ADLINK Technology Express-HR User manual

Express-HR
User’s Manual
Manual Revision: 2.00
Revision Date: June 11, 2012
Part Number: 50-1J036-1000

Express-HR User’s ManualPage 2
Revision History
Release Date Change
2.00 June 11, 2012 Initial release

Page 3Express-IA533 User’s Manual Page 3Express-IA533 User’s ManualExpress-HR User’s Manual Page 3
Page 3Express-HR User’s Manual
Table of Contents
Preface ............................................................................................................................5
1 Introduction...............................................................................................................7
1.1 Description ...........................................................................................................................7
2 Specifications............................................................................................................8
2.1 General.................................................................................................................................8
2.2 Expansion Busses ...............................................................................................................8
2.3 Video ....................................................................................................................................9
2.4 Audio ....................................................................................................................................9
2.5 LAN.......................................................................................................................................9
2.6 Multi I/O ..............................................................................................................................10
2.7 Super I/O ............................................................................................................................10
2.8 TPM (Trusted Platform Module)........................................................................................10
2.9 Power Specifications .........................................................................................................10
2.10 Power Consumption ..........................................................................................................11
2.11 Operating Systems ............................................................................................................12
2.12 Mechanical and Environmental.........................................................................................12
3 FunctionDiagram ...................................................................................................13
4 MechanicalDimensions..........................................................................................14
5 PinoutandSignalDescriptions..............................................................................15
5.1 COM Express® Type 6 compatible pinout........................................................................15
5.2 Carrier Board Design Guide ..............................................................................................15
5.3 Pin Definitions ....................................................................................................................16
5.4 Signal Descriptions............................................................................................................18
5.5 Onboard Fan Connector....................................................................................................26
6 ModuleConfiguration .............................................................................................27
6.1 Digital Display Interface (DDI) ...........................................................................................27
6.2 PCI Express x16 Configuration..........................................................................................27

Express-HR User’s ManualPage 4
7 EmbeddedFunctions..............................................................................................28
7.1 Watchdog Timer.................................................................................................................28
7.2 GPIO ...................................................................................................................................29
7.3 Hardware Monitoring.........................................................................................................30
8 System Resources..................................................................................................31
8.1 System Memory Map.........................................................................................................31
8.2 Direct Memory Access Channels ......................................................................................32
8.3 Legacy I/O Map..................................................................................................................32
8.4 Interrupt Request (IRQ) Lines ...........................................................................................33
8.5 PCI Configuration Space Map ...........................................................................................35
8.6 PCI Interrupt Routing Map .................................................................................................36
9 BIOSSetupUtility....................................................................................................37
9.1 Starting the BIOS................................................................................................................37
9.2 UEFI BIOS Setup Utility......................................................................................................38
9.3 Main Setup.........................................................................................................................39
9.4 Advanced Setup.................................................................................................................40
9.5 Chipset Configuration........................................................................................................54
9.6 Boot Setup..........................................................................................................................60
9.7 Security Setup....................................................................................................................62
9.8 Save & Exit .........................................................................................................................63
10 BIOSCheckpoints,BeepCodes.............................................................................65
10.1 Status Code Ranges..........................................................................................................66
10.2 Standard Status Codes .....................................................................................................66
10.3 OEM-Reserved Status Code Ranges ...............................................................................72
Important Safety Instructions......................................................................................73
GettingService .............................................................................................................74

Page 5Express-IA533 User’s Manual Page 5Express-IA533 User’s ManualExpress-HR User’s Manual Page 5
Page 5Express-HR User’s Manual
Preface
Copyright 2012 ADLINK Technology, Inc.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or other
means in any form without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior notice in order to improve
reliability, design, and function and does not represent a commitment on the part of the
manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential
damages arising out of the use or inability to use the product or documentation, even if advised
of the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global environmental preservation
through compliance with the European Union's Restriction of Hazardous Substances (RoHS)
directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental
protection is a top priority forADLINK. We have enforced measures to ensure that our products,
manufacturing processes, components, and raw materials have as little impact on the
environment as possible. When products are at their end of life, our customers are encouraged to
dispose of them in accordance with the product disposal and/or recovery programs prescribed by
their nation or company.
Trademarks
AMIBIOS®8 is a registered trademark of American Megatrends, Inc. COM Express®, and
PICMG®are registered trademarks of the PCI Industrial Computer Manufacturers Group.
Product names mentioned herein are used for identification purposes only and may be
trademarks and/or registered trademarks of their respective companies.

Express-HR User’s ManualPage 6
Conventions
Take note of the following conventions used throughout this manual to make sure that users
perform certain tasks and instructions properly.
Additional information, aids, and tips that help users perform tasks.
Information to prevent minor physical injury, component damage, data loss,
and/or program corruption when trying to complete a task.
Information to prevent serious physical injury, component damage, data
loss, and/or program corruption when trying to complete a specific task.

