Alinx ZYNQ UltraScale+ User manual

ZYNQ UltraScale+
FPGA Development Board
AXU5EV-P
User Manual

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
2 / 66
www.alinx.com
Version Record
Version
Date
Release By
Description
Rev 1.0
2021-06-17
Rachel Zhou
First Release

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
3 / 66
www.alinx.com
Table of Contents
Version Record.......................................................................................................2
Part 1: FPGA Development Board Introduction............................................... 7
Part 2: ACU5EV core board...............................................................................12
Part 2.1: ACU5EV core board Introduction.............................................12
Part 2.2: ZYNQ Chip...................................................................................13
Part 2.3: DDR4 DRAM............................................................................... 15
Part 2.4: QSPI Flash...................................................................................22
Part 2.5: eMMC Flash.................................................................................23
Part 2.6: Clock configuration..................................................................... 25
Part 2.7: LED................................................................................................27
Part 2.8: Power Supply...............................................................................28
Part 2.9: ACU5EV Core Board Size Dimension.................................... 29
Part 2.10: Board to Board Connectors pin assignment........................29
Part 3: Carrier Board...........................................................................................38
Part 3.1: Carrier Board Introduction.........................................................38
Part 3.2: M.2 Interface................................................................................38
Part 3.3: DP Interface................................................................................. 39
Part 3.4: USB3.0 Interface.........................................................................41
Part 3.5: Gigabit Ethernet Interface......................................................... 42
Part 3.6: USB to Serial Port.......................................................................44
Part 3.7: SD Card Slot Interface...............................................................46
Part 3.8: HDMI Output Interface...............................................................47
Part 3.9: HDMI Input Interface.................................................................. 48
Part 3.10: SFP Interface.............................................................................50
Part 3.11: PCIe Slot.................................................................................... 52
Part 3.12: CAN Communication Interface.............................................. 53
Part 3.13: 485 Communication Interface................................................ 54

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
4 / 66
www.alinx.com
Part 3.14: MIPI Camera Interface............................................................ 55
Part 3.15: FMC Interface............................................................................56
Part 3.16: JTAG Debug Port......................................................................59
Part 3.17: Real-time Clock.........................................................................60
Part 3.18: EEPROM and Temperature Sensor......................................60
Part 3.19: User LEDs..................................................................................61
Part 3.20: Keys............................................................................................ 62
Part 3.21: DIP Switch Configuration........................................................ 63
Part 3.22: Power Supply............................................................................ 64
Part 3.23: ALINX Customized Fan........................................................... 65
Part 3.24: Carrier Board Size Dimension................................................66

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
5 / 66
www.alinx.com
This MPSoCs FPGA development platform adopts the core board + carrier
board mode, which is convenient for users to use the core board for secondary
development. The core board uses XILINX Zynq UltraScale+ EV chip ZU5EV
solution, uses Processing System(PS)+Programmable Logic(PL) technology to
integrate dual-core ARM ARM Cortex-A53 and FPGA programmable logic on a
single chip. In addition, the PS side of the core board has 4 pieces of 1GB
high-speed DDR4 SDRAM chips, 1 piece of 8GB eMMC memory chip and 1
piece of 256Mb QSPI FLASH chip; the PL side of the core board has 1 piece of
1GB DDR4 SDRAM chip
In the design of carrier board, we have extended a wealth of interfaces for
users, such as 1 FMC LPC interface, 1 SATA M.2 interface, 1 DP interface, 1
PCIe x 2 Interfaces, 2 SPF+ Interfaces, 4 USB 3.0 Interface, 2 Gigabit Ethernet
interfaces, 1 HDMI Input Interface, 1 HDMI Output Interface, 2 Uart Interfaces,
1 SD card slot, 2-Channel CAN bus interfaces, 2-Channel RS485 bus
interfaces, 1 MIPI Camera Interface. It meets users' requirements for
high-speed data exchange, data storage, Video transmission processing, deep
learning, artificial intelligence and industrial control. It is a "professional" ZYNQ
development platform. For high-speed data transmission and exchange,
pre-verification and post-application of data processing is possible. This
product is very suitable for students, engineers and other groups engaged in
MPSoCs development.

