Amana AP125D User manual

ROOM AIR CONDITIONING AND DEHUMIDIFIER PRODUCTS
PORTABLE AIR CONDITIONER
CLIMATISEUR PORTATIF
ACONDICIONADOR DE AIRE PORTATIL
Model
Modèle
Modelo
AP125D
AP125HD

(1)
English
SAFETY PRECAUTIONS
Following these basic precautions will reduce the risk of fire, electrical shock,
injury or death when using your air conditioner.
1) Air conditioner must be connected to proper electrical outlet with the correct electrical
supply. (see table)
2) Proper grounding must be ensured to reduce the risk of shock and fire. DO NOT CUT OR
REMOVE THE GROUNDING PRONG. If you do not have a three-prong electric receptacle
outlet in the wall, have a certified electrician install the proper receptacle. The wall receptacle
MUST be properly grounded.
3) Do not operate air conditioner if power cord is frayed or otherwise damaged. Also avoid using
it if there are cracks or abrasion damage along the length or plug connector, or if the unit
malfunctions or is damaged in any manner. Contact an authorized service location for
examination, repairs or adjustments.
4) DO NOT USE AN ADAPTER OR AN EXTENSION CORD.
5) Do not block airflow around the air conditioner. Also the exhaust hose should be free of any
obstructions.
6) Always unplug the air conditioner before servicing it or moving it.
7) Do not install or use the air conditioner in any area where the atmosphere contains combus-
tible gases or where the atmosphere is oily or sulphurous. Avoid any chemicals coming in
contact with your air conditioner.
8) Do not place any object on the top of the unit.
9) Never operate the air conditioner without the filters in place.
10) Do not use the air conditioners near a bathtub, shower or wash basin.
Note: This unit meets the National Electric Code (NEC), article/section 440.65, which mandates the
use of Leakage Current Detection and Interruption (LCDI).

(2)
English
A Word From Amana
Product Registration
TABLE
RECEPTACLE AND FUSE TYPES
RATED VOLTS
AMPS
WALL OUTLET
FUSE SIZE
TIME DELAY FUSE
(or circuit braker)
125/60 250/60
15 20 15 20 30
15 20 15 20 30
Plug Plug
Plug
Thank you for buying a dependable, energy-saving and easy-to-operate AMANA air
conditioner. This manual contains useful information for you to maintain, operate, install and
safely use your air conditioner. Your air conditioner cleans, cools and dehumidifies the air in
your room to provide you with the ultimate level of comfort.
Please read instructions carefully before using the product. Also, do not forget to fill out and
mail the Product Registration Card.
Record Your Model and Serial Number.
For all your service calls during the warranty period the following information will be needed.
Attach the sales receipt to this guide and keep for future reference. (This information can be
obtained from the serial plate, which is on your air conditioner.)
Model Number:...................................................................................................................
Serial Number:....................................................................................................................
Date of Purchase:................................................................................................................
Dealer’s Name:...................................................................................................................
Dealers Address: .................................................................................................................
Dealers Phone Number:.......................................................................................................

Table Of Contents
PAGE
Safety Precautions ..................................................................................................................... 1
A Word From Amana................................................................................................................. 2
Product Registration................................................................................................................... 2
Advantages ...............................................................................................................................4
Parts and Features..................................................................................................................... 5
Assembly and Installation..........................................................................................................6
Operation..................................................................................................................................9
Product Specification ...............................................................................................................12
Care and Cleaning..................................................................................................................12
Storage....................................................................................................................................12
Troubleshooting.......................................................................................................................13
Warranty Information .............................................................................................................. 14
(3)
English

Advantages of this Model
1. Unique dual-hose design, providing more powerful and faster cooling than the single-hose
design.
2. Adjustable airflow direction for convenient and effective cooling.
3. Heat and cool functions for Model AP125HD only.
4. This model is easy to operate. The electronic control panel has a timer, thermostat, three
cooling speeds, three fan speeds and a dehumidification function (dry).
5. This portable air conditioner does not require water to be added.
6. The unit has a unique design which evaporates the water. Therefore no condensation tank
is necessary, thus avoiding having to wake up in the middle of the night to empty the
bucket and turn on the unit.
7. An easy-to-install window kit is included which consists of the exhaust hose, 2 hose nozzle,
the window panel kit, exhaust hose connector and cover for the exhaust hose connector.
8. Full-directional casters are included to help to move the unit to be conveniently used in
almost any area.
9. The filter screen is designed to be easily accessible.
10. Portable air conditioners are easy to store when not in use.
(4)
English

