AGCO Glencoe CC4450 User manual

Glencoe®
CC4450 COMBINATION
CHISEL PLOW
(S/N 3676 & UP)
OPERATOR’S
MANUAL
Form No. 1PD654399
April, 1999

Table of Contents
INTRODUCTION
DEALER/CUSTOMER INFORMATION
TO THE DEALER:,TO THE CUSTOMER: ....................2
SAFETY
GENERAL OPERATION .............................3
DECAL INFORMATION & LOCATION......................5
ROCKSHAFT LOCKUP OPERATION, SMV SIGN ...............6
OPERATION
TRACTOR AND CHISEL PLOW PREPARATION ................7
ATTACHING TO TRACTOR ...........................8
UNHITCHING FROM TRACTOR ........................10
FOLDING AND UNFOLDING WINGS .....................11
DEPTH CONTROL ...............................11
LIFT CYLINDER OPERATION .........................11
CHISEL PLOWING ...............................12
DISC CUTTER OPERATION ..........................12
MEASURING CROP RESIDUE.........................13
ADJUSTMENTS
LEVELING THE CHISEL PLOW ........................15
GAUGE WHEELS................................16
DISC CUTTERS ................................17
SPRING CUSHION CLAMPS..........................17
AUTO-RESET CLAMPS ............................17
SERVICE
GENERAL MAINTENANCE ..........................19
LUBRICATION .................................19
TROUBLESHOOTING .............................21
BOLT TORQUE CHECKING INTERVALS ...................23
TRANSPORT LIGHTING WIRING DIAGRAM .................24
SPECIAL TORQUE VALUES ..........................25
OPTIONS
COULTER CUTTERS, LEVELING BAR, DEEP-TILL SHANKS ........26
DEPTH CONTROL SYSTEM, SHANK POINTS, SHANK EXTENSIONS ...27
SPECIFICATIONS
RIGID AND FOLDING MODELS ........................28
i

ii

INTRODUCTION
The Model CC4450 Combination Chisel Plow is a highly versatile primary tillage tool, adaptable to spring or
fall tillage operations. Rigid-frame models are available in cutting widths from 7’ to 18
12
’ with 12" or 15" shank
spacing. Folding-frame models include 19,’ 21’ and 23’ cutting widths with 12" shank spacing.
When equipped with concave disc cutters and twisted shovels with 12" shank spacing, the CC4450
aggressively buries residue. When equipped with rippled disc coulters and straight points with 15" shank
spacing, the implement leaves residue on top for conservation tillage.
Options include a leveling bar for follow-up planting and deep-till shanks for breaking up compacted soil.
This manual contains information necessary for correct adjustment and safe operation of your
implement. Read it carefully.
This manual should remain with the machine when sold.
This manual was prepared from the latest product information available at publication time. The
Company reserves the right to make changes at any time without notice or obligation.
1
Fig. 1 - Rigid 15’ Model with Rippled Disc Cutters
and Deep-Till Shanks
Fig. 2 - Folding 23’ Model with Concave Disc Cutters
C445-2-1C445-1-1