Agilent Technologies TS-8989 PXI User manual

Agilent Technologies
Agilent TS-8989 PXI
Functional Test System
Diagnostics User’s Guide

II TS-8989 Diagnostics User’s Guide
Notices
© Agilent Technologies Inc. 2014
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Agilent
Technologies Inc. as governed by United
States and international copyright laws.
Manual Part Number
U8989-90003
Edition
First Edition, January 22, 2014
Printed in Malaysia
Agilent Technologies Microwave Products
(Malaysia) Sdn. Bhd.
Bayan Lepas Free Industrial Zone
11900, Penang, Malaysia
Warranty
The material contained in this document is
provided “as is,” and is subject to change,
without notice, in future editions. Further,
to the maximum extent permitted by the
applicable law, Agilent disclaims all war-
ranties, either express or implied, with
regard to this manual and any information
contained herein, including but not limited
to the implied warranties of merchantabil-
ity and fitness for a particular purpose.
Agilent shall not be liable for errors or for
incidental or consequential damages in
connection with the furnishing, use, or
performance of this document or of any
information contained herein. Should Agi-
lent and the user have a separate written
agreement with warranty terms covering
the material in this document that conflict
with these terms, the warranty terms in
the separate agreement shall control.
Technology Licenses
The hardware and or software described in
this document are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
Restricted Rights Legend
U.S. Government Restricted Rights. Soft-
ware and technical data rights granted to
the federal government include only those
rights customarily provided to end user cus-
tomers. Agilent provides this customary
commercial license in Software and techni-
cal data pursuant to FAR 12.211 (Technical
Data) and 12.212 (Computer Software) and,
for the Department of Defense, DFARS
252.227-7015 (Technical Data - Commercial
Items) and DFARS 227.7202-3 (Rights in
Commercial Computer Software or Com-
puter Software Documentation).
Safety Notices
CAUTION
A CAUTION notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the likes
of that, if not correctly performed
or adhered to, could result in dam-
age to the product or loss of impor-
tant data. Do not proceed beyond a
CAUTION notice until the indicated
conditions are fully understood and
met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the likes of that, if not correctly
performed or adhered to, could
result in personal injury or death.
Do not proceed beyond a WARN-
ING notice until the indicated
conditions are fully understood
and met.

TS-8989 Diagnostics User’s Guide III
Table of Contents
1 Legal Information
Warranty 2
Technology Licenses 2
Restricted Rights Legend 3
Service and Support 4
Agilent on the web 4
Agilent by phone 4
2 Safety and Regulatory Information
Safety Summary 6
Safety Notices 6
General Safety Considerations 7
Environmental Conditions 8
Before Applying Power 9
Ground the System 9
Fuses 9
Operator Safety Information 10
Safety Symbols and Regulatory Markings 11
Declaration of Conformity 13
Electrostatic Discharge (ESD) Precautions 14
End of Life: Waste Electrical and Electronic Equipment (WEEE)
Directive 2002/96/EC 15
3 Running Diagnostics
Overview of Diagnostics Testplans 18

IV TS-8989 Diagnostics User’s Guide
Standard instruments and the system.ust file 18
Configuring the system.ust file in the System Configuration
Editor 20
Configuring and Running the DGN Testplan 21
Configuring and Running the CEDGN Testplan 23
Installing the Diagnostic Test Fixtures 25
Installing the CEDGN fixture kit bracket 32
Resolving Test Failures 36
4 Diagnostic Testing Details
DGN Testplan Description and Flow 38
Sequence 00: Global Reset 38
Sequence 01: SLU Detection 38
Sequence 02: PXI and PCI Modules Detection 38
Sequence 03: Instrument Matrix Detection 38
Sequence 04: DMM Detection and Test 39
Sequence 05: Pin Matrix Switching Test 39
CEDGN Testplan Description and Flow 48
Sequence 00: Global Reset 48
Sequence 01: SLU Detection 48
Sequence 02: PXI & PCI Modules Detection 48
Sequence 03: Instrument Matrix Detection 48
Sequence 04: DMM Detection & Test 49
Sequence 05: Pin Matrix Switching Test 49
Sequence 06: SLU Utility Test 49
Sequence 07: PXI Modules Test 50
Sequence 08: PCI Modules Test 58
Sequence 09: Load Card Test 60
5 Diagnostic Test Fixture Details
U8989-61625 E8792A/E8793A Pin Matrix Cable 96

TS-8989 Diagnostics User’s Guide V
U8989-61619 E8782A/E8783A Pin Matrix Cable 98
U8989-61620 SLU Utility Cable 101
U8989-61621 24/16/8 Channel Load Card Cable 103
U8989-61622 48 Channel Load Card Cable 106
U8989-61623 Universal Instrument Routing Card Cable 109
U8989-61624 Heavy Duty Load Card Cable 113

VI TS-8989 Diagnostics User’s Guide
THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK.