Page 7Express-IA533 User’s Manual Page 7Express-IA533 User’s ManualExpress-HR User’s Manual Page 7
Page 7Express-HR User’s Manual
1Introduction
1.1 Description
The Express-HR is a COM Express® COM.0 R2.0 Type 6 module supporting the 64-bit Intel®
Core™ i7/i5 processor with CPU, memory controller, and graphics processor on the same
chip. Based on the latest Mobile Intel® QM67 Express chipset, the Express-HR is specifically
designed for customers who need high-level processing and graphics performance in a long
product life solution.
The Express-HR features the Intel® Core™ i7/i5 processor supporting Intel® Hyper-threading
Technology (4 cores, 8 threads) and up to 16GB of DDR3 dual-channel memory at
1066/1333 MHz to provide excellent overall performance. Intel® Flexible Display Interface
and Direct Media Interface provide high speed connectivity to the Intel® QM67 Express
chipset.
Integrated HD Graphics 3000 includes features such as OpenGL 3.0, DirectX10.1, Intel®
Clear Video HD Technology, Advanced Scheduler 2.0, 1.0, XPDM support, and DirectX Video
Acceleration (DXVA) support for full AVC/VC1/MPEG2 hardware decode. Graphics outputs
include VGA, LVDS and three DDI ports supporting HDMI / DVT / DisplayPort or SDVO. The
Express-HR is specifically designed for customers with high-performance processing
graphics requirements who want to outsource the custom core logic of their systems for
reduced development time.
The Express-HR has dual stacked SODIMM sockets for up to 16 GB DDR3 memory. The
Intel® Mobile QM67 Express chipset integrates VGA and dual-channel 18/24-bit LVDS
display output. In addition to the onboard integrated graphics, a multiplexed PCI Express®
x16 Graphics bus is available for discrete graphics expansion or general purpose x8 or x4
PCI Express® connectivity.
The Express-HR features a single onboard Gigabit Ethernet port, up to eight USB 2.0 ports,
two SATA 6 Gb/s ports and two SATA 3 Gb/s ports with optional support for RAID 0/1/5/10.
Support is provided for SMBus and I2C. The module is equipped with SPI AMI EFI BIOS with
CMOS backup, supporting embedded features such as remote console, CMOS backup,
hardware monitor, and watchdog timer.
The Express-HR is a RoHS compliant and lead-free product.

Express-HR User’s ManualPage 8
2Specifications
2.1 General
fCPU: Sandy Bridge 32 nm process, BGA type
Intel® Core™ i7-2715QE 2.1 GHz (3.0 GHz Turbo), 6MB L3 cache, 45W
Intel® Core™ i7-2655LE 2.2 GHz (2.9 GHz Turbo), 4MB L3 cache, 25W
Intel® Core™ i7-2610UE 1.5 GHz (2.4 GHz Turbo), 4MB L3 cache, 17W
Intel® Core™ i5-2515E 2.5 GHz (3.2 GHz Turbo), 3MB L3 cache, 35W
fMemory: Dual channel non-ECC 1066/1333 MHz DDR3 memory up to 16 GB in
dual SODIMM socket
fChipset: Mobile Intel® QM67 Express
fL3 Cache: 6MB (i7-2715QE), 4MB (i7-2655LE and i7-2610UE), 3MB (i5-2515E)
fBIOS: AMI EFI with CMOS backup in 16 Mbit SPI BIOS
fDebug Interface: XDP SFF-26 extension for ICE debug
fHardware Monitor: Supply voltages and CPU temperature
fWatchdog Timer: Programmable timer ranges to generate RESET
2.2 Expansion Busses
fOn Processor:
- PCI Express x16 Graphics (Gen2) bus for discrete graphics solution or General
Purpose PCI Express (2 x8 or 1 x8 with 2 x4) - see 6.2 PCI Express x16
Configuration
fOn Chipset:
- 8 PCI Express x1: 0/1/2/3/4/5/6 are free, 7 is occupied by GbE LAN
- LPC bus for optional connections to SIO, UART, etc.
fLPC bus, SMBus (system), I2C(user)

Page 9Express-IA533 User’s Manual Page 9Express-IA533 User’s ManualExpress-HR User’s Manual Page 9
Page 9Express-HR User’s Manual
2.3 Video
fCore:HDGraphics3000 at 650–1300MHz
fIntegratedGraphicsFeatures:
- DirectX 10.1 and OpenGL 3.0
- Intel Clear Video HD Technology
- Advanced Scheduler 2.0, 1.0, XPDM support
- DirectX Video Acceleration (DXVA) support for full AVC/VC1/MPEG2 hardware decode
fVGA Interface: Analog VGA support up to QXGA, 300MHz DAC
fLVDS Interface: Dualchannel 18/24-bit
fDigital Display Interface (DDI): Three DDI ports supporting HDMI / DVI / DisplayPort or
SDVO (see Note below regarding DisplayPort). A maximum of two simultaneous display
outputs are supported. SDVO is available on DDI1 only. See 6.1 Digital Display Interface
for information on configuring the DDI output.
DisplayPort
DisplayPort is a VESA interface standard for digital display. It defines a new license-
free, royalty-free, state-of-the-art digital audio/video interconnect, intended to be
used primarily between a computer and its display monitor, or a computer and a
home theater system. It features 1.62 Gb/s and 2.7 Gb/s transfer rates over 1, 2 or 4
data lanes, 8b 10b coding, Hot-Plug detect support and HDCP support. Embedded
DisplayPort (eDP) does not offer all features of standard DisplayPort because
embedded applications do not require features such as link training, hot plug
detection or logo testing. The eDP standard supports one data pair supporting XGA
(1024x768) over two wires. Optionally 4 wires can be used for two data pairs to
support 1280x1024.
2.4 Audio
fChipset: Integrated in Intel® PCH QM67
fAudio Codec: on Express-BASE6 (ALC888)
2.5 LAN
fChipset: Intel® Gigabit LAN PHY WG82579LM
fInterface: 10/100/1000 Mbps Ethernet

Express-HR User’s ManualPage 10
2.6 Multi I/O
fSATA: Supports two SATA ports at 6 Gb/s and two ports at 3 Gb/s with support for
RAID0,1,5,10
fUSB: Supports up to eight ports USB 2.0
fSSD: Optional SATA based Solid State Disk, 8/16/32 GB
2.7 Super I/O
fConnected to LPC bus on carrier if needed
2.8 TPM (Trusted Platform Module)
fChipset:InfineonSLB9635TT1.2
fType: TPM1.2
2.9 Power Specifications
fInput Power: AT mode (12 V +/- 5%) andATX mode (12 V and 5 Vsb +/- 5%)
fPower States: supporting S0, S1, S3, S4, S5
fSmart Battery Support: yes