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
6 / 66
www.alinx.com

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
7 / 66
www.alinx.com
Part 1: FPGA Development Board Introduction
The entire structure of the AXU5EV-P FPGA development board is
inherited from our consistent core board + carrier board model. A high-speed
inter-board connector is used between the core board and the carrier board.
The core board is mainly composed of the smallest system of ACU5EV +
5 DDR4 + eMMC + QSPI FLASH, ACU5EV uses Xilinx's Zynq UltraScale+
MPSoCs EV chip, the model number is XCZU5EV-2SFVC784I. ZU5EV chip
can be divided into processor system part Processor System (PS) and
programmable logic part Programmable Logic (PL). On the PS side and PL
side of the ZU5EV chip, there are 4 DDR4 and 1 DDR4 respectively, each with
a capacity of up to 1GB, which enables the ARM system and FPGA system to
independently process and store data. The 8GB eMMC FLASH memory chip
and a 256Mb QSPI FLASH which are on the PS side, used to statically store
the operating system, file system and user data of MPSoCs.
The AXU5EV-E carrier board expands its rich peripheral interface,
including 1 M.2 interface, 1 DP interface, 4 USB 3.0 Interface, 2 Gigabit
Ethernet interfaces, 1 PCIE X 2 Interface, 2 SFP Interfaces, 2 UART Interfaces,
1 SD card slot,1 HDMI Input Interface, 1 HDMI Output Interface,1 FMC
Interface, 2-Channel CAN bus interfaces, 2-Channel RS485 bus interfaces, 1
MIPI Camera Interface and some keys and LEDs.
The following figure shows the structure of the entire development system:

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
8 / 66
www.alinx.com
Figure 1-1-1: The Schematic Diagram of the AXU5EV-P
Through this diagram, you can see the interfaces and functions that the
AXU5EV-P FPGA Development Board contains:
ACU5EV core board
It consists of ZU5EV +4GB DDR4（PS）+1GB DDR4（PL）+8GB eMMC
FLASH + 256Mb QSPI FLASH, and there are 2 crystal oscillators to
provide the clock, a single-ended 33.3333MHz crystal oscillator for the
PS system, and a differential 200MHz crystal oscillator for the PL logic
DDR reference clock.
M.2 Interface
1 PCIEx1 standard M.2 interface, used to connect M.2 SSD solid state
drives, with a communication speed of up to 6Gbps.
DP Output Interface
1 standard Display Port output display interface, used for video image

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
9 / 66
www.alinx.com
display. Supports up to 4K@30Hz or 1080P@60Hz output
USB 3.0 Interface
4-channel USB3.0 HOST interface, USB interface type is TYPE A. Used
to connect external USB peripherals, such as connecting a mouse,
keyboard, U disk, etc.
Gigabit Ethernet Interface
2-Channel 10/100M/1000M Ethernet RJ45 interface for Ethernet data
exchange with computers or other network devices. The network
interface chip uses Micrel's KSZ9031 industrial grade GPHY chip.
USB Uart Interface
2-Channel Uart to USB interfaces for communication with the computer,
for user debugging. The serial port chip adopts the USB-UAR chip of
Silicon Labs CP2102GM, and the USB interface adopts the MINI USB
interface.
PCIe x 2 Interface
It supports the PCI Express 3.0 standard (compatible with 2.0), provides
a standard PCIe x2 high-speed data transmission interface, and the
single-channel communication rate can be as high as 8GBaud.
2-Channel SFP Fiber Interface
The two high-speed transceivers of the GTH transceiver are connected
to the transmitting and receiving of two optical modules, realizing two
high-speed optical fiber communication interfaces. The transmitting and
sending speed of each optical fiber data communication is as high as
12.5Gb/s.
SD Card Slot Interface
1 Micro SD card holder, used to store operating system image and file
system.
HDMI Output Interface
1 HDMI video output interface, using ADV7511 HDMI encoding chip