Parts and Features
(5)
English
1. Control Panel
2. Cold Air Outlet
3. Signal Receptor
4. Transport Handle
5. Air Outlet Hose
6. Evaporator Air Intake
7. Air Intake Hose
8. Drain Port
9. Power Supply
Fig. 1

(6)
English
Assembly and Installation
IN DOOR
Assembly Instruction
A. Connect exhaust hose to the back of the unit. Extend hose to desired
length and connect with window kit.
USING EXHAUST DUCT SET
1. Insert ends of Exhaust hose into air outlet nozzle and Exhaust
duct “A” by twisting until it stops.
2. Fix the Exhaust duct “A” to the exhaust outlet on the rear of
the unit. This is achieved by sliding the appropriate connector
downward over the exhaust outlet, ensuring that the lugs on
the outlet are engaged with the grooves on the connector.
3. The exhaust hose is snap-fit to the unit. To take it off, turn it
clockwise and remove.
Note: Air outlet hose should be mounted at right side
(see fig. 1)
4. Extend the Exhaust hose and close the Window as far as
possible, trapping the air outlet nozzle.
B. Repeat same steps for the air intake hose.
USING WINDOW PANEL KIT
1. Air Inlet Hose - 1 set
2. Air Outlet Hose - 1 set
3. Window Exhaust Adapter - 2 pieces
4. Window/Patio Door Slider Kit - 1 set
1
2
3
4
Fig. 2
Window Kit Installation

(7)
English
Your window kit has been designed to fit most standard vertical and horizontal window applications.
However, it may be necessary for you to improvise/modify some aspects of the installation procedures
for certain type windows. Please refer to for minimum and maximum window openings.
Installation Instruction
• Air outlet intake on the indoor side should not be blocked by curtains or similar objects.
• The end of the air hose cannot be blocked by shutters or other similar objects.
• Do not bend the air hose when assembling: keep it straight.
• When appliance in cool or dry mode, condensation may concentrate in water box or chassis.
When the box is full, water full indicator lights up (red), and the LCD window shows the error
sign E. The appliance will stop running at the same time. Unplug the unit from the outlet, then pull
out the rubber plug in drain port located on the bottom of the appliance, drain the water into
a prepared container, or drain the water by moving the appliance to a suitable place.
Note: Water should be drained out when the water full light is on. Otherwise, the appliance
will not work.
• Select the best location for your air conditioner. It must be beside a window, door to the outside,
or French window.
• Keep the required distance from the return air outlet to the wall or other obstacles at least 20”.
• Attach one end of each hose to the unit. They will snap in. Connect the other end of each hose to
the window kit that comes with the unit.
• Air outlet or intake cannot be blocked by protective grid or similar object.
• The distance between two ends of the air hose should be kept at 8” at least.
Note: It is not recommended to use only one hose. This will greatly reduce the cooling
capacity of the unit.
Fig. 3

(8)
English
Installation Sequence
Before Starting this Unit
1. Select a suitable location, making sure you have easy access to an electrical outlet.
2. Install the flexible exhaust hose and adjustable window slider kit as depicted in Fig. 2 & 3.
Note: 1. Step 2 is required only while using cooling or dry mode. In cooling mode you can
select to install two hoses or air outlet hose only. In dry mode you may install air
outlet hose only.
2. While running or installing, the hoses should not be blocked by curtains or other
objects.
3. Plug the appliance into a grounded electrical outlet. Please select an appropriate power supply
based the nameplate information on the unit.
Note: Do not use a regular extension cord.
4. To turn the appliance on, press ON/OFF button.