Page 11Express-IA533 User’s Manual Page 11Express-IA533 User’s ManualExpress-HR User’s Manual Page 11
Page 11Express-HR User’s Manual
2.10 Power Consumption
The 12V measurement is power to the module only (excluding carrier board
power draw). The 5Vsb measurement (in S3/S5 mode) includes both module
power consumption plus active 5Vsb powered peripherals (such as PS/2 and
USB) on the carrier that are needed for wakeup. Although all voltages were
measured, only 12 V and 5 VSB are relevant because they are the only ones
used by the Express module. The Idle power level was measured under
Windows XP with no applications running (login screen). Max Load was
measured under Windows XP running BurnIn software. Measurements were
made with two 4GB 1066 MHz DDR3 SODIMM memory modules installed.
Intel® Core™ i7-2715QE 2.1 GHz
Power State +12V +5VSB Power Consumption
Idle(WindowsXPlogin) 0.88 V N.S. 10.56 W
Max. Load (Windows XP - BurnIn) 6.56 V N.S. 78.72 W
S1 (standby powered on) 0.81 V N.S. 9.72W
S3 (suspend to RAM) - 0.49V 2.45W
S5(softoff) - 0.37V 1.85 W
Intel® Core i7-2655LE 2.2 GHz
Power State +12V +5VSB Power Consumption
Idle(WindowsXPlogin) 0.77 V N.S. 9.24 W
Max. Load (Windows XP - BurnIn) 4.06 V N.S. 48.72 W
S1 (standby powered on) 0.73 V N.S. 8.76W
S3 (suspend to RAM) - 0.48V 2.4 W
S5(softoff) - 0.37V 1.85 W
Intel® Core™ i7-2610UE 1.5 GHz
Power State +12V +5VSB Power Consumption
Idle(WindowsXPlogin) 0.77A N.S. 9.24W
Max. Load (Windows XP - BurnIn) 2.86A N.S. 34.32 W
S1 (standby powered on) 0.73A N.S. 8.76 W
S3 (suspend to RAM) - 0.48A 2.4 W
S5(softoff) - 0.37A 1.85W

Express-HR User’s ManualPage 12
Power Consumption (cont’d)
Intel® Core™ i5-2515E 2.5 GHz
Power State +12V +5VSB Power Consumption
Idle(WindowsXPlogin) 0.83 V N.S. 9.96 W
Max. Load (Windows XP - BurnIn) 4.55 V N.S. 54.6W
S1 (standby powered on) 0.77 V N.S. 9.24W
S3 (suspend to RAM) - 0.49V 2.45W
S5(softoff) - 0.37V 1.85 W
CMOS Battery Power Consumption
Current (+3V) Power
1.3µA 0.00000429 W
2.11 Operating Systems
fStandard Support
- Windows XP 32/64-bit
- Windows Vista 32/64-bit
- Windows Server 2003/2008
fExtended Support (BSP)
- Embedded XP WES2009 BSP
- Embedded Win7
- Vxworks 6.x
- Linux 2.6.xx
- AIDI Library for Windows XP(e), Windows 7 32/64-bit and Linux
2.12 Mechanical and Environmental
fForm Factor : PICMG COM.0 R2, COM Express™Basic form factor
fType : PICMG COM.0 R2, COM Express™Type 6 pinout
fDimensions: 95 x 125 mm
fStandardOperating Temperature: 0°Cto60°C
fRelative Humidity: up to 90% at 60°C

Page 13Express-IA533 User’s Manual Page 13Express-IA533 User’s ManualExpress-HR User’s Manual Page 13
Page 13Express-HR User’s Manual
3Function Diagram
PCH
QM67
Processor
i7 / i5 / i3
Quad & Dual Core
GbE LAN
82579
GPIO
PCA9535
BC
AB
6x PCIe x1
(port 0~5)
SMBus
Dual channel 24-bit LVDS
4x GP0
I2C
8x USB 2.0 (channel 0/7)
CD
SODIMM 2
1066/1333 MHz
1~8 GB DDR3
SPI 1
BIOS
PCIe x1
(port 7)
HDA Audio
LPC bus
FDI
SODIMM 2
1066/1333 MHz
1~8 GB DDR3
PCI Express x16 (Gen2)
2 x8 or 1 x8 + 2 x4
SPI
DDI 1
DP / HDMI / DVI / SDVO
DDI 2
DP / HDMI / DVI
DDI 3
DP / HDMI / DVI / eDP
PCIe x1
(port 6)
4x GPI Monitor
ADT7490
DMI
VGA
TPM
SLB9635
2x SATA 3 Gb/s (channel 0/1)
2x SATA 2 Gb/s (channel 2/3)
SPI 2
BIOS
Debug
header
XDP
SFF26

Express-HR User’s ManualPage 14
4Mechanical Dimensions
All tolerances ± 0.05 mm
Other tolerances ± 0.2 mm