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
10 / 66
www.alinx.com
from ANALOG DEVICE, supports up to 1080P@60Hz output and 3D
output.
HDMI Input Interface
1 HDMI video input interface, using ADV7611 HDMI decoding chip from
ANALOG DEVICE, supports up to 1080P@60Hz input and supports
data input in different formats.
FMC Expansion Interface
1 standard FMC LPC expansion port, which can be connected to
various FMC modules of XILINX or ALINX (HDMI input and output
modules, binocular camera modules, high-speed AD modules, etc.).
CAN Communication Interface
Two-way CAN bus interface, using TI's SN65HVD232 chip, the
interface uses 4Pin green terminal blocks.
485 Communication Interface
Two-way 485 communication interface, using MAX3485 chip of MAXIM
company. The interface uses 6Pin green terminal blocks.
MIPI Interface
MIPI camera input interfaces, used to connect MIPI camera module
(AN5641).
JTAG debug port
A 10-pin 0.1 spacing standard JTAG ports for FPGA program download
and debugging. Users can debug and download the ZU4EV system
through the XILINX downloader.
Temperature and humidity sensor chip LM75
On-board temperature and humidity sensor chip LM75, used to detect
the temperature and humidity of the surrounding environment around
the FPGA development board
EEPROM
One EEPROM 24LC04 with I2C interface

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
11 / 66
www.alinx.com
Real Time Clock (RTC)
1 built-in RTC real-time clock
LED Lights
5 LEDs, include 2 LEDs on the core board, 3 LED on the carrier board.
There are 1 power indicator and 1 DONE Configuration indicator on the
core board, 1 power indicator on the carrier board. There are 1 power
indicator and 2 user indicators on the carrier board.
KEYs
3 KEYs, include 1 Rest KEY and 2 User KEYs.

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
12 / 66
www.alinx.com
Part 2: ACU5EV core board
Part 2.1: ACU5EV core board Introduction
ACU5EV (core board model, the same below) FPGA core board, ZYNQ
chip is based on XCZU5EV-2SFVC784I of XILINX company Zynq UltraScale+
MPSoCs EV Family.
This core board uses 5 Micron DDR4 chips MT40A512M16GE, of which 4
DDR4 chips are mounted on the PS side to form a 64-bit data bus bandwidth
and 4GB capacity. One DDR4 chip is mounted on the PL end, which is a 16-bit
data bus width and a capacity of 1GB. The highest operating speed of DDR4
SDRAM on the PS side can reach 1200MHz (data rate 2400Mbps), and the
highest operating speed of DDR4 SDRAM on the PL side can reach 1066MHz
(data rate 2132Mbps). In addition, a 256MBit QSPI FLASH and an 8GB eMMC
FLASH chip are also integrated on the core board to start storage configuration
and system files.
In order to connect with the carrier board, the four board-to-board
connectors of this core board expand the PS side USB2.0 interface, Gigabit
Ethernet interface, SD card interface and other remaining MIO ports; also
expand 4 pairs of PS MGT high-speed transceiver interface; and almost all IO
ports on the PL side (HP I/O: 96, HD I/O: 84). The wiring between the
XCZU5EV chip and the interface has been processed with equal length and
differential, and the core board size is only 3.15*2.36 (inch), which is very
suitable for secondary development.

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
13 / 66
www.alinx.com
Figure 2-1-1: ACU5EV Core Board (Front View)
Part 2.2: ZYNQ Chip
The FPGA core board ACU5EV uses Xilinx's Zynq UltraScale+ MPSoCs
EV family chip, module XCZU5EV-2SFVC784I. The PS system of the ZU5EV
chip integrates 4 ARM Cortex™-A53 processors with a speed of up to 1.2Ghz
and supports Level 2 Cache; it also contains 2 Cortex-R5 processors with a
speed of up to 500Mhz
The ZU5EV chip supports 32-bit or 64-bit DDR4, LPDDR4, DDR3, DDR3L,
LPDDR3 memory chips, with rich high-speed interfaces on the PS side such as
PCIE Gen2, USB3.0, SATA 3.1, DisplayPort; it also supports USB2.0 , Gigabit
Ethernet, SD/SDIO, I2C, CAN, UART, GPIO and other interfaces. The PL end
contains a wealth of programmable logic units, DSP and internal RAM. .
Figure 2-2-1 detailed the Overall Block Diagram of the ZU5EV Chip.

