Advantech FPM-5171G Series User manual

FPM-5171G Series
17" XGA Industrial Monitor with
Resistive Touchscreen,
Direct-VGA, DVI Ports
and DC10-30V Inputs
User Manual

FPM-5171G User Manual ii
Copyright Notice
This document is copyrighted by Advantech Co., Ltd. All rights are
reserved. Advantech Co., Ltd. reserves the right to make improvements to
the products described in this manual at any time.
Specifications are thus subject to change without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this manual is
intended to be accurate and reliable. However, Advantech Co., Ltd.,
assumes no responsibility for its use, nor for any infringements upon the
rights of third parties which may result from its use.
All brand and product names mentioned herein are trademarks or
registered trademarks of their respective holders.
This Manual Covers the Following Models
• FPM-5171G-X0AE
• FPM-5171G-R3AE
Part Number: 2003517100
Edition 1 December 2007

iii
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its prod-
ucts will be free from defects in materials and workmanship for two years
from the date of purchase.
This warranty does not apply to any products which have been repaired or
altered by persons other than repair personnel authorized by Advantech,
or which have been subject to misuse, abuse, accident or improper instal-
lation. Advantech assumes no liability under the terms of this warranty as
a consequence of such events.
All defective products under normal / standard operation will be serviced
by Advantech’s global RMA system. If an Advantech product is defec-
tive, it will be repaired or replaced at no charge during the warranty
period. For out-of-warranty repairs, you will be billed according to the
cost of replacement materials, service time and freight. Please consult
your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, CPU speed, Advantech products used, other hardware
and software used, etc.) Note anything abnormal and list any
onscreen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your man-
ual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
merchandize authorization) number from your dealer. This allows
us to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for war-
ranty service.
5. Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.

FPM-5171G User Manual iv
FCC Class B
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a residential environment. This
equipment generates, uses and can radiate radio frequency energy. If not
installed and used in accordance with this user's manual, it may cause
harmful interference to radio communications. Note that even when this
equipment is installed and used in accordance with this user’s manual,
there is still no guarantee that interference will not occur. If this equip-
ment is believed to be causeing harmful interference to radio or television
reception, this can be determined by turning the equipment on and off. If
the interference is occurring, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment to a power outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

v
Additional Information and Assistance
1. Visit the Advantech web site at www.advantech.com where you can
find the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's
customer service center for technical support if you need additional
assistance. Please have the following information ready before you
call:
• Product name and serial number
• Description of your peripheral attachments
• Description of your software (operating system, version, application
software, etc.)
• A complete description of the problem
• The exact wording of any error messages
Safety Instructions
1. Read these safety instructions carefully.
2. Keep this User's Manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning.
Use a damp cloth. Do not use liquid or spray detergents for clean-
ing.
4. For plug-in equipment, the power outlet socket must be located
near the equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Drop-
ping it or letting it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before con-
necting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not
place anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient overvoltage.

FPM-5171G User Manual vi
12. Never pour any liquid into an opening. This may cause fire or elec-
trical shock.
13. Never open the equipment. For safety reasons, the equipment
should be opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked
by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work
according to the user's manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCON-
TROLLED ENVIRONMENT WHERE THE STORAGE TEM-
PERATURE IS BELOW -20° C (-4° F) OR ABOVE 60° C (140°
F). THIS MAY DAMAGE THE EQUIPMENT.
The sound pressure level at the operator's position according to IEC 704-
1:1982 is no more than 70dB(A).
DISCLAIMER: This set of instructions is given according to IEC 704-1.
Advantech disclaims all responsibility for the accuracy of any statements
contained herein.