Page 15Express-IA533 User’s Manual Page 15Express-IA533 User’s ManualExpress-HR User’s Manual Page 15
Page 15Express-HR User’s Manual
5Pinout and Signal Descriptions
5.1 COM Express
®
Type 6 compatible pinout
All signals on AB and CD connectors of the Express-HR comply with pinouts and conventions
used in the original “PICMG®COM.0 R2.0: COM Express®Module Base Specification”.
95mm.
CD
AB
125mm. CD Connector
USB3.0
addtional signals to upgrade
4 USB ports on AB to USB230
2 PCI Express Lanes x1
3DDIChannels
Displayport/HDMI/DVI and SDVO
PCI Express x16 for Graphics
or General purpose PCIe
5.2 Carrier Board Design Guide
The PICMG COM Express Carrier Design Guide is a
160-page document that provides information on
designing a custom carrier board for COM Express
modules. The design guide includes reference
schematics for the external circuitry required to
implement the various COM Express peripheral
functions, explains how to extend the supported buses,
and how to add additional peripherals and expansion
slots to a COM Express-based system. You can
download the document Carrier Design Guide at:
http://www.adlinktech.com/ccps/picmg_comdg_100.pdf
TheabovefunctionmappingsareagenericdescriptionofCOM
Expresspinouts,andnotnecessarilysupportedonthemodule
describedinthismanual.
AB Connector
1GigabitEthernetport
LPC and SPI bus
4SerialATAchannels
HighDefinitionAudio
8 USB 2.0 ports
6 PCI Express Lanes x1
Dual24-bitLVDSchannels
AnalogVGA
8 GPIO pins
SMBus and I2C bus
FanControlSignals
+12Vprimarypowerinput
+5V standby and 3V RTC

Express-HR User’s ManualPage 16
Pin No. Pin Name Pin No. Pin Name Pin No. Pin Name Pin No. Pin Name
A1 GND (FIXED) B1 GND (FIXED) C1 GND FIXED) D1 GND FIXED)
A2 GBE0_MDI3- B2 GBE0_ACT# C2 GND D2 GND
A3 GBE0_MDI3+ B3 LPC_FRAME# C3 USB_SSRX0- D3 USB_SSTX0-
A4 GBE0_LINK100# B4 LPC_AD0 C4 USB_SSRX0+ D4 USB_SSTX0+
A5 GBE0_LINK1000# B5 LPC_AD1 C5 GND D5 GND
A6 GBE0_MDI2- B6 LPC_AD2 C6 USB_SSRX1- D6 USB_SSTX1-
A7 GBE0_MDI2+ B7 LPC_AD3 C7 USB_SSRX1+ D7 USB_SSTX1+
A8 GBE0_LINK# B8 LPC_DRQ0# C8 GND D8 GND
A9 GBE0_MDI1- B9 LPC_DRQ1# C9 USB_SSRX2- D9 USB_SSTX2-
A10 GBE0_MDI1+ B10 LPC_CLK C10 USB_SSRX2+ D10 USB_SSTX2+
A11 GND (FIXED) B11 GND (FIXED) C11 GND (FIXED) D11 GND (FIXED)
A12 GBE0_MDI0- B12 PWRBTN# C12 USB_SSRX3- D12 USB_SSTX3-
A13 GBE0_MDI0+ B13 SMB_CK C13 USB_SSRX3+ D13 USB_SSTX3+
A14 GBE0_CTREF B14 SMB_DAT C14 GND D14 GND
A15 SUS_S3# B15 SMB_ALERT# C15 DDI1_PAIR6+ D15 DDI1_CTRLCLK_AUX+
A16 SATA0_TX+ B16 SATA1_TX+ C16 DDI1_PAIR6- D16 DDI1_CTRLDATA_AUX-
A17 SATA0_TX- B17 SATA1_TX- C17 RSVD D17 RSVD
A18 SUS_S4# B18 SUS_STAT# C18 RSVD D18 RSVD
A19 SATA0_RX+ B19 SATA1_RX+ C19 PCIE_RX6+ D19 PCIE_TX6+
A20 SATA0_RX- B20 SATA1_RX- C20 PCIE_RX6- D20 PCIE_TX6-
A21 GND (FIXED) B21 GND (FIXED) C21 GND (FIXED) D21 GND (FIXED)
A22 SATA2_TX+ B22 SATA3_TX+ C22 PCIE_RX7+ D22 PCIE_TX7+
A23 SATA2_TX- B23 SATA3_TX- C23 PCIE_RX7- D23 PCIE_TX7-
A24 SUS_S5# B24 PWR_OK C24 DDI1_HPD D24 RSVD
A25 SATA2_RX+ B25 SATA3_RX+ C25 DDI1_PAIR4+ D25 RSVD
A26 SATA2_RX- B26 SATA3_RX- C26 DDI1_PAIR4- D26 DDI1_PAIR0+
A27 BATLOW# B27 WDT C27 RSVD D27 DDI1_PAIR0-
A28 (S)ATA_ACT# B28 AC/HDA_SDIN2 C28 RSVD D28 RSVD
A29 AC/HDA_SYNC B29 AC/HDA_SDIN1 C29 DDI1_PAIR5+ D29 DDI1_PAIR1+
A30 AC/HDA_RST# B30 AC/HDA_SDIN0 C30 DDI1_PAIR5- D30 DDI1_PAIR1-
A31 GND (FIXED) B31 GND (FIXED) C31 GND (FIXED) D31 GND (FIXED)
A32 AC/HDA_BITCLK B32 SPKR C32 DDI2_CTRLCLK_AUX+ D32 DDI1_PAIR2+
A33 AC/HDA_SDOUT B33 I2C_CK C33 DDI2_CTRLDATA_AUX- D33 DDI1_PAIR2-
A34 BIOS_DIS0# B34 I2C_DAT C34 DDI2_DDC_AUX_SEL D34 DDI1_DDC_AUX_SEL
A35 THRMTRIP# B35 THRM# C35 RSVD D35 RSVD
A36 USB6- B36 USB7- C36 DDI3_CTRLCLK_AUX+ D36 DDI1_PAIR3+
A37 USB6+ B37 USB7+ C37 DDI3_CTRLDATA_AUX- D37 DDI1_PAIR3-
A38 USB_6_7_OC# B38 USB_4_5_OC# C38 DDI3_DDC_AUX_SEL D38 RSVD
A39 USB4- B39 USB5- C39 DDI3_PAIR0+ D39 DDI2_PAIR0+
A40 USB4+ B40 USB5+ C40 DDI3_PAIR0- D40 DDI2_PAIR0-
A41 GND (FIXED) B41 GND (FIXED) C41 GND (FIXED) D41 GND (FIXED)
A42 USB2- B42 USB3- C42 DDI3_PAIR1+ D42 DDI2_PAIR1+
A43 USB2+ B43 USB3+ C43 DDI3_PAIR1- D43 DDI2_PAIR1-
A44 USB_2_3_OC# B44 USB_0_1_OC# C44 DDI3_HPD D44 DDI2_HPD
A45 USB0- B45 USB1- C45 RSVD D45 RSVD
A46 USB0+ B46 USB1+ C46 DDI3_PAIR2+ D46 DDI2_PAIR2+
A47 VCC_RTC B47 EXCD1_PERST# C47 DDI3_PAIR2- D47 DDI2_PAIR2-
A48 EXCD0_PERST# B48 EXCD1_CPPE# C48 RSVD D48 RSVD
A49 EXCD0_CPPE# B49 SYS_RESET# C49 DDI3_PAIR3+ D49 DDI2_PAIR3+
A50 LPC_SERIRQ B50 CB_RESET# C50 DDI3_PAIR3- D50 DDI2_PAIR3-
RowARowB RowCRowD
5.3 Pin Definitions
Pinouts for:
COM.0 R2.0 Type 6
C D
A B
A1
B1
C1
D1
A110
B110
C110
D110