(9)
English
Operation
Note: Wait for 24 hours to turn on air conditioner if the unit has been tilted for any
reason. This is for the oils and the coolants to settle and level off.
1. Wait for 3 minutes before restarting the unit after a normal shutdown to complete the
compressor cycle.
2. Use an 115v 15 amp outlet for the air conditioner. Do not use any other electrical appliances
on this outlet or you may trip the fuse. Use a dedicated outlet for this air conditioner.
3. Do not place the air conditioner in direct sunlight or close to any heating appliances.
(ex. baseboard heaters, stoves, etc.)
4. Operate on a flat surface only.
5. Keep the unit free of any obstructions such as drapes, curtains, blinds, etc.
6. Keep unit at least 1 foot away from the wall.
7. Check and clean the filter once every week to get the highest efficiency.
Note: Do not use unit without filter.
8. If the unit is not being used for a long period of time, remove the plug from the water drain
pipe and drain out any condensed water.
When turning on the unit first time after plugging it into an electrical outlet the unit will start in a
low fan cool mode. The temperature reading on the LED will be the room temperature. When
turning on the unit in regular usage it will remember the last setting prior to shut-off.

English
(10)
Control Panel
Power Control
The power control turns the unit on and off.
Light
Unit will not operate if this light is lit. Drain water
by removing plug from the bottom back of the
unit. (See page 7 for details.)
Mode Control
The mode control has 3 settings:
• Cool • Dehumidifier
• Heating/Fan (Model AP125HD Only)
The settings are adjusted with Mode Control
button. A green light will indicate which setting
is currently being used.
Cooling Mode
• During the cooling mode the air is cooled
and hot air is vented to the outside through
the exhaust tube.
• Adjust fan speed and temperature to suit
your desired comfort level.
Dehumidifier Mode
• Air is dehumidified as it passes through the
air conditioner, without being in full cooling
mode. (Note: The warm air exhaust hose
must vent inside the room, not outside as it
does when cooling. If the unit is vented
outside some cooling will occur.)
Heating Mode - Model AP125HD Only
(LED in Red)
• In heating mode, the air flow is selectable.
(Note: Heating is activated only when the
ambient temperature is below 77˚ F.)
Fan Mode (LED in Yellow)
• Air is circulated throughout the room with
no cooling. (Note: Unit does not need to be
vented in Fan mode.)
Fan Speed
The Fan Speed Control has three settings: High,
Medium or Low. In the Dehumidifier or Dry
Mode, the fan will only operate at low speed.

TIMER PROGRAMMING
1. Press the ( ) button on the remote or the “Timer Setting” button on the control panel to turn on
the Timer Function.
2. Press the ( ) or ( ) buttons on the remote or the ( ) or ( ) buttons on the control panel to set
the desired shut-off period.
3. The unit will shut off when the set time elapses.
DEHUMIDIFICATION OPERATION
Press the ( ) button on the remote or the “MODE” button on the control panel to sleect the
dehumidifier mode. When the dehumidifier mode is on, the temperature buttons and the fan speed
buttons do not function and the fan will operate on low speed. The dehumidifier indicator light
will illuminate and stay solid while the unit is dehumidifying, and the dehumidifier light will blink.
Remember, the exhaust hose does not need to be used in dehumidifier mode.
English
(11)
Timer
Auto turn off:
With machine in fan mode, press timer button to
select number of hours you would like the unit to
run in air conditioning mode until it automatically
shuts off.
Auto turn on:
With machine powered off, press timer button
to select number of hours until you would like the
unit to automatically start running in air
conditioning mode.
Timer / Temperature Buttons
• Used for adjusting the timer and thermostat.
• The default display is room temperature.
• When “ “ or “ “ button is pressed, the
set temperature is displayed and may be
adjusted. After 15 seconds the display will
revert back to room temperature.
• The temperature can be raised or lowered in
the cool and dehumidifier or dry mode. The
temperature cannot be adjusted in the
fan mode.
Remote Control
a) LCD Screen
b) Power On/Off Button
c) Timer and Thermostat Setting Buttons
d) Mode Button (Select A/C, Fan or Dehumidifier)
e) A/C Fan Speed Button (High, Medium, or Low)
f) Timer On/Off Button
g) Fahrenheit/Celsius Selector