vii Table of Contents
Contents
Chapter 1 Introduction ..................................................... 2
1.1 Introduction ....................................................................... 2
1.2 Specifications .................................................................... 2
1.3 LCD Specification............................................................. 3
1.4 Power Consumption .......................................................... 3
1.5 Connectors......................................................................... 4
1.6 Dimensions........................................................................ 5
Figure 1.1:FPM-5171G Dimensions .............................. 5
Chapter 2 Mounting.......................................................... 8
2.1 Mounting the Monitor ....................................................... 8
2.1.1 Wallmounting ................................................................ 8
Figure 2.1:Wallmounting ............................................... 8
2.1.2 Panel Mounting .............................................................. 9
Figure 2.2:Panel Mounting ............................................ 9
2.1.3 Rack Mounting (Optional) ........................................... 10
Figure 2.3:Rack Mounting Brackets ............................ 10
2.2 Desktop, Swing-ARM for FPM-5171G .......................... 11
2.2.1 Desktop Stand .............................................................. 11
Figure 2.4:Desktop Stand ............................................ 11
2.2.2 Swing-ARM (VESA Compliant) ................................. 12
Figure 2.5:Swing-ARM ............................................... 12
Appendix A Touchscreen ................................................... 14
A.1 Introduction ..................................................................... 14
A.2 Touchscreen Specifications............................................. 14
A.3 Installing Driver for Windows OS .................................. 15
Appendix B Setting Serial Data for Expansion ............... 18
B.1 Setting Serial Data for Expansion ................................... 18
Appendix C OSD Operation Keypad............................... 20
C.1 OSD Board Overview ..................................................... 20
C.1.1 OSD Button Description .............................................. 20
C.1.2 LED Function .............................................................. 20
C.2 OSD Key Functions ........................................................ 21
C.2.1 Menu Start .................................................................... 21
C.2.2 Input Source Select ...................................................... 22
C.2.3 Contrast/ Brightness Setting ........................................ 23
C.2.4 Geometry Menu – For DVI Input ................................ 24
C.2.5 Color Temperature Menu ............................................. 26
C.2.6 RGB Color Menu ......................................................... 27
C.2.7 Language Menu ........................................................... 28
C.2.8 OSD Manager .............................................................. 29
C.2.9 Auto Configuration Menu ............................................ 30

FPM-5171G User Manual viii
C.2.10 Mode Information Menu .............................................. 31
C.2.11 Memory Recall Menu .................................................. 32
C.2.12 Exit Menu .................................................................... 33
C.2.13 Hot Keys ...................................................................... 34

2
CHAPTER
1
Introduction
This chapter includes:
• Introduction
• Specifications
• LCD Specification
• Power Consumption
• Connectors
• Dimensions

FPM-5171G User Manual 2
Chapter 1 Introduction
1.1 Introduction
Advantech's FPM-5171G is a 17" color TFT LCD flat panel monitor built
specifically for industrial applications. With the optional touchscreen,
FPM-5171G is an excellent and user-friendly system control interface.
In addition to its usual application as an LCD panel monitor, FPM-5171G
comes standard with direct VGA and DVI control signal inputs, making it
compatible with Industrial PCs and Workstations. Its OSD (On Screen
Display) function allows you to adjust display factors such as brightness,
contrast, colors and VGA signal information. Functions that are more
and more critical as HMI users become aware of the benefits of flat panel
monitors. The whole chassis is of stainless steel, and the front panel is of
aluminum with NEMA4/IP65 compliance.
FPM-5171G also comes in a touch screen version (FPM-5171G-R). With
an 8-wire resistive type touchscreen, this monitor can be immediately
transformed into a remote control system. The Advantech FPM-5171G is
the ultimate HMI solution for your industrial application.
1.2 Specifications
General
• Construction: Heavy-duty aluminum and steel chassis
• Front panel: Aluminum, NEMA4 / IP65 Compliant
• Control: OSD (On Screen Display) control pad on rear
• Mounting: Panel, wall, desktop, VESA ARM or rack (with rackmount
• Dimensions (W x H x D): 481.9 x 355.9 x 58.5 mm (18.9"x 14" x 2.3")
• Weight: 8 kg (17.6 lb)