Page 17Express-IA533 User’s Manual Page 17Express-IA533 User’s ManualExpress-HR User’s Manual Page 17
Page 17Express-HR User’s Manual
XXX Strikethroughpinnamesindicates thatthesignalisnotsupportedonthismodule.
Pin No. Pin Name Pin No. Pin Name Pin No. Pin Name Pin No. Pin Name
A51 GND (FIXED) B51 GND (FIXED) C51 GND (FIXED) D51 GND (FIXED)
A52 PCIE_TX5+ B52 PCIE_RX5+ C52 PEG_RX0+ D52 PEG_TX0+
A53 PCIE_TX5- B53 PCIE_RX5- C53 PEG_RX0- D53 PEG_TX0-
A54 GPI0 B54 GPO1 C54 TYPE0# D54 PEG_LANE_RV#
A55 PCIE_TX4+ B55 PCIE_RX4+ C55 PEG_RX1+ D55 PEG_TX1+
A56 PCIE_TX4- B56 PCIE_RX4- C56 PEG_RX1- D56 PEG_TX1-
A57 GND B57 GPO2 C57 TYPE1# D57 TYPE2#
A58 PCIE_TX3+ B58 PCIE_RX3+ C58 PEG_RX2+ D58 PEG_TX2+
A59 PCIE_TX3- B59 PCIE_RX3- C59 PEG_RX2- D59 PEG_TX2-
A60 GND (FIXED) B60 GND (FIXED) C60 GND (FIXED) D60 GND (FIXED)
A61 PCIE_TX2+ B61 PCIE_RX2+ C61 PEG_RX3+ D61 PEG_TX3+
A62 PCIE_TX2- B62 PCIE_RX2- C62 PEG_RX3- D62 PEG_TX3-
A63GPI1 B63GPO3 C63RSVD D63RSVD
A64 PCIE_TX1+ B64 PCIE_RX1+ C64 RSVD D64 RSVD
A65 PCIE_TX1- B65 PCIE_RX1- C65 PEG_RX4+ D65 PEG_TX4+
A66 GND B66 WAKE0# C66 PEG_RX4- D66 PEG_TX4-
A67 GPI2 B67 WAKE1# C67 RSVD D67 GND
A68 PCIE_TX0+ B68 PCIE_RX0+ C68 PEG_RX5+ D68 PEG_TX5+
A69 PCIE_TX0- B69 PCIE_RX0- C69 PEG_RX5- D69 PEG_TX5-
A70 GND (FIXED) B70 GND (FIXED) C70 GND (FIXED) D70 GND (FIXED)
A71 LVDS_A0+ B71 LVDS_B0+ C71 PEG_RX6+ D71 PEG_TX6+
A72 LVDS_A0- B72 LVDS_B0- C72 PEG_RX6- D72 PEG_TX6-
A73 LVDS_A1+ B73 LVDS_B1+ C73 GND D73 GND
A74 LVDS_A1- B74 LVDS_B1- C74 PEG_RX7+ D74 PEG_TX7+
A75 LVDS_A2+ B75 LVDS_B2+ C75 PEG_RX7- D75 PEG_TX7-
A76 LVDS_A2- B76 LVDS_B2- C76 GND D76 GND
A77 LVDS_VDD_EN B77 LVDS_B3+ C77 RSVD D77 RSVD
A78 LVDS_A3+ B78 LVDS_B3- C78 PEG_RX8+ D78 PEG_TX8+
A79 LVDS_A3- B79 LVDS_BKLT_EN C79 PEG_RX8- D79 PEG_TX8-
A80 GND (FIXED) B80 GND (FIXED) C80 GND (FIXED) D80 GND (FIXED)
A81 LVDS_A_CK+ B81 LVDS_B_CK+ C81 PEG_RX9+ D81 PEG_TX9+
A82 LVDS_A_CK- B82 LVDS_B_CK- C82 PEG_RX9- D82 PEG_TX9-
A83 LVDS_I2C_CK B83 LVDS_BKLT_CTRL C83 TPM_PP D83 RSVD
A84 LVDS_I2C_DAT B84 VCC_5V_SBY C84 GND D84 GND
A85 GPI3 B85 VCC_5V_SBY C85 PEG_RX10+ D85 PEG_TX10+
A86 RSVD B86 VCC_5V_SBY C86 PEG_RX10- D86 PEG_TX10-
A87 RSVD B87 VCC_5V_SBY C87 GND D87 GND
A88 PCIE0_CK_REF+ B88 BIOS_DIS1# C88 PEG_RX11+ D88 PEG_TX11+
A89 PCIE0_CK_REF- B89 VGA_RED C89 PEG_RX11- D89 PEG_TX11-
A90 GND (FIXED) B90 GND (FIXED) C90 GND (FIXED) D90 GND (FIXED)
A91 SPI_POWER B91 VGA_GRN C91 PEG_RX12+ D91 PEG_TX12+
A92 SPI_MISO B92 VGA_BLU C92 PEG_RX12- D92 PEG_TX12-
A93 GPO0 B93 VGA_HSYNC C93 GND D93 GND
A94 SPI_CLK B94 VGA_VSYNC C94 PEG_RX13+ D94 PEG_TX13+
A95 SPI_MOSI B95 VGA_I2C_CK C95 PEG_RX13- D95 PEG_TX13-
A96 TPM_PP B96 VGA_I2C_DAT C96 GND D96 GND
A97 TYPE10# B97 SPI_CS# C97 RSVD D97 RSVD
A98 SER0_TX B98 RSVD C98 PEG_RX14+ D98 PEG_TX14+
A99 SER0_RX B99 RSVD C99 PEG_RX14- D99 PEG_TX14-
A100 GND (FIXED) B100 GND (FIXED) C100 GND (FIXED) D100 GND (FIXED)
A101 SER1_TX B101 FAN_PWMOUT C101 PEG_RX15+ D101 PEG_TX15+
A102 SER1_RX B102 FAN_TACHIN C102 PEG_RX15- D102 PEG_TX15-
A103 LID# B103 SLEEP# C103 GND D103 GND
A104 VCC_12V B104 VCC_12V C104 VCC_12V D104 VCC_12V
A105 VCC_12V B105 VCC_12V C105 VCC_12V D105 VCC_12V
A106 VCC_12V B106 VCC_12V C106 VCC_12V D106 VCC_12V
A107 VCC_12V B107 VCC_12V C107 VCC_12V D107 VCC_12V
A108 VCC_12V B108 VCC_12V C108 VCC_12V D108 VCC_12V
A109 VCC_12V B109 VCC_12V C109 VCC_12V D109 VCC_12V
A110 GND (FIXED) B110 GND (FIXED) C110 GND (FIXED) D110 GND (FIXED)
Row DRow A Row B Row C