TS-8989 Diagnostics User’s Guide VII
List of Figures
Figure 2-1 Examples of exposed connectors 10
Figure 3-1 Configure DUT power supply in the CEDGN testplan 24
Figure 3-2 Installing the U8989-61625 CEDGN Test Fixture 25
Figure 3-3 Installing the SLU Utility U8989-61620 CEDGN Test
Fixture with a U8989-61625 CEDGN Pin Matrix
Cable 26
Figure 3-4 Installing the Load Card U8989-61 1 CEDGN Test Fixture
with a U8989-61625CEDGN Pin Matrix Cable 27
Figure 3-5 Installing the Load Card ISense U8989-61621 CEDGN
Test Fixtures with a U8989-61625 CEDGN Pin Matrix
Cable 28
Figure 3-6 Installing the Heavy Duty Load Card U8989-61624
CEDGN Test Fixture with a U8989-61625 CEDGN Pin
Matrix Cable 29
Figure 3-7 Installing the 48-Channel Load Card U8989-61622
CEDGN Test Fixture with a U8989-61625 CEDGN in
Matrix Cable 30
Figure 3-8 Installing the Instrument Routing Card U8989-61623
CEDGN Test Fixture with a U8989-61625 CEDGN Pin
Matrix Cable 31
Figure 3-9 Overview of the CEDGN Fixture Kit Bracket 32
Figure 3-10 CEDGN Fixture Kit Bracket Installation Step 1 33
Figure 3-11 CEDGN Fixture Kit Bracket Installation Step 2 33
Figure 3-12 CEDGN Fixture Kit Bracket Installation Step 3 34
Figure 3-13 CEDGN Fixture Kit Bracket Installation Step 4 34
Figure 3-14 CEDGN Fixture Kit Bracket Installation Step 5 35
Figure 3-15 CEDGN Fixture Kit Bracket Installation Step 6 35
Figure 4-1 Instrument Matrix Inst1 and Inst2 Pin Test 40
Figure 4-2 ABUS Short Test 41
Figure 4-3 Instrument Matrix Inst3 and Inst4 Pin Test 41
Figure 4-4 Instrument Matrix DAC Relay Test 42
Figure 4-5 Instrument Rows Open/Short Test 43
Figure 4-6 Measurement Rows Open/Short Test 44
Figure 4-7 Bypass Relays Test 45
Figure 4-8 Pin Matrix Fixture Test (Row Pin) 46

VIII TS-8989 Diagnostics User’s Guide
Figure 4-9 Pin Matrix Fixture Test (Aux Pin) 47
Figure 4-10 DAC Output Port Test 51
Figure 4-11 DAC Output Sense Port Test 51
Figure 4-12 DAC Trigger Port Test 52
Figure 4-13 DMM Internal Switching Connection Test 53
Figure 4-14 VI Voltage and Current Test - VI Interlock
Connection 54
Figure 4-15 DIO DI DO Test 55
Figure 4-16 DIO GND Test 56
Figure 4-17 DIO Vex Test 56
Figure 4-18 DAQ Input Port Test 57
Figure 4-19 DAQ Aux Port Test 58
Figure 4-20 AD1750 Test 59
Figure 4-21 Softing CAN Test 60
Figure 4-22 E6175A Unpowered Load Card Test 62
Figure 4-23 E6175A Powered Load Card Test 63
Figure 4-24 E6175A Current Sense Test 64
Figure 4-25 E6176A Unpowered Load Card Test 66
Figure 4-26 E6176A Powered Load Card Test 67
Figure 4-27 E6176A Current Sense Test 68
Figure 4-28 E6177A Unpowered Load Card Test 70
Figure 4-29 E6177A Powered Load Card Test 71
Figure 4-30 U7177A Unpowered Load Card Test 73
Figure 4-31 U7177A Powered Load Card Test 74
Figure 4-32 U7177A Current Sense Test 75
Figure 4-33 N9377A Unpowered Load Card Test 77
Figure 4-34 N9377A Powered Load Card Test 78
Figure 4-35 N9377A Current Sense Test 79
Figure 4-36 N9378A Unpowered Load Card Test 81
Figure 4-37 N9378A Powered Load Card Test 82
Figure 4-38 U7179A Unpowered Load Card Test 84
Figure 4-39 U7179A Powered Load Card Test 85
Figure 4-40 U7179A Current Sense Test 86
Figure 4-41 N9379A Unpowered Load Card Test 88
Figure 4-42 E6178B Unpowered Load Card Test 90
Figure 4-43 E6178B Current Sense Test 91
Figure 4-44 U7178A Unpowered Load Card Test 93
Figure 4-45 U7178A Current Sense Test 94