3 Chapter1
Touchscreen (Optional)
• Type: 8 wire, analog resistive
• Resolution: 1024 x 1024
• Light Transmission: >80% (Gouge Hardness is greater tahn 4H per
ASTM D3363-92 for HCC01, HCG10 and HCG12
• Operating Pressure: 30 ~ 45 gram for stylus pen
contact bounce < 10 ms
• Controller: USB & RS-232 interface
• Power Consumption: +5 V @ 100 mA
• OS Support: Win 95/98/ME/2000/XP/CE/NT/Vista, Linux, MS-DOS
• Life Span: 10 million activation (typical) at a single point with a 5/8"
diameter silicone finger with a 350 g load at 2 touches per second
1.3 LCD Specification
• Display Type: SXGA TFT LCD
• Display Size: 17"
• Max. Colors: 16.7 M (6 bit + FRC) Full Color
• Max. Resolution: 1024 x 768
• Dot Pitch: 0.297 x 0.297 mm
• View Angle: 160° (V), 160° (H)
• Luminance: 300 cd/m2
• Storage Temperature: -20 ~ 60 ° C
• Operating Temperature: 0 ~ 50 ° C
• Contrast Ratio: 800:1 (typ)
• Lamp Life Time (MTBF): 50,000 hrs.
1.4 Power Consumption
• Max. Output Power: 48 W
• AC Input Voltage: 100-240 VAC
• Output Voltage: + 12 V @ 4 A
• Safety Standards: BSMI, CE, FCC, CCC, UL

FPM-5171G User Manual 4
1.5 Connectors
The following connectors are situated on the left hand side of the
FPM-5171G Series:
VGA Port (DB-15)
This DB-15 connector can be connected to the system via the external
15-pin DB-15 connector locatd on the left side of the system unit.
DVI Port (DVI-D)
Connected with a standard DVI connector thru I/O port of this unit. Only
supports digital signals
Touchscreen Connector (DB-9) (optional)
This connector will be present only if a touchscreen is installed. It must
be connected to the RS-232 port of the PC. The touchscreen cable is
included with all orders which include the touchscreen option.
Touchscreen Connector (USB) (Optional)
This connector will be present only if a touchscreen is installed. It must
be connected to the USB port of the PC. The touchscreen cable is
included with all orders which include the USB touchscreen option.
DC 12V Power In
This connector will be connected to the DC 12V Switching Power
Supply.
Plug-In Block 3P Male (ME050-50803) DC10-30V
This block connector can be connected via the external plug-in block 3P
with flanges Female MC211-F103 connector
Note: RS-232 & USB touchscreen interface does not allow
connection into the system at the same time, but it
can be changed via switch

5 Chapter1
1.6 Dimensions
Figure 1.1: FPM-5171G Dimensions

FPM-5171G User Manual 6

2
CHAPTER
2
Mounting
• Wallmounting
• Panel Mounting
• Rack Mounting
• Desktop Mounting
• Swing Arm Mounting

FPM-5171G User Manual 8
Chapter 2 Mounting
2.1 Mounting the Monitor
The FPM-5171G Series can be mounted in many different ways. The
versatility of the FPM-5171G mounts enable it to be mounted on your
desk or anywhere else.
2.1.1 Wallmounting
FPM-5171G can be mounted directly on a wall with panel mounting
brackets. Please refer to figure 2-1 and follow the following steps to
mount FPM-5171G on a wall:
1. Screw the hook and desk-stand brackets on the wall.
2. Attach 4 screws around the bracket
3. Put the Industrial monitor into the screws around the bracket
Figure 2.1: Wallmounting

9 Chapter2
2.1.2 Panel Mounting
FPM-5171G can be mounted directly on a panel with additional mount-
ing brackets. Please refer to figure 2-2 and follow the following steps:
1. Fix 10pcs panel bracket around the industrial monitor
2. Fix into the panel by screw the bracket
Figure 2.2: Panel Mounting

FPM-5171G User Manual 10
2.1.3 Rack Mounting (Optional)
If you need to install the FPM-5171G on a rack, you must order the rack
mount kit for FPM-5171G (Part Number is FPM-5171G-RMKE). Attach
the rack mounting brackets on FPM-5171G with the screws, then affix
the monitor in the rack.
Figure 2.3: Rack Mounting Brackets

11 Chapter2
2.2 Desktop, Swing-ARM for FPM-5171G
The FPM-5171G Series can be mounted in other ways, such as desktop
and swing-arm.
2.2.1 Desktop Stand
FPM-5171G can be mounted as stand in the desk directly by a additional
mounting brackets. Please refer to figure 2-4 and follow these steps:
Figure 2.4: Desktop Stand

FPM-5171G User Manual 12
2.2.2 Swing-ARM (VESA Compliant)
FPM-5171G has been designed with support for the VESA Arm standard.
Refer to figure 2.5. Supports both 75mm and 100mm VESA dimension.
Figure 2.5: Swing-ARM