Express-HR User’s ManualPage 18
5.4 Signal Descriptions Row A
Pin Signal Description Type PU/PD Comment
A1 GND Ground PWR - -
A2 GBE0_MDI3- Ethernet Media Dependent Interface - I/O - DP - -
A3 GBE0_MDI3+ Ethernet Media Dependent Interface + I/O - DP - -
A4 GBE0_LINK100# Ethernet Speed LED (100Mb) OD - On at 100Mb/s
A5 GBE0_LINK1000# Ethernet Speed LED (1000Mb) OD - On at 1000Mb/s
A6 GBE0_MDI2- Ethernet Media Dependent Interface - I/O - DP - -
A7 GBE0_MDI2+ Ethernet Media Dependent Interface + I/O - DP - -
A8 GBE0_LINK# LAN Link LED O-3.3 -
A9 GBE0_MDI1- Ethernet Media Dependent Interface - I/O - DP - -
A10 GBE0_MDI1+ Ethernet Media Dependent Interface + I/O - DP - -
A11 GND Ground PWR - -
A12 GBE0_MDI0- Ethernet Media Dependent Interface - I/O - DP - -
A13 GBE0_MDI0+ Ethernet Media Dependent Interface + I/O - DP - -
A14 GBE0_CTREF ETHCTREF O-1,8 - -
A15 SUS_S3# PM_SLP_S#3 O-3.3 - -
A16 SATA0_TX+ SATA0_TX+ | SATA 0 Transmit Data + O - DP - -
A17 SATA0_TX- SATA0_TX- | SATA 0 Transmit Data - O - DP - -
A18 SUS_S4# PM_SLP_S#4 O-3.3 - -
A19 SATA0_RX+ SATA0_RX+ | SATA 0 Receive Data + I - DP - -
A20 SATA0_RX- SATA0_RX - | SATA 0 Receive Data - I - DP - -
A21 GND Ground PWR - -
A22 SATA2_TX+ SATA2_TX+ | SATA 2 Transmit Data + O - DP - -
A23 SATA2_TX- SATA2_TX- | SATA 2 Transmit Data - O - DP - -
A24 SUS_S5# PM_SLP_S#5 O-3.3 - -
A25 SATA2_RX+ SATA2_RX+ | SATA 2 Receive Data + I - DP - -
A26 SATA2_RX- SATA2_RX- | SATA 2 Receive Data - I - DP - -
A27 BATLOW# PM_BATLOW# | Battery Low I-3.3 PU 8k2 3.3Vsb -
A28 ATA_ACT# ATA_LED# | SATA LED O-3.3 PU 10k 3.3V
A29 AC_SYNC AC_SYNC | AC'97 Sync O-3.3 - int. PD 20k in QM57
A30 AC_RST# AC_RST# | AC'97 Reset O-3.3 - int. PD 20k in QM57
A31 GND Ground PWR -
A32 AC_BITCLK AC_BITCLK | AC'97 Clock O-3.3 - int. PD 20k in QM57
A33 AC_SDOUT AC_SDATAOUT | AC'97 Data O-3.3 - int. PD 20k in QM57
A34 BIOS_DISABLE# BIOS_DISABLE# I-3.3 PU 10k 3.3Vsb -
A35 THRMTRIP# PM_THRMTRIP#_CON O-3.3 PU 330 3.3V -
A36 USB6- USB_PN6 | USB Data – Port6 I/O - DP - int. PD 20k in QM57
A37 USB6+ USB_PP6 | USB Data + Port6 I/O - DP - int. PD 20k in QM57
A38 USB_6_7_OC# USB_OC#_6_7 | USB OverCurrent Port 6/7 I-3.3 PU 10k 3.3Vsb -
A39 USB4- USB_PN4 | USB Data - Port4 I/O - DP - int. PD 20k in QM57
A40 USB4+ USB_PP4 | USB Data + Port4 I/O - DP - int. PD 20k in QM57
A41 GND Ground PWR - -
A42 USB2- USB_PN2 | USB Data - Port2 I/O - DP - int. PD 20k in QM57
A43 USB2+ USB_PP2 | USB Data + Port2 I/O - DP - int. PD 20k in QM57
A44 USB_2_3_OC# USB_OC#_2_3 | USB OverCurrent Port 2/3 I-3.3 PU 10k 3.3Vsb
A45 USB0- USB_PN0 | USB Data - Port0 I/O - DP - int. PD 20k in QM57
A46 USB0+ USB_PP0 | USB Data + Port0 I/O - DP - int. PD 20k in QM57
A47 VCC_RTC V_BAT PWR - -
A48 EXCD0_PERST# Express Card Support [0]|card reset O-3.3 PU 10k 3.3Vsb -
A49 EXCD0_CPPE# Express Card Support [0]| capable request I-3.3 PU 10k 3.3V -
A50 LPC_SERIRQ INT_SERIRQ | Serial Interrupt Request IO-3.3 PU 10k 3.3V -
A51 GND Ground PWR - -
A52 PCIE5_TX+ PCI Express 5 Transmit + O - DP - -
A53 PCIE5_TX- PCI Express 5 Transmit - O - DP - -
A54 GPI0 General Purpose Input 0 I-3.3 PU 10k 3.3Vsb -
A55 PCIE4_TX+ PCI Express 4 Transmit + O - DP - -