TS-8989 Diagnostics User’s Guide IX
Figure 5-1 U8989-61625 E8792A/E8793A Pin Matrix Cable 96
Figure 5-2 U8989-61625 E8792A/E8793A Pin Matrix Cable
Schematic 96
Figure 5-3 U8989-61619 E8782A/E8783A Pin Matrix Cable 98
Figure 5-4 U8989-61619 E8782A/E8783A Pin Matrix Cable
Schematic 99
Figure 5-5 U8989-61620 SLU Utility Cable 101
Figure 5-6 U8989-61620 SLU Utility Cable Schematic 101
Figure 5-7 U8989-61621 24/16/8 Channel Load Card Cable 103
Figure 5-8 U8989-61621 24/16/8 Channel Load Card Cable
Schematic 104
Figure 5-9 U8989-61622 48 Channel Load Card Cable 106
Figure 5-10 U8989-61622 48 Channel Load Card Cable
Schematic 107
Figure 5-11 U8989-61623 Universal Instrument Routing Card
Cable 109
Figure 5-12 U8989-61623 Universal Instrument Routing Card Cable
Schematic 110
Figure 5-13 U8989-61624 Heavy Duty Load Card Cable 113
Figure 5-14 U8989-61624 Heavy Duty Load Card Cable
Schematic 113

X TS-8989 Diagnostics User’s Guide
THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK.

TS-8989 Diagnostics User’s Guide XI
List of Tables
Ta b l e 2- 1 General environmental requirements 8
Ta b l e 2- 2 Safety symbols and regulatory markings 11
Ta b l e 2- 3 Suggested anti-static solutions for site planning 14
Ta b l e 3- 1 List of standard instruments in the TS-8989 system 19
Ta b l e 4- 1 V/I source output value 53
Ta b l e 5- 1 U8989-61625 Cable Pinout 97
Ta b l e 5- 2 U8989-61619 Cable Pinout 100
Ta b l e 5- 3 U8989-61620 Cable Pinout 102
Ta b l e 5- 4 U8989-61621 Cable Pinout 105
Ta b l e 5- 5 U8989-61622 Cable Pinout 108
Ta b l e 5- 6 U8989-61623 Cable Pinout 111
Ta b l e 5- 7 U8989-61624 Cable Pinout 114

XII TS-8989 Diagnostics User’s Guide
THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK.

1
TS-8989 PXI Functional Test System
Diagnostics User’s Guide
Agilent Technologies
1
Legal Information
Warranty 2
Technology Licenses 2
Restricted Rights Legend 3
Service and Support 4
Agilent on the web 4
Agilent by phone 4

1 Legal Information
Warranty
2 TS-8989 Diagnostics User’s Guide
Warranty
The material contained in this document is provided “as is,”
and is subject to being changed, without notice, in future
editions.
Further, to the maximum extent permitted by applicable law,
Agilent disclaims all warranties, either express or implied,
with regard to this manual and any information contained
herein, including but not limited to the implied warranties of
merchantability and fitness for a particular purpose.
Agilent shall not be liable for errors or for incidental or
consequential damages in connection with the furnishing,
use, or performance of this document or of any information
contained herein.
Should Agilent and the user have a separate written
agreement with warranty terms covering the material in this
document that conflict with these terms, the warranty terms
in the separate agreement shall control.
Technology Licenses
The hardware and/or software described in this document
are furnished under a license and may be used or copied
only in accordance with the terms of such license.

