Akuvox R26B Manual

R26B Door Phone Admin Guide

About this manual
Thank you for choosing Akuvox’s R26B door phone. This manual is intended for end userswho need to properly configure the door
phone. This manualis applicable to 26.31.4.xx version, and it provides all functions’ configurations of R26B. Please visit Akuvox
forum or consult technical support for any new information or latest firmware.
Note: Please refer to universal abbreviation form in the end of manual when meet any abbreviation letter.

Content
1. Product Overview...............................................................................................................................................................................................1
1.1. Product Description................................................................................................................................................................................... 1
1.2. Connector Introduction..............................................................................................................................................................................1
1.3. LED Status Information............................................................................................................................................................................. 2
2. Daily Use...............................................................................................................................................................................................................3
2.1. Making a Call.............................................................................................................................................................................................. 3
2.2. Receiving a Call......................................................................................................................................................................................... 3
2.3. Unlock.......................................................................................................................................................................................................... 4
2.3.1. Unlock by RFID Cards.................................................................................................................................................................... 4
2.3.2. Unlock by DTMF Codes................................................................................................................................................................. 4
3. Basic Setting....................................................................................................................................................................................................... 5
3.1. Getting Started........................................................................................................................................................................................... 5
3.1.1. IP Announcement............................................................................................................................................................................ 5
3.1.2. Access the device website............................................................................................................................................................. 5
3.2. Password Modification.............................................................................................................................................................................. 6

3.2.1. Modify the Web Password............................................................................................................................................................. 6
3.3. Phone Configuration..................................................................................................................................................................................6
3.3.1. Language.......................................................................................................................................................................................... 6
3.3.2. Time................................................................................................................................................................................................... 7
3.3.3. Network............................................................................................................................................................................................. 7
3.3.3.1. VLAN.............................................................................................................................................................................................. 9
3.3.3.2. TR069.......................................................................................................................................................................................... 10
3.3.4. Sound.............................................................................................................................................................................................. 11
3.3.5. DND................................................................................................................................................................................................. 12
3.4. Intercom Call............................................................................................................................................................................................ 13
3.4.1. Direct IP Call.................................................................................................................................................................................. 13
3.4.2. SIP Call........................................................................................................................................................................................... 14
3.4.2.1. SIP Account.................................................................................................................................................................................14
3.4.2.2. SIP Server 1&2...........................................................................................................................................................................15
3.4.2.3. Outbound Proxy Server............................................................................................................................................................ 15
3.4.2.4. Transport Type............................................................................................................................................................................15
3.4.2.5. NAT...............................................................................................................................................................................................16

3.4.3. Auto Answer................................................................................................................................................................................... 16
3.4.4. Web Call......................................................................................................................................................................................... 17
3.4.5. Push To Hang Up.......................................................................................................................................................................... 17
3.5. Security......................................................................................................................................................................................................17
3.5.1. Live view......................................................................................................................................................................................... 17
3.5.2. RTSP............................................................................................................................................................................................... 18
3.5.3. ONVIF............................................................................................................................................................................................. 19
3.6. Access Control......................................................................................................................................................................................... 20
3.6.1. Relay............................................................................................................................................................................................... 20
3.6.2. Card Setting................................................................................................................................................................................... 21
3.6.3. Open Relay via HTTP...................................................................................................................................................................22
3.6.4. Unlock via Exit Button...................................................................................................................................................................23
3.7. Reboot....................................................................................................................................................................................................... 24
3.8. Reset..........................................................................................................................................................................................................24
4. Advance Feature.............................................................................................................................................................................................. 25
4.1. Phone Configuration............................................................................................................................................................................... 25
4.1.1. LED.................................................................................................................................................................................................. 25

4.1.2. IR LED.............................................................................................................................................................................................26
4.1.3. RF Card Code Display Related...................................................................................................................................................27
4.2. Intercom.................................................................................................................................................................................................... 27
4.2.1. Call Time Related.......................................................................................................................................................................... 27
4.2.2. Return Code When Refuse..........................................................................................................................................................28
4.2.3. SIP Call Related............................................................................................................................................................................ 28
4.2.4. Codec.............................................................................................................................................................................................. 29
4.2.5. DTMF...............................................................................................................................................................................................30
4.2.6. Session Timer................................................................................................................................................................................ 31
4.2.7. Encryption.......................................................................................................................................................................................31
4.2.8. NAT.................................................................................................................................................................................................. 31
4.2.9. User Agent...................................................................................................................................................................................... 32
4.3. Access Control......................................................................................................................................................................................... 33
4.3.1. Web Relay...................................................................................................................................................................................... 33
4.4. Security......................................................................................................................................................................................................34
4.4.1. Anti-alarm....................................................................................................................................................................................... 34
4.4.2. Motion..............................................................................................................................................................................................35