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
14 / 66
www.alinx.com
Figure 2-2-1: Overall Block Diagram of the ZYNQ ZU5EV Chip
The main parameters of the PS system part are as follows:
ARM quad-core Cortex ™-A53 processor, speed up to 1.5GHz, each
CPU 32KB level 1 instruction and data cache, 1MB level 2 cache,
shared by 2 CPUs
ARM dual-core Cortex-R5 processor, speed up to 600MHz, each CPU
32KB level 1 instruction and data cache, and 128K tightly coupled
memory.
Image Video Processor Mali-400 MP2, speed up to 677MHz, 64KB level
2 cache
External storage interface, support 32/64bit DDR4/3/3L, LPDDR4/3
interface
Static storage interface, support NAND, 2xQuad-SPI FLASH.
High-speed connection interface, support PCIe Gen2 x 4, 2 x USB3.0,

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
15 / 66
www.alinx.com
Sata 3.1, Display Port, 4 x Tri-mode Gigabit Ethernet
Common connection interfaces: 2 x USB2.0, 2 x SD/SDIO, 2 x UART,
2 x CAN 2.0B, 2 x I2C, 2 x SPI, 4 x 32b GPIO
Power management: Support the four-part division of power supply
Full/ Low/ PL/ Battery
Encryption algorithm: support RSA, AES and SHA.
System monitoring: 10-bit 1Mbps AD sampling for temperature and
voltage detection.
The main parameters of the PL logic part are as follows:
System Logic Cells: 256.2K
CLB Flip-flops: 234.24K
Look-up-tables (LUTs): 117.12K
 Block RAM : 5.1 Mb
Clock Management Units (CMTs): 4
 DSP Slices: 1248
Video Codec Unit (VCU): 1
 PCIE3.0: 2
GTH 12.5Gb/s Transceiver: 4
XCZU5EV-2SFVC784I chip speed grade is -2, industrial grade, package is
SFVC784
Part 2.3: DDR4 DRAM
The ACU5EV core board is equipped with 5 Micron (Micron) 1GB DDR4
chips, model MT40A512M16LY-062E, of which 4 DDR4 chips are mounted on
the PS side to form a 64-bit data bus bandwidth and 4GB capacity. One DDR4
chip is mounted on the PL end, which is a 16-bit data bus width and a capacity

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
16 / 66
www.alinx.com
of 1GB. The maximum operating speed of the DDR4 SDRAM on the PS side
can reach 1200MHz (data rate 2400Mbps), and the 4 DDR4 storage systems
are directly connected to the memory interface of the PS BANK504. The
highest operating speed of the DDR4 SDRAM on the PL side can reach
1066MHz (data rate 2133Mbps), and a piece of DDR4 is connected to the
BANK64 interface of the FPGA. The specific configuration of DDR4 SDRAM is
shown in Table 2-3-1 below:
Bit Number
Chip Model
Capacity
Factory
U12,U14,U15,U16
MT40A512M16LY-062E
512M x 16bit
Micron
Table 2-3-1: DDR4 SDRAM Configuration
The hardware design of DDR4 requires strict consideration of signal
integrity. We have fully considered the matching resistor/terminal resistance,
trace impedance control, and trace length control in circuit design and PCB
design to ensure high-speed and stable operation of DDR4.
The hardware connection of DDR4 SDRAM on the PS Side is shown in
Figure 2-3-1:
Figure 2-3-1: PS DDR4 DRAM schematic diagram

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
17 / 66
www.alinx.com
The hardware connection of DDR4 SDRAM on the PL Side is shown in
Figure 2-3-2:
Figure 2-3-2: PL DDR4 DRAM schematic diagram
PS Side DDR4 SDRAM pin assignment:
Signal Name
Pin Name
Pin Number
PS_DDR4_DQS0_P
PS_DDR_DQS_P0_504
AF21
PS_DDR4_DQS0_N
PS_DDR_DQS_N0_504
AG21
PS_DDR4_DQS1_P
PS_DDR_DQS_P1_504
AF23
PS_DDR4_DQS1_N
PS_DDR_DQS_N1_504
AG23
PS_DDR4_DQS2_P
PS_DDR_DQS_P2_504
AF25
PS_DDR4_DQS2_N
PS_DDR_DQS_N2_504
AF26
PS_DDR4_DQS3_P
PS_DDR_DQS_P3_504
AE27
PS_DDR4_DQS3_N
PS_DDR_DQS_N3_504
AF27
PS_DDR4_DQS4_P
PS_DDR_DQS_P4_504
N23
PS_DDR4_DQS4_N
PS_DDR_DQS_N4_504
M23
PS_DDR4_DQS5_P
PS_DDR_DQS_P5_504
L23
PS_DDR4_DQS5_N
PS_DDR_DQS_N5_504
K23
PS_DDR4_DQS6_P
PS_DDR_DQS_P6_504
N26
PS_DDR4_DQS6_N
PS_DDR_DQS_N6_504
N27