Legal Information 1
Restricted Rights Legend
TS-8989 Diagnostics User’s Guide 3
Restricted Rights Legend
If software is for use in the performance of a U.S.
Government prime contract or subcontract, Software is
delivered and licensed as “Commercial computer software”
as defined in DFAR 252.227- 7014 (June 1995), or as a
“commercial item” as defined in FAR 2.101(a) or as
“Restricted computer software” as defined in FAR 52.227- 19
(June 1987) or any equivalent agency regulation or contract
clause. Use, duplication, or disclosure of Software is subject
to Agilent Technologies’ standard commercial license terms,
and non- DOD Departments and Agencies of the U.S.
Government will receive no greater than Restricted Rights as
defined in FAR 52.227- 19(c)(1- 2)(June 1987). U.S.
Government users will receive no greater than Limited
Rights as defined in FAR 52.227- 14 (June 1987) or DFAR
252.227- 7015 (b)(2)(November 1995), as applicable in any
technical data.

1 Legal Information
Service and Support
4 TS-8989 Diagnostics User’s Guide
Service and Support
Any adjustment, maintenance, or repair of this product must
be performed by qualified personnel. Contact your customer
engineer through your local Agilent Service Center.
Agilent on the web
You can find information about technical and professional
services, product support, and equipment repair and service
on the web: http://www.agilent.com/
Double- click the link to Test & Measurement. Select your
country from the drop- down menus. The web page that
appears next has contact information specific for your
country.
Agilent by phone
If you do not have access to the Internet, call one of the
numbers in the “Contact us” section at the end of this
manual.

5
TS-8989 PXI Functional Test System
Diagnostics User’s Guide
Agilent Technologies
2
Safety and Regulatory Information
Safety Summary 6
Safety Notices 6
General Safety Considerations 7
Environmental Conditions 8
Before Applying Power 9
Ground the System 9
Fuses 9
Operator Safety Information 10
Safety Symbols and Regulatory Markings 11
Declaration of Conformity 13
Electrostatic Discharge (ESD) Precautions 14
End of Life: Waste Electrical and Electronic Equipment (WEEE) Directive
2002/96/EC 15

2 Safety and Regulatory Information
Safety Summary
6 TS-8989 Diagnostics User’s Guide
Safety Summary
The following general safety precautions must be observed
during all phases of operation of this instrument. Failure to
comply with these precautions or with specific warnings
elsewhere in this manual violates safety standards of design,
manufacture, and intended use of the instrument. Agilent
Technologies, Inc. assumes no liability for the customer's
failure to comply with these requirements.
Safety Notices
CAUTION
A CAUTION notice denotes a hazard. It calls attention to an operating
procedure, practice, or the like, that, if not correctly performed or
adhered to, could result in damage to the product or loss of important
data. Do not proceed beyond a CAUTION notice until the indicated
conditions are fully understood and met.
WARNING
A WARNING notice denotes a hazard. It calls attention to an
operating procedure, practice, or the like that, if not correctly
performed or adhered to, could result in personal injury or death. Do
not proceed beyond a WARNING notice until the indicated conditions
are fully understood and met.

Safety and Regulatory Information 2
General Safety Considerations
TS-8989 Diagnostics User’s Guide 7
General Safety Considerations
This product is provided with a protective earth terminal.
The protective features of this product may be impaired if it
is used in a manner not specified in the operation
instructions.
WARNING
• DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE. Do not
operate the product in the presence of flammable gases or flames.
• DO NOT REMOVE RACK PANELS OR INSTRUMENT COVERS.
Operating personnel must not remove any rack panels or
instrument covers. Component replacement and internal
adjustments must be made only by qualified service personnel.
Products that appear damaged or defective should be made
inoperative and secured against unintended operation until they
can be repaired by a qualified service personnel.
• The protection provided by the TS-8989 system may be impaired if
the system is used in a manner not specified by Agilent.

2 Safety and Regulatory Information
Environmental Conditions
8 TS-8989 Diagnostics User’s Guide
Environmental Conditions
The TS- 8989 Automotive Electronics PXI Functional Test
System is designed for indoor use only. Table 2- 1 shows the
general environmental requirements.
Table 2- 1 General environmental requirements
Environment condition Requirement
Maximum altitude 2000 meters
Operating temperature 5 °C to 40 °C
Relative humidity
The test system is designed to operate in the
range from 5% to 80% relative humidity
(non-condensing)
CAUTION
This product is designed for use in Installation Category II and
Pollution Degree 2, per IEC 61010-1 and 664 respectively.