4.4.3. Action...............................................................................................................................................................................................35
4.4.3.1. Action Parameters..................................................................................................................................................................... 35
4.4.3.2. Push Button Action.................................................................................................................................................................... 37
4.4.3.3. Input Interface Triggered Action...............................................................................................................................................38
4.4.3.4. Motion Triggered Action............................................................................................................................................................ 38
4.4.3.5. Action URL.................................................................................................................................................................................. 38
4.5. Upgrade.....................................................................................................................................................................................................39
4.5.1. Web Upgrade................................................................................................................................................................................. 39
4.5.2. Autop Upgrade...............................................................................................................................................................................40
4.5.3. Backup Config File........................................................................................................................................................................ 42
4.5.4. DHCP Option................................................................................................................................................................................. 42
4.6. Log............................................................................................................................................................................................................. 43
4.6.1. Call log............................................................................................................................................................................................ 43
4.6.2. Door Log......................................................................................................................................................................................... 43
4.6.3. System Log.....................................................................................................................................................................................43
4.6.4. PCAP...............................................................................................................................................................................................44

1
R26B
Admin Guide
1. Product Overview
1.1. Product Description
Akuvox R26B is a SIP-compliant, hands-free, five buttons door
phone. It can be connected with Akuvox indoor monitors for remote
unlock control and monitor. Users can operate the indoor phone to
communicate with visitors via voice and video. Users can also use
RFID cards to unlock the door It’s applicable in villas, office and so
on.
1.2. Connector Introduction
Ethernet (POE): Ethernet (POE) connector, which can provide both
power and network connection.
12V/GND: External power supply terminal if POE is not available.
RS485 A/B: RS485 terminal.
Figure 1.2-1 R26B’s interface
Figure 1.1 Product Description

2
R26B
Admin Guide
DOOR A/B: Trigger signal input terminal.
Relay A/B (NO/NC/COM): Relay control terminal.
Note: The general door phone interface diagram is only for
reference.
1.3. LED Status Information
LED Status Description
Blue Always on Normal status
Flashing Calling
Red Flashing Network is unavailable
Green Always on Talking on a call
Flashing Receiving a call
Pink Flashing Upgrading
Figure 1.2-2 General interface

3
R26B
Admin Guide
2. Daily Use
2.1. Making a Call
Press one of the call buttons to call out the predefined SIP account
or IP address and if LED turns green, it means the call has been
answered.
2.2. Receiving a Call
User can use IP phone or indoor monitor to call R26B and R26Bwill
answer it automatically by default. If user disable auto answer,
pressing button to answer incoming call.

4
R26B
Admin Guide
2.3. Unlock
2.3.1. Unlock by RFID Cards
Place the predefined user cards in RFID card reader to unlock.
Under normal conditions, R26B will announce “The door is now
opened.” 13.56 MHz RF card is supported on R26B.
2.3.2. Unlock by DTMF Codes
Users can press the predefined DTMF code from an answer unit to
remotely unlock the door during the call. Users will also hear “The
door is now opened.”

5
R26B
Admin Guide
3. Basic Setting
3.1. Getting Started
3.1.1. IP Announcement
While R26B starts up normally, hold the top of call button for several
seconds after the Status LED turns blue, voice system will enter IP
announcement mode. In announcement mode, the IP address will
be announced periodically and “IP 0.0.0.0” would be announced if
no IP address is gained. Press call button again to quit the
announcement mode.
3.1.2. Access the device website
Open a web browser, and access the corresponding IP address.
Enter the default user name and password to login. The default
administrator User Name and Password are shown below:
Figure 3.1.2 Access the device website

6
R26B
Admin Guide
User Name: admin
Password: admin
Note: The recommended browser is Google Chrome.
3.2. Password Modification
3.2.1. Modify the Web Password
Go to Security - Basic to modify password for webpage. To modify
password for“admin” or “user” account.
3.3. Phone Configuration
3.3.1. Language
Go to Phone-Time/Lang to select language for webpage.
Figure 3.2.1 Modify the web password
Figure 3.3.1Language

