ADTRAN 1200315L1 User manual

Quad BRI/U Module
User Manual
Part Number 1200315L1
61200315L1-1B
April 2000

901 Explorer Boulevard
P.O. Box 140000
Huntsville, AL 35814-4000
[phone]
© 2000 ADTRAN, Inc.
All Rights Reserved.
Printed in U.S.A.

iii
Affidavit Requirements for Connection to Digital Services
• An affidavit is required tobe given to the telephone company whenever digital terminal equipment
without encoded analog content and billing protection is used to transmit digital signals containing
encoded analog content which are intended for eventual conversion into voiceband analog signals
and transmitted on the network.
• The affidavit shall affirm that either no encoded analog content or billing information is being
transmitted or that the output of the device meets Part 68 encoded analog content or billing protec-
tion specifications.
• End user/customer will be responsible for filing an affidavit with the local exchange carrier when
connecting unprotected customer premise equipment (CPE) to 1.544 Mbps or subrate digital ser-
vices.
• Until such time as subrate digital terminal equipment is registered for voice applications, the affi-
davit requirement for subrate services is waived.

iv
Affidavit for Connection of Customer Premises Equipment
to 1.544 Mbps and/or Subrate Digital Services
For the work to be performed in the certified territory of ________________________(telco name)
State of ________________
County of ________________
I, _____________________________ (name), __________________________________(business address),
____________________ (telephone number) being duly sworn, state:
I have responsibility for the operation and maintenance of the terminal equipment to be connected to
1.544 Mbps and/or ________ subrate digital services. The terminal equipment to be connected com-
plies with Part 68 of the FCC rules except for the encoded analog content and billing protection speci-
fications. With respect to encoded analog content and billing protection:
( ) I attest that all operations associated with the establishment, maintenance, and adjustment of the
digital CPE with respect to analog content and encoded billing protection information continu-
ously complies with Part 68 of the FCC Rules and Regulations.
( ) The digital CPE does not transmit digital signals containing encoded analog content or billing
information which is intended to be decoded within the telecommunications network.
( ) The encoded analog content and billing protection is factory set and is not under the control of the
customer.
I attest that the operator(s)/maintainer(s) of the digital CPE responsible for the establishment, mainte-
nance, and adjustment of the encoded analog content and billing information has (have) been trained
to perform these functions by successfully having completed one of the following (check appropriate
blocks):
( ) A. A training course provided by the manufacturer/grantee of the equipment used to encode
analog signals; or
( ) B. A training course provided by the customer or authorized representative, using training mate-
rials and instructions provided by the manufacturer/grantee of the equipment used to encode
analog signals; or
( ) C. An independent training course (e.g., trade school or technical institution) recognized by the
manufacturer/grantee of the equipment used to encode analog signals; or
( ) D. In lieu of the preceding training requirements, the operator(s)/maintainer(s) is (are) under the
control of a supervisor trained in accordance with _________ (circle one) above.
I agree to provide ______________________ (telco’s name) with proper documentation to demonstrate
compliance with the information as provided in the preceding paragraph, if so requested.
_________________________________Signature
_________________________________Title
_________________________________ Date
Transcribed and sworn to before me this ________ day of ________, ________
__________________________________________
Notary Public
My commission expires: _________________________________

v
FCC regulations require that the following information be provided
in this manual to the customer:
1. This equipment complies with Part 68 of the FCC rules. The required label is affixed to the bottom
of the chassis.
2. An FCC-compliant telephone cord and modular plug is provided with this equipment. This equip-
ment is designed to be connected to the telephone network or premises wiring using a compatible
modular jack which is Part 68-compliant. See Chapter 2, Installation, for details.
3. If your telephone equipment (Octal BRI/U Module) causes harm to the telephone network, the tele-
phone company may discontinue your service temporarily. If possible, they will notify you in ad-
vance. But if advance notice isn’t practical, you will be notified as soon as possible. You will be
advised of your right to file a complaint with the FCC.
4. Your telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the proper operation of your equipment. If they do, you will be given advance
notice to give you an opportunity to maintain uninterrupted service.
5. If you experience trouble with this equipment (Octal BRI/U Module), please contact ADTRAN at
[phone] for repair/warranty information. The telephone company may ask you to discon-
nect this equipment from the network until the problem has been corrected or until you are sure
the equipment is not malfunctioning.
6. This unit contains no user-serviceable parts.
7. The following information may be required when applying to your local telephone company for
leased line facilities.
Federal Communications Commission (FCC) Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio frequencies. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Shielded cables must be used with this unit to ensure compliance with Class A FCC limits.
Service Type REN/SOC FIC USOC
Basic Rate ISDN 6.0N 02IS5 RJ-48C
Change or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

