Advantech PIT-1701 User manual

Patient Infotainment Terminal Platform
Rev.0.1
Patient Infotainment Terminal
PIT-1701
User Manual

Patient Infotainment Terminal Platform
Rev.0.1
I. About This Guide
This user guide aims to describe the PIT-1701 series device in an
easy way to follow manner. It describes the hardware feature and
software settings for PIT-1701. Users will learn how to use the
PIT-1701 and its powerful features just by reading and following the
instructions in this guide.
Information is organized as followed :
1. About This Guide
This Chapter describes the organization of this manual.
2. Introduction
This Chapter briefly introduces the PIT-1701 product.
3. Hardware Description
This Chapter describes the hardware features of the PIT-1701.
4. Software Description
This Chapter describes the software features of the PIT-1701.
5. Design Requirements
This Chapter describes the design requirements of the PIT-1701.
6. Installation
This Chapter describes the installation of the PIT-1701.

Patient Infotainment Terminal Platform
Rev.0.1
II. Introduction
1. Overview
The PIT-1701 Patient Infotainment terminal is Advantech’s
standard product with a built-in Windows XP embeded OS. In
addition to the entertainment information access, Remote
Monitoring/Security and Home Service functions, the Intel Celeron
M 1.06GHz CPU speed and the LAN-enabled architectures can
achieve an integrated Home Gateway function. The PIT-1701
equipped with a Intel Celeron 1.06GHz processor, 17” touch screen,
onboard Ethernet and audio plays as the key of a home/ building
security & automation solution. It connects the service / emergency
calls and sensor signals of an apartment unit through the LAN to the
administration center.

Patient Infotainment Terminal Platform
Rev.0.1

Patient Infotainment Terminal Platform
Rev.0.1
III. Hardware Description
1. General Specifications
• Power adaptor: AC/DC
Input voltage: 100Vac~250Vac
Output voltage: 19V @ 3.42A
• Disk drive housing:
1. Space for one 2.5" HDD,
1.0 Standard PC functions
• CPU: Intel®Celeron M 1.06GHz
• BIOS: Award 256 KB Flash BIOS
• Chipset: Intel® 945GME + Intel®ICH-7M
• Front side bus: 533/667 MHz
• 2nd level cache: On-die 1MB L2 cache for Celeron M 1.06GHz CPU
• RAM: One 200-pin SODIMM DDRII sockets accept 32 ~ 1000 MB
DDR2 SDRAM
• SATA interface:
Support one SATA connector. The SATA host controller that
supports independent DMA operation on two ports and supports data
transfer rates of up to 3.0Gb/s. The SATA controller contains two modes
of operation-a legacy mode using I/Ospace, and an AHCImode using
memory space.

Patient Infotainment Terminal Platform
Rev.0.1
• Universal serial bus (USB) port: Supports up to four USB
ports(three on front side, one on rear side). All USB ports support USB
high-speed signaling. High-speed USB 2.0 allows data transfers up to
480Mb/s. All ports are high-speed, full-speed and low-speed capable.
• Mini PCI bus expansion slot: Accepts one type III mini PCI bus
card
• Battery: 3.0 V @ 195 mA lithium battery
• Audio interface: Microphone-in, Line-out
2.0 Mechanical Specifications
Dimensions of system: 459 (W) x 401 (H) x 73 (D) mm
-Front Cover:
-Rear Cover:

Patient Infotainment Terminal Platform
Rev.0.1
Dimensions of carton: 524 (W) x 567 (H) x 180 (D) mm
Fixing System: Back Box for Wall mounting
Gross Weight: 9.5 kg
Net Weight: 7.3 kg

Patient Infotainment Terminal Platform
Rev.0.1

Patient Infotainment Terminal Platform
Rev.0.1
IV. Outlook View
1. Front View
2. Rear View

Patient Infotainment Terminal Platform
Rev.0.1
3. I/O Port View
V. Hardware Specification Table
Items Specifications
CPU Intel Celeron M 1.06GHz
Panel type TFT color LCD
Screen Size 17” (Diagonal)
Resolution 1,280(H) x 1024 (V)
Luminance 300 nit (w/i TS)
Contrast Ratio 800:1
Display
Backlight MTBF 50,000 hours (typ)
Working 1 GB DDR2 SDRAMMemory Storage 2.5” SATA HDD 80G
Interface for
User LED Emergency LED on both sides
SIM card reader 1
Smart Card reader 1
USB Port 4
Interface for
System
Integrator MIC in jack 1
RJ-45 10/100Base T EthernetInterface to
the Internet
Windows XP
embeded YesEmbedded OS Windows XP Pro Yes
Power Comsumption < 60W
Dimension (W x H x D)

Patient Infotainment Terminal Platform
Rev.0.1
Weight
Operation Temperature
Certificates CE Class B

Patient Infotainment Terminal Platform
Rev.0.1
VI. Software Description
1. Windows XP embeded Software Spec
Real-Time OS Kernel
Win XP English Version
Device Drivers
CX 5530A Control
¾PCI to ISA Bridge
¾Graphics/video support for Intel PIII 1G
¾USB host controller
¾AC97 Codec Interface
ALC-200 Audio Codec
RTL8139C Ethernet Controller
Touch Screen Controller
LCD & Backlight Control
Video Capturing Circuit (BT878A) with GPIO ports
PCMCIA Controller
RS-232/422 Control & IRQ Service Routine
ASCII Terminal Support for debugging view
Embedded Application Software
Automatic Back-light Off
Web Browser

Patient Infotainment Terminal Platform
Rev.0.1
VII.Design Requirements
Environmental Specifications
Temperature & Humidity
9Operating Temperature: 0 ~ 45
oC
9Storage Temperature: 0 ~ 60
oC
9Relative Humidity: 0 ~ 95% RH
(Non-condensed)
Case / Panel Temperature
9Less than 40o C @ 25 oC ambient temperature (front
bezel)
9
Safety
9CE
9
EMI
9FCC class B approved
9
Vibration:
910~18Hz, 1.5mm peak-to-peak displacement
918~500Hz, 1G acceleration
Reliability
MTBF
920,000 hours
Touch Screen
91 million touch actuation times on a single point with a
5/8" diameter silicon finger under a 350g load at 2 Hz
Power Requirements
9DC Input Voltage: 19V

Patient Infotainment Terminal Platform
Rev.0.1
9Power Consumption: less than 60W