7
R26B
Admin Guide
3.3.2. Time
Go to Phone - Time/Langto configure it.
Time Zone: To select local time zone for NTP server.
Primary Server: To configure primary NTP server address.
Secondary Server: To configure secondary NTP server address, it
takes effect if primary NTP server is unreachable.
Update Interval: To configure interval between two
consecutive NTP requests.
System Time: The current time of the phone.
3.3.3. Network
DHCP Mode
In website, go to Network - Basic.
Figure 3.3.3.1 Static IP mode
Figure 3.3.2 Time

8
R26B
Admin Guide
R26B uses DHCP mode by default which will get IP address,
subnet mask, default gateway and DNS server address from DHCP
server automatically.
Static IP Mode
In Website, go to Network - Basic.
If select static IP, users should manually setup IP address, subnet
mask, default gateway and DNS server address. The figure right
shows static IP settings.
Local RTP
Go to Network - Advanced to configure.
Local RTP:To display and configure local RTP settings.
Starting RTP Port: Determine the minimum port that RTP stream
can use.
Max RTP Port: Determine the maximum port that RTP stream can
use.
Figure 3.3.3-2 Local RTP

9
R26B
Admin Guide
SNMP
Go to Network - Advanced to configure.
SNMP:To display and configure SNMP settings.
Active: To enable or disable SNMP feature.
Port: To configure SNMP server’s port.
Trusted IP: To configure allowed SNMP server address. It could be
an IP address or any valid URL domain name.
Note: SNMP is Internet-standard protocol for managing devices on
IP networks.
3.3.3.1. VLAN
Go to Network - Advanced to configure.
VLAN:To display and configure VLAN settings.
Active: To enable or disable VLAN feature for designated port.
VID: To configure VLAN ID for designated port.
Priority: To select VLAN priority for designated port.
Figure 3.3.3.1 VLAN
Figure 3.3.3-3 SNMP

10
R26B
Admin Guide
Note: Please consult administrator for specific VLAN settings in the
networking environment.
3.3.3.2. TR069
Go to Network - Advanced to configure.
TR069:To display and configure TR069 settings.
Active: To enable or disable TR069 feature.
Version: To select supported TR069 version (version 1.0 or 1.1).
ACS/CPE: ACS is short for auto configuration servers as server
side, and CPE is short for customer-premise equipment as client
side devices.
URL:To configure URL address for ACS or CPE.
User Name: To configure username for ACS or CPE.
Password: To configure password for ACS or CPE.
Periodic Inform: To enable periodically inform.
Periodic Interval: To configure interval for periodic inform.
Figure 3.3.3.2 TR069

11
R26B
Admin Guide
Note:TR-069 is a technical specification entitled CPE WAN
Management Protocol (CWMP).It defines an application layer
protocol for remote management of end-user devices.
3.3.4. Sound
Go to Phone-Voice to configure volume and upload tone file.
Mic Volume: To configure microphone volume.
Speaker Volume:To configure speaker volume.
Open Door Warning: Disable it, and users will not hear the prompt
voice when the door is opened.
RingBack Upload: To upload the ring back tone by users
themselves.
Opendoor Tone Upload: To upload the opendoor tone by users
themselves.
Figure 3.3.4 Sound

12
R26B
Admin Guide
3.3.5. DND
Go to Phone - Call Featureto configure DND feature.
DND:DND allows phones to ignore any incoming calls.
Return Code when DND: Determine what response code should
be sent back to server when there is an incoming call if DND is on.
DND On Code: The code is used to turn on DND on server’s side, if
configured, door phones will send a SIP message to server to turn
on DND on server side if users press DND when DND is off.
DND Off Code: The code is used to turn off DND on server’s side,
if configured, door phones will send a SIP message to server to turn
off DND on server side if users press DND when DND is on.
Figure 3.3.5 DND

13
R26B
Admin Guide
3.4. Intercom Call
3.4.1. Direct IP Call
Without sip server, users can also use IP address to call each other,
but this way is only suitable in the LAN.
Go to Phone - Call Feature to enable the direct IP call for door
phones first.
Go to Intercom - Basic to configure the IP address of the
destination(E.g.IP address 192.168.10.91).One button for each
button.After, press the push button to make direct IP call.
Note: The push button number can also enter the SIP account.
Figure 3.4.1-1 Direct IP call
Figure 3.4.1-2 Push button