Page 19Express-IA533 User’s Manual Page 19Express-IA533 User’s ManualExpress-HR User’s Manual Page 19
Page 19Express-HR User’s Manual
Row A
Signal Descriptions (cont’d)
Pin Signal Description Type PU/PD Comment
A56 PCIE4_TX- PCI Express 4 Transmit - O - DP - -
A57 GND Ground PWR - -
A58 PCIE3_TX+ PCI Express 3 Transmit + O - DP - -
A59 PCIE3_TX- PCI Express 3 Transmit - O - DP - -
A60 GND Ground PWR - -
A61 PCIE2_TX+ PCI Express 2 Transmit + O - DP - -
A62 PCIE2_TX- PCI Express 2 Transmit - O - DP - -
A63 GPI1 General Purpose Input 1 I-3.3 PU 10k 3.3Vsb -
A64 PCIE1_TX+ PCI Express 1 Transmit + O - DP - -
A65 PCIE1_TX- PCI Express 1 Transmit - O - DP - -
A66 GND Ground PWR - -
A67 GPI2 General Purpose Input 2 I-3.3 PU 10k 3.3Vsb -
A68 PCIE0_TX+ PCI Express 0 + O - DP - -
A69 PCIE0_TX- PCI Express 0 - O - DP - -
A70 GND Ground PWR - -
A71 LVDS_A0+ LVDS_AP0 | LVDS Channel A O - DP - -
A72 LVDS_A0- LVDS_AN0 | LVDS Channel A O - DP - -
A73 LVDS_A1+ LVDS_AP1 | LVDS Channel A O - DP - -
A74 LVDS_A1- LVDS_AN1 | LVDS Channel A O - DP - -
A75 LVDS_A2+ LVDS_AP2 | LVDS Channel A O - DP - -
A76 LVDS_A2- LVDS_AN2 | LVDS Channel A O - DP - -
A77 LVDS_VDD_EN LVDS_VDDEN | LVDS Panel Power O-2,5 PD 10k -
A78 LVDS_A3+ LVDS_AP3 | LVDS Channel A O - DP - -
A79 LVDS_A3- LVDS_AN3 | LVDS Channel A O - DP - -
A80 GND Ground PWR - -
A81 LVDS_A_CK+ LVDS_CLKAP | LVDS Channel A O - DP - -
A82 LVDS_A_CK- LVDS_CLKAN | LVDS Channel A O - DP - -
A83 LVDS_I2C_CK LVDS_DDCPCLK | JILI I2C Clock IO-3.3 PU 2k2 3.3V -
A84 LVDS_I2C_DAT LVDS_DDCPDATA | JILI I2C Data IO-3.3 PU 2k2 3.3V -
A85 GPI3 General Purpose Input 3 I-3.3 PU 10k 3.3Vsb -
A86 RSVD NC NC -
A87 RSVD NC NC -
A88 PCIE_CK_REF+ CLK_PCIE_REF P O - DP - -
A89 PCIE_CK_REF- CLK_PCIE_REF N O - DP - -
A90 GND Ground PWR - -
A91 SPI_POWER Power supply for Carrier Board SPI O-3.3 - -
A92 SPI_MISO IO - -
A93 GPO0 General Purpose Output 0 O-3.3 PU 10k 3.3Vsb -
A94 SPI_CLK Clock from Module to Carrier SPI IO - -
A95 SPI_MOSI Data out from Module to Carrier SPI IO - -
A96 TPM_PP Trusted Platform Module IO-3.3 - -
A97 TYPE10# Module type ID pin 10 NC - -
A98 SER0_TX serial port transmitter NC - -
A99 SER0_RX serial port receiver NC - -
A100 GND Ground PWR - -
A101 SER1_TX serial port transmitter NC - -
A102 SER1_RX serial port receiver NC - -
A103 LID# LID button. OD --
A104 VCC_12V Power 12V PWR - -
A105 VCC_12V Power 12V PWR - -
A106 VCC_12V Power 12V PWR - -
A107 VCC_12V Power 12V PWR - -
A108 VCC_12V Power 12V PWR - -
A109 VCC_12V Power 12V PWR - -
A110 GND Ground PWR - -

