the shipping carton and packing
materials for inspection. Obtain authorization from your dealer
before returning any product to ADLINK. Ensure that the fol-
lowing items are included in the package.
XCM5-P1000 PCIe/104 Graphics Module

Introduction 9
CM5-P1000
1.10 Optional Cooling Solutions
The following cooling solutions are available for purchase sepa-
rately. Please contact your ADLINK representative for detailed
more information and mechanical drawings.
XCMx-P1000TM-00
CM5-P1000 heat spreader, -40°C to 85°C
(P/N: 91-95291-100E)
XCMx-P1000TM-10
CM5-P1000 passive heat sink, -40°C to 85°C with air flow
(P/N: 91-95291-200E)

10 Introduction
XCMx-P1000TM-20
CM5-P1000 active heat sink, -10°C to 70°C
(P/N: 91-95291-300E)
XCMx-P1000TM-30
CM5-P1000 active heat sink (for ETT testing only, requires
external 4-pin Molex power), -40°C to 85°C
(P/N: 91-95291-400E)