AEG BST18BX User manual

BST18BX
Original instructions

2
2
Important!
This appliance is not intended to be used or cleaned by persons with
reduced physical, sensory or mental capabilities, or lack of experience
or knowledge, unless they have been given instructions concerning the
safe use of the appliance by a person legally responsible for their safety.
They should be supervised whilst using the appliance.
Children shall not use, clean or play with this appliance, which when not
in use should be secured out of their reach.
It is essential that you read the instructions in this manual before
assembling, operating and maintaining the product.
Subject to technical modifications.

33
1. Speed control dial
2. Trigger switch
3. Lock-on button
4. Handle, insulated gripping
surface
5. LED button
6. Blower switch
7. Blade release lever
8. Orbital control dial
9. Blade clamp sleeve
10. Blade
11. Base assembly
12. Bevel lock Lever
13. Dust port
14. Battery port
1
7
8
9
10 11
12
13
6
234
5
14

4
4
19
1911
8
16
12

55
17
10
18
6
START
STOP
13
14

6
6
1
1
2
2
click
Remove the battery pack
before starting any work
on the machine.

77
75-100 %
50-75 %
25-50 %
0-25 %

8
8
1
2
Press the saw blade into the Fixtec holder up to the stops.

99
3
TEST

10
10
3
1
2
1
32

11 11
3
2
1
0
3
2
1
0
3
2
1
0
3
2
1
0

12
12
Line Start: Fully press the switch. Saw runs at reduced speeds until
blade engages workpiece. The saw speed will increase automatically
to provide the most efficient cut.
OFF: it is not possible to turn on
the saw.
900 min
-1
1500 min
-1
2100 min
-1
2800 min
-1
3500 min
-1
1 2 3 4 5

13 13

14
14
START
STOP
Insulated gripping surface

15 15
START LOCK STOP
2
1

16
16

17 17
1
2
click

18
18
1
2
2
1
3
Accessory

19 19
3
1
2
4
3
2
1
0

20
20
BATTERY AND CHARGER
Compatible battery pack
(not included)
Compatible charger
(not included)
L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
L1860B
L1860R-X5
L1890R
AL18G
AL1218G
BL1218
BLK1218
BL18DP-X5
BL18DP2-X5
Use AEG 18V battery and charger only
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury. Save all warnings and instructions
for future reference.
JIGSAW SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool “live” and could give
the operator an electric shock.
Use clamps or another practical way to secure and support the
workpiece to a stable platform. Holding the workpiece by hand or
against your body leaves it unstable and may lead to loss of control.
Wear a dust mask.
ADDITIONAL SAFETY WARNINGS
Dust and splinters must not be removed while the machine is running.
Never reach into the danger area of the tool when it is running.
Do not dispose of used battery packs in the household refuse or
by burning them. AEG Distributors oer to retrieve old batteries to
protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System AEG chargers for charging System AEG battery
TECHNICAL DATA CORDLESS jigsaw BTS18BX
Rated voltage 18V
Stroke rate under no load 0-3500 min-1
Length of stroke 25.4 mm
Maximum bevel 45°
Maximum cutting depth
in wood 135 mm
in metal 10 mm
in aluminium 20 mm
Weight - not including battery pack 2 kg
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
A-weighted sound pressure level L
P= 84.5 dB(A)
Uncertainty K 3 dB(A)
A-weighted sound power level LW= 95.5 dB(A)
Uncertainty K 3 dB(A)
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 60745:
Vibration emission value
Cutting boards ah,B = 4.2 m/s2
Uncertainty K 1.5 m/s2
Cutting sheet metal ah,M = 2.2 m/s2
Uncertainty K 1.5 m/s2
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level
represents the main applications of the tool. However if the tool is used for dierent applications, with dierent accessories or poorly maintained,
the vibration emission may dier. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running but
not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.