Express-HR User’s ManualPage 20
Row B
Signal Descriptions (cont’d)
Pin Signal Description Type PU/PD Comment
B1 GND Ground PWR - -
B2 GBE0_ACT# LAN_ACTLED# | Ethernet Activity LED OD PU 1k 3.3V -
B3 LPC_FRAME# LPC_FRAME# | LPC Frame Indicator O-3.3 - -
B4 LPC_AD0 LPC_AD0 | LPC Adress & DATA Bus IO-3.3 -
B5 LPC_AD1 LPC_AD1 | LPC Adress & DATA Bus IO-3.3 -
B6 LPC_AD2 LPC_AD2 | LPC Adress & DATA Bus IO-3.3 -
B7 LPC_AD3 LPC_AD3 | LPC Adress & DATA Bus IO-3.3 -
B8 LPC_DRQ0# SIO_DRQ#0 | LPC Serial DMA Request 0 I-3.3 - int. PU 20k in QM57
B9 LPC_DRQ1# SIO_DRQ#1 | LPC Serial DMA Request 1 I-3.3 - int. PU 20k in QM57
B10 LPC_CLK CLK_SIOEXTPCI O-3.3 - -
B11 GND Ground I-3.3 - -
B12 PWRBTN# Power Button I-5 PU 10k 3.3Vsb -
B13 SMB_CK SMBUS Clock O-3.3 PU2k2 3.3Vsb -
B14 SMB_DAT SMBUS Data IO-3.3 PU 2k2 3.3Vsb -
B15 SMB_ALERT# SMB_ALERT# I-3.3 PU 10k 3.3Vsb -
B16 SATA1_TX+ SATA1_TX+ | SATA 1 Transmit Data + O - DP - -
B17 SATA1_TX- SATA1_TX- | SATA 1 Transmit Data - O - DP - -
B18 SUS_STAT# PM_SUS_ STAT# O-3.3 - -
B19 SATA1_RX+ SATA1_RX+ | SATA 1 Receive Data + I - DP - -
B20 SATA1_RX- SATA1_RX - | SATA 1 Receive Data - I - DP - -
B21 GND Ground PWR - -
B22 SATA3_TX+ SATA3_TX+ | SATA 3 Transmit Data + O - DP - -
B23 SATA3_TX- SATA3_TX- | SATA 3 Transmit Data - O - DP - -
B24 PWR_OK Power OK I,3.3 PU10k 3.3Vsb -
B25 SATA3_RX+ SATA3_RX+ | SATA 3 Receive Data + I - DP - -
B26 SATA3_RX- SATA3_RX - | SATA 3 Receive Data - I - DP - -
B27 WDT Watch Dog Timer O-3.3 -
B28 AC_SDIN2 AC_SDATAIN2 I-3.3 - int. PD 20k in QM57
B29 AC_SDIN1 AC_SDATAIN1 I-3.3 - int. PD 20k in QM57
B30 AC_SDIN0 AC_SDATAIN0 I-3.3 - int. PD 20k in QM57
B31 GND Ground PWR -
B32 SPKR AC_SPKR O-3.3 - int. PD 20k in QM57
B33 I2C_CK I2CLK O-3.3 PU 10k 3.3V -
B34 I2C_DAT I2DAT IO-3.3 PU 10k 3.3V -
B35 THRM# PM THRM# CON | Over Temperature I-3.3 -
B36 USB7- USB_PN7 | USB Data – Port7 I/O - DP - int. PD 20k in QM57
B37 USB7+ USB_PP7 | USB Data +Port7 I/O - DP - int. PD 20k in QM57
B38 USB_4_5_OC# USB_OC#_4_5 | USB OverCurrent Port I-3.3 PU 10k 3.3Vsb
B39 USB5- USB_PN5 | USB Data- Port5 I/O - DP - int. PD 20k in QM57
B40 USB5+ USB_PP5 | USB Data+ Port5 I/O - DP - int. PD 20k in QM57
B41 GND Ground I-3.3 - -
B42 USB3- USB_PN3 | USB Data- Port3 I/O - DP - int. PD 20k in QM57
B43 USB3+ USB_PP3 | USB Data+ Port3 I/O - DP - int. PD 20k in QM57
B44 USB_0_1_OC# USB_OC#_0_1 | USB OverCurrent Port I-3.3 PU 10k 3.3Vsb -
B45 USB1- USB_PN1 | USB Data- Port1 I/O - DP - int. PD 20k in QM57
B46 USB1+ USB_PP1 | USB Data+ Port1 I/O - DP - int. PD 20k in QM57
B47 EXCD1_PERST# Express Card Support [1]|card reset O-3.3 PU 10k 3.3Vsb -
B48 EXCD1_CPPE# Express Card Support [1]| capable c. I-3.3 PU 10k 3.3V -
B49 SYS_RESET# ETX_SYS_RESET# | Reset Input I-3.3 PU 10k 3.3Vsb -
B50 CB_RESET# PCI_RST# | PCI Bus Reset O-3.3 - -
B51 GND Ground PWR - -
B52 PCIE5_RX+ PCI Express 5 Recieve + I - DP - -
B53 PCIE5_RX- PCI Express 5 Receive - I - DP - -
B54 GPO1 General Purpose Output 1 O-3.3 PU10k 3.3Vsb -
B55 PCIE4_RX+ PCI Express 4 Recieve + I - DP - -