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
18 / 66
www.alinx.com
PS_DDR4_DQS7_P
PS_DDR_DQS_P7_504
J26
PS_DDR4_DQS7_N
PS_DDR_DQS_N7_504
J27
PS_DDR4_DQ0
PS_DDR_DQ0_504
AD21
PS_DDR4_DQ1
PS_DDR_DQ1_504
AE20
PS_DDR4_DQ2
PS_DDR_DQ2_504
AD20
PS_DDR4_DQ3
PS_DDR_DQ3_504
AF20
PS_DDR4_DQ4
PS_DDR_DQ4_504
AH21
PS_DDR4_DQ5
PS_DDR_DQ5_504
AH20
PS_DDR4_DQ6
PS_DDR_DQ6_504
AH19
PS_DDR4_DQ7
PS_DDR_DQ7_504
AG19
PS_DDR4_DQ8
PS_DDR_DQ8_504
AF22
PS_DDR4_DQ9
PS_DDR_DQ9_504
AH22
PS_DDR4_DQ10
PS_DDR_DQ10_504
AE22
PS_DDR4_DQ11
PS_DDR_DQ11_504
AD22
PS_DDR4_DQ12
PS_DDR_DQ12_504
AH23
PS_DDR4_DQ13
PS_DDR_DQ13_504
AH24
PS_DDR4_DQ14
PS_DDR_DQ14_504
AE24
PS_DDR4_DQ15
PS_DDR_DQ15_504
AG24
PS_DDR4_DQ16
PS_DDR_DQ16_504
AC26
PS_DDR4_DQ17
PS_DDR_DQ17_504
AD26
PS_DDR4_DQ18
PS_DDR_DQ18_504
AD25
PS_DDR4_DQ19
PS_DDR_DQ19_504
AD24
PS_DDR4_DQ20
PS_DDR_DQ20_504
AG26
PS_DDR4_DQ21
PS_DDR_DQ21_504
AH25
PS_DDR4_DQ22
PS_DDR_DQ22_504
AH26
PS_DDR4_DQ23
PS_DDR_DQ23_504
AG25
PS_DDR4_DQ24
PS_DDR_DQ24_504
AH27
PS_DDR4_DQ25
PS_DDR_DQ25_504
AH28
PS_DDR4_DQ26
PS_DDR_DQ26_504
AF28
PS_DDR4_DQ27
PS_DDR_DQ27_504
AG28
PS_DDR4_DQ28
PS_DDR_DQ28_504
AC27
PS_DDR4_DQ29
PS_DDR_DQ29_504
AD27
PS_DDR4_DQ30
PS_DDR_DQ30_504
AD28
PS_DDR4_DQ31
PS_DDR_DQ31_504
AC28