vi
Canadian Equipment Limitations
Before installing this equipment, users should ensure that it is permissible to be connected to the facil-
ities of the local telecommunications company. The equipment must also be installed using an accept-
able method of connection. In some cases, the company's inside wiring associated with a single line
individual service may be extended by means of a certified connector assembly (telephone extension
cord). The customer should be aware that compliance with the above conditions may not prevent deg-
radation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility desig-
nated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment
malfunctions, may give the telecommunications company cause to request the user to disconnect the
equipment.
Users should ensure for their own protection that the electrical ground connections of the power util-
ity, telephone lines and internal metallic waterpipe system, if present, are connected together. This
precaution may be particularly important in rural areas.
The Load Number (LN) assigned to each terminal device denotes the percentage of the total load to be
connected to a telephone loop which is used by the device, to prevent overloading. The termination
on a loop may consist of any combination of devices subject only to the equipment that the total of the
LNs of all devices does not exceed 100.
The ringer equivalence number (REN) assigned to each terminal adapter is used to determine the total
number of devices that may be connected to each circuit. The sum of the RENs from all devices in the
circuit should not exceed a total of 5.0.
Warranty and Customer Service
ADTRAN will replace or repair this product within five years from the date of shipment if the product
does not meet its published specification, or if it fails while in service. For detailed warranty, repair, and
return information, refer to the ADTRAN Equipment Warranty and Repair and Return Policy Proce-
dure (see the last page of this manual).
A return material authorization (RMA) is required prior to returning equipment to ADTRAN.
For service, RMA requests, or more information, see the last page of this manual for the toll-free contact
number.
The Industry Canada Certification label identifies certified equipment. This certification means
that the equipment meets certain telecommunications network protective, operational, and safety
requirements. The Department of Commerce does not guarantee the equipment will operate to the
user's satisfaction.
Users should not attempt to make such connections themselves, but should contact the appropriate
electric inspection authority, or an electrician, as appropriate.

vii
Limited Product Warranty
ADTRAN warrants that for five (5) years from the date of shipment to Customer, all products manu-
factured by ADTRAN will be free from defects in materials and workmanship. ADTRAN also war-
rants that products will conform to the applicable specifications and drawings for such products, as
contained in the Product Manual or in ADTRAN's internal specifications and drawings for such prod-
ucts (which may or may not be reflected in the Product Manual). This warranty only applies if Cus-
tomer gives ADTRAN written notice of defects during the warranty period. Upon such notice,
ADTRAN will, at its option, either repair or replace the defective item. If ADTRAN is unable, in a rea-
sonable time, to repair or replace any equipment to a condition as warranted, Customer is entitled to a
full refund of the purchase price upon return of the equipment to ADTRAN. This warranty applies
only to the original purchaser and is not transferable without ADTRAN's express written permission.
This warranty becomes null and void if Customer modifies or alters the equipment in any way, other
than as specifically authorized by ADTRAN.
EXCEPT FOR THE LIMITEDWARRANTY DESCRIBED ABOVE, THE FOREGOING CONSTITUTES
THESOLEANDEXCLUSIVEREMEDYOFTHECUSTOMERANDTHEEXCLUSIVELIABILITYOF
ADTRAN AND IS IN LIEU OF ANY AND ALL OTHER WARRANTIES (EXPRESSED OR IMPLIED).
ADTRAN SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING (WITHOUT LIM-
ITATION), ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE. SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIEDWARRANTIES, SO THIS
EXCLUSIONMAYNOTAPPLYTOCUSTOMER.
In no event will ADTRAN or its suppliers be liable to Customer for any incidental, special, punitive,
exemplary or consequential damages experienced by either Customer or a third party (including, but
not limited to, loss of data or information, loss of profits, or loss of use). ADTRAN is not liable for dam-
ages for any cause whatsoever (whether based in contract, tort, or otherwise) in excess of the amount
paid for the item. Some states do not allow the limitation or exclusion of liability for incidental or con-
sequential damages, so the above limitation or exclusion may not apply to Customer.