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
19 / 66
www.alinx.com
PS_DDR4_DQ32
PS_DDR_DQ32_504
T22
PS_DDR4_DQ33
PS_DDR_DQ33_504
R22
PS_DDR4_DQ34
PS_DDR_DQ34_504
P22
PS_DDR4_DQ35
PS_DDR_DQ35_504
N22
PS_DDR4_DQ36
PS_DDR_DQ36_504
T23
PS_DDR4_DQ37
PS_DDR_DQ37_504
P24
PS_DDR4_DQ38
PS_DDR_DQ38_504
R24
PS_DDR4_DQ39
PS_DDR_DQ39_504
N24
PS_DDR4_DQ40
PS_DDR_DQ40_504
H24
PS_DDR4_DQ41
PS_DDR_DQ41_504
J24
PS_DDR4_DQ42
PS_DDR_DQ42_504
M24
PS_DDR4_DQ43
PS_DDR_DQ43_504
K24
PS_DDR4_DQ44
PS_DDR_DQ44_504
J22
PS_DDR4_DQ45
PS_DDR_DQ45_504
H22
PS_DDR4_DQ46
PS_DDR_DQ46_504
K22
PS_DDR4_DQ47
PS_DDR_DQ47_504
L22
PS_DDR4_DQ48
PS_DDR_DQ48_504
M25
PS_DDR4_DQ49
PS_DDR_DQ49_504
M26
PS_DDR4_DQ50
PS_DDR_DQ50_504
L25
PS_DDR4_DQ51
PS_DDR_DQ51_504
L26
PS_DDR4_DQ52
PS_DDR_DQ52_504
K28
PS_DDR4_DQ53
PS_DDR_DQ53_504
L28
PS_DDR4_DQ54
PS_DDR_DQ54_504
M28
PS_DDR4_DQ55
PS_DDR_DQ55_504
N28
PS_DDR4_DQ56
PS_DDR_DQ56_504
J28
PS_DDR4_DQ57
PS_DDR_DQ57_504
K27
PS_DDR4_DQ58
PS_DDR_DQ58_504
H28
PS_DDR4_DQ59
PS_DDR_DQ59_504
H27
PS_DDR4_DQ60
PS_DDR_DQ60_504
G26
PS_DDR4_DQ61
PS_DDR_DQ61_504
G25
PS_DDR4_DQ62
PS_DDR_DQ62_504
K25
PS_DDR4_DQ63
PS_DDR_DQ63_504
J25
PS_DDR4_DM0
PS_DDR_DM0_504
AG20
PS_DDR4_DM1
PS_DDR_DM1_504
AE23

ZYNQ Ultrascale + FPGA Board AXU5EV-P User Manual
20 / 66
www.alinx.com
PS_DDR4_DM2
PS_DDR_DM2_504
AE25
PS_DDR4_DM3
PS_DDR_DM3_504
AE28
PS_DDR4_DM4
PS_DDR_DM4_504
R23
PS_DDR4_DM5
PS_DDR_DM5_504
H23
PS_DDR4_DM6
PS_DDR_DM6_504
L27
PS_DDR4_DM7
PS_DDR_DM7_504
H26
PS_DDR4_A0
PS_DDR_A0_504
W28
PS_DDR4_A1
PS_DDR_A1_504
Y28
PS_DDR4_A2
PS_DDR_A2_504
AB28
PS_DDR4_A3
PS_DDR_A3_504
AA28
PS_DDR4_A4
PS_DDR_A4_504
Y27
PS_DDR4_A5
PS_DDR_A5_504
AA27
PS_DDR4_A6
PS_DDR_A6_504
Y22
PS_DDR4_A7
PS_DDR_A7_504
AA23
PS_DDR4_A8
PS_DDR_A8_504
AA22
PS_DDR4_A9
PS_DDR_A9_504
AB23
PS_DDR4_A10
PS_DDR_A10_504
AA25
PS_DDR4_A11
PS_DDR_A11_504
AA26
PS_DDR4_A12
PS_DDR_A12_504
AB25
PS_DDR4_A13
PS_DDR_A13_504
AB26
PS_DDR4_WE_B
PS_DDR_A14_504
AB24
PS_DDR4_CAS_B
PS_DDR_A15_504
AC24
PS_DDR4_RAS_B
PS_DDR_A16_504
AC23
PS_DDR4_ACT_B
PS_DDR_ACT_N_504
Y23
PS_DDR4_ALERT_B
PS_DDR_ALERT_N_504
U25
PS_DDR4_BA0
PS_DDR_BA0_504
V23
PS_DDR4_BA1
PS_DDR_BA1_504
W22
PS_DDR4_BG0
PS_DDR_BG0_504
W24
PS_DDR4_CS0_B
PS_DDR_CS_N0_504
W27
PS_DDR4_ODT0
PS_DDR_ODT0_504
U28
PS_DDR4_PARITY
PS_DDR_PARITY_504
V24
PS_DDR4_RESET_B
PS_DDR_RST_N_504
U23
PS_DDR4_CLK0_P
PS_DDR_CK0_P_504
W25
PS_DDR4_CLK0_N
PS_DDR_CK0_N_504
W26