viii

61200315L1-1 Quad BRI/U Module User Manual ix
Table of Contents
List of Figures ..................................................................................................................................................... xi
List of Tables.....................................................................................................................................................xiii
Chapter 1 Introduction................................................................................................................................. 1-1
Quad BRI/U Module Overview..................................................................................................................... 1-1
Functional Description.............................................................................................................................. 1-1
Features....................................................................................................................................................... 1-2
Quad BRI/U Module Specifications .............................................................................................................. 1-2
Physical Description.........................................................................................................................................1-3
Chapter 2 Installation................................................................................................................................... 2-1
Before Installing the Quad BRI/U Module...................................................................................................2-1
Shipping Contents .....................................................................................................................................2-1
Installing the Quad BRI/U Module ............................................................................................................... 2-1
Wiring................................................................................................................................................................. 2-3
Power Up and Initialization............................................................................................................................ 2-3
Failed Self-Test...........................................................................................................................................2-3
Operation Alarms......................................................................................................................................2-3
Chapter 3 Operation .....................................................................................................................................3-1
Overview............................................................................................................................................................3-1
Terminal Menu Structure.................................................................................................................................3-1
Modules Menu ..................................................................................................................................................3-2
Slt.................................................................................................................................................................. 3-2
Type .............................................................................................................................................................3-3
Menu............................................................................................................................................................3-3
Alarm........................................................................................................................................................... 3-3
Test............................................................................................................................................................... 3-3
State.............................................................................................................................................................. 3-3
Status ...........................................................................................................................................................3-3
Online...................................................................................................................................................3-3
No Response........................................................................................................................................ 3-4
Empty................................................................................................................................................... 3-4
Offline................................................................................................................................................... 3-4
Offline/No Response......................................................................................................................... 3-4
Rev ...............................................................................................................................................................3-4
Quad BRI/U Module Menus .......................................................................................................................... 3-4
U-BRI Menus ..................................................................................................................................................... 3-4
Info...............................................................................................................................................................3-4
Part Number........................................................................................................................................3-4
Serial Number.....................................................................................................................................3-4

Table of Contents
x Quad BRI/U Module User Manual 61200315L1-1
Assembly Revision .............................................................................................................................3-4
Alarm...........................................................................................................................................................3-5
Prt..........................................................................................................................................................3-5
Alarms..................................................................................................................................................3-5
Channel Status............................................................................................................................................3-5
Prt..........................................................................................................................................................3-5
Cha........................................................................................................................................................3-5
Performance Current.................................................................................................................................3-5
Configuration .............................................................................................................................................3-5
Test...............................................................................................................................................................3-5
Module Alarms..................................................................................................................................................3-5
Test Activity.......................................................................................................................................................3-5
ATLAS Features Used with Quad BRI/U Module Options.......................................................................3-6
Factory Restore..................................................................................................................................................3-6
Run Selftest.........................................................................................................................................................3-6
Appendix A Dial Plan Configuration .......................................................................................................A-1
Index...........................................................................................................................................................Index-1

61200315L1-1 Quad BRI/U Module User Manual xi
List of Figures
Figure 1-1. Quad BRI/U Module System ................................................................................................... 1-1
Figure 1-2. Quad BRI/U Module................................................................................................................. 1-3
Figure 2-1. Installing the Quad BRI/U Module......................................................................................... 2-2
Figure 3-1. Modules Menu............................................................................................................................ 3-2
Figure 3-2. Menu Tree for Quad BRI/U Modules Menu ......................................................................... 3-2
Figure 3-3. Quad BRI/U Module Menu Options ...................................................................................... 3-4
Figure A-1. Dial Plan Menus ........................................................................................................................ A-1

List of Figures
xii Quad BRI/U Module User Manual 61200315L1-1

61200315L1-1 Quad BRI/U Module User Manual xiii
List of Tables
Table 2-1. Network Pinout Connection..................................................................................................... 2-3

List of Tables
xiv Quad BRI/U Module User Manual 61200315L1-1

61200315L1-1 Quad BRI/U Module User Manual 1-1
Chapter 1 Introduction
QUAD BRI/U MODULE OVERVIEW
The Quad BRI/U Module is a member of the ATLAS 550 family of integrat-
ed access products, providing four Basic Rate ISDN (BRI) U interfaces, each
capable of operating in either NT or LT mode. Any port can deliver timing
for the system.
The Quad BRI/U Module combines with the ATLAS 550 Base Unit and
other ATLAS 550 modules to support requirements calling for multiple BRI
circuits. As many Quad BRI/U Modules can be installed in a system as can
be physically accommodated in the ATLAS 550 chassis. Figure 1-1 shows a
sample application using the Quad BRI/U Module.
Figure 1-1. Quad BRI/U Module System
WhencombinedwiththeATLAS550BaseUnitand,optionally,oneormore
Dual T1/PRI Modules (P/N 1200314L1), the Quad BRI/U Module can im-
plement an ISDN access switch, combining multiple BRI circuits into one or
more Primary Rate ISDN (PRI) circuits.
Functional Description
The Quad BRI/U Module installs in any available option slot in the ATLAS
550 chassis. You can view the status of the module itself, as well as the cir-
cuits to which it interfaces, via the terminal menus, accessible through either
a VT-100 terminal connected to the ATLAS 550 control port or via a Telnet
session established through the Base Unit’s Ethernet port. Use the terminal
menu to configure the Quad BRI/U Module and to download application
software.
PBX
T1/PRI Module
BRI Module
PRI
BRI
BRI
BRI
POWER
REMOTE ERROR
TEST
OK
TEST
ONLINE
STATUS
ERROR
TEST
OK
CRAFT
ACO
ALARM ALARM
12
NETWORK
1234
MODULES
SYSTEM
ETHERNET
ATLAS 550
ATLAS 550

Chapter 1. Introduction
1-2 Quad BRI/U Module User Manual 61200315L1-1
Features
The following list describes the features of the Quad BRI/U Module:
•FourBRIUInterfaces
• Near-end and far-end block error monitoring
• Canuseanyportasatimingsourcefortheentiresystem
• Hot swappable
• NT and LT mode support
• Maximum distance of 18,000 feet
QUAD BRI/U MODULE SPECIFICATIONS
Each port of the Quad BRI/U Module conforms to the following specifica-
tions:
•Linerate
160 kbps data rate (80 kbaud signaling +/-5 ppm)
•Linecodes
2B1Q
• Framing options
Framing per ANSI T1.601-1992
• Clock source
Allows any Quad BRI/U Module port operating in NETWORK TERM
mode to be the master timing source
• Tests
Circuit self-test loopback (internal toward network or user equipment)
• BRI switch support
Provides support for the following switches:
-AT&T5ESS(NTorLT)
- Nortel DMS-100 (NT or LT)
-NationalISDN-1
• Line performance data
Reported via SNMP in RFC1406 format
• Connectors
RJ-45

Chapter 1. Introduction
61200315L1-1 Quad BRI/U Module User Manual 1-3
PHYSICAL DESCRIPTION
The Quad BRI/U Module (see Figure 1-2) plugs into any available option
slot in the rear of the ATLAS chassis.
Figure 1-2. Quad BRI/U Module
The label over each RJ-45 connector refers to the port on the Quad BRI/U
Module.
The four Option slots (labeled 1 — 4) only accept Option Modules,
and the Network Interface slots (labeled Network 1 and Network 2)
only accept Network Interface Modules. (See the ATLAS 550 in
Figure 2-1 on page 2-2.)
1234
ISDN BRI U INTERFACE
500 Series

Chapter 1. Introduction
1-4 Quad BRI/U Module User Manual 61200315L1-1

61200315L1-1 Quad BRI/U Module User Manual 2-1
Chapter 2 Installation
BEFORE INSTALLING THE QUAD BRI/U MODULE
Carefully unpack and inspect the Quad BRI/U Module for shipping damag-
es. If you suspect damage occurred during shipping, file a claim immediate-
ly with the carrier and then contact ADTRAN Technical Support (see the last
page of this manual for pertinent information). If possible, keep the original
shipping container for returning the Quad BRI/U Module for repair or for
verification of shipping damage.
Shipping Contents
The ADTRAN shipment includes the following items:
•QuadBRI/UModule
•QuadBRI/UModuleUser Manual (insert into the ATLAS User Manual)
• Four RJ-45-to-RJ-11 cables, ADTRAN P/N: 3125M007
INSTALLING THE QUAD BRI/U MODULE
Figure 2-1 on page 2-2 represents the actions required to properly install the
Quad BRI/U Module, as described in the step/action table on page 2-1.
The four Option slots (labeled 1 — 4) only accept Option Modules,
and the Network Interface slots(labeled Network 1 and Network 2)
only accept Network Interface Modules. (See the ATLAS 550 in
Figure 2-1 on page 2-2.)

Chapter 2. Installation
2-2 Quad BRI/U Module User Manual 61200315L1-1
Figure 2-1. Installing the Quad BRI/U Module
Instructions for Installing the Quad BRI/U Module
Step Action
1Remove the cover plate from the appropriate option slot in the
ATLAS rear panel.
2Slide the Quad BRI/U Module into the option slot until the
module is firmly positioned against the front of the chassis.
3Secure the thumbscrews at both edges of the module. Tighten
with a screwdriver.
4Connect the cables to the associated device(s).
5Complete installation of remaining modules and Base Unit as
specified in the Installation chapter of the ATLAS 550 User
Manual.
NETWORK2
24
ETHERNET
CONTROL
IN OUT
RELAYALARM
OI
FUSE RATING:2A/250V SLO-BLO
90-240VAC, 2A, 50/60Hz
NCNO
COM GND
ALLEMPTYSLOTSMUSTBE
COVEREDWITHBLANKPANELS
CAUTION:FORCONTINUEDPROTECTION
AGAINSTRISKOFFIRE, REPLACEONLY
WITHSAMETYPEANDRATINGOFFUSE.
MON
Remove Cover Plate
IO
1234
ISDNBRIUINTERFACE
500 Ser
500 Ser
ies
Option modules are intended to be serviced by qualified service
personnel only.