(12)
English
Product Specification
Voltage and Frequency 115V / 60Hz
Input Power (cooling/heating-Model AP125HD Only) 1,250 / 1,450 W
Cooling Capacity 12,000 BTU
Heating Capacity 6,200 BTU
Moisture Removal (pints/day) 85.0
Refrigerant R-22/19.1oz.
Timer 12 Hours
Operating Temperature Range 61˚F - 100˚F
Unit Dimensions (WxDxH) 19 11/16" x 15 3/4" x 33 1/4"
Net Weight approximate 80 lbs.
Power Cord 6 Feet
Exhaust Hose 5 Feet
Air Conditioner Remote Control
The functions work the same as your air conditioner’s touch controls.
Batteries: Remove the cover on the back of the remote controller and insert the batteries with the
(+) and (-) poles pointing in the proper direction.
CAUTION
Use only AAA or IEC R03 1.5V batteries.
Remove the batteries if the remote controller is not used for a month or longer.
Do not attempt to recharge the supplied batteries.
All batteries should be replaced at the same time.
Do not dispose of the batteries in a fire as they may explode.
Do not mix old batteries with new batteries.

If air conditioner does not operate:
• Check if unit is plugged in. The plug may have come loose.
• Check if the electrical wall receptacle is of proper voltage.
• Check if the circuit breaker needs to be reset or if the fuse needs to be replaced.
• Check if the unit is in “Off” mode.
• The tank full warning light is on. Call for service.
Air conditioner working but room not cooling:
• Room may have appliances that produce heat. Use an exhaust fan to remove excess heat.
• Check exhaust hose for proper installation.
• Redirect the airflow. Remove any obstacles.
• All doors and windows need to be closed so cool air does
not escape the room.
• Air filter may be blocked or may need cleaning.
• Unit BTU may be too low for the required cooling area.
• On extremely hot & humid days air conditioners may take a little longer to cool.
• Unit may be in fan or dry mode. Put air conditioner in cool mode.
(13)
• Always unplug your air conditioner before cleaning.
• Air filter needs to be cleaned at least once a week for your unit to operate at
optimum efficiency. The filter can be slid out from the back by pulling on the tab.
The filter may be washed or vacuumed. Remove the excess water from the filter by
gently shaking the filter. This will remove dust and particles trapped in the filter.
After cleaning, reinstall the filter. DO NOT use your air conditioner without the air
filter in place.
• To clean the cabinet DO NOT use harsh chemicals, abrasives, ammonia, chlorine,
bleach, concentrated detergents, solvents or metal scouring pads. Some of these
chemicals may dissolve, damage and/or discolor your air conditioner.
• Always use a soft cloth dampened with water or mild soap and water solution to
wipe the front of the cabinet. Wipe dry with a soft cloth.
• To store your air conditioner when not being used for a long period of time, drain
condensed water using the drain pipe. Remove exhaust hose, clean filters, cover with
plastic bag and store away.
English
Care and Cleaning Guide
Storage
Troubleshooting

(14)
English
This warranty covers all defects in workmanship or
material for:
1. The mechanical and electrical parts (including labor
costs) contained in this Amana product, for a
period of 12 months from the date of purchase.
(For commercial or rental application the warranty
is 90 days.)
2. The sealed system and compressor contained in this
Amana product is for a period of 5 years, from the
date of purchase (excluding labor costs after the
initial 12 month period). In commercial or rental
use, the additional limited compressor warranty
is for 1 year and 9 months (excluding labor costs
after the initial 90 days period).
You must keep and be able to provide your
original sales receipt as proof of the date of
purchase.
Who is covered?
The original retail purchaser of this Amana product.
What will be done?
Amana will repair or replace any mechanical,
electrical part or the compressor, which proves
defective in normal household use for a period of
12 months. Amana will repair or replace (excluding
labor costs) the sealed system and compressor (parts
only) for an additional 4 year period.
How can you get service?
1. Contact your nearest manufacturer authorized
Service Depot. For the name of the Service Depot
nearest you, contact Amana Room Air Conditioners
at 1-888-842-2440
2. All service must be performed by a manufacturer
authorized Amana Service Depot.
THIS WARRANTY COVERS UNITS WITHIN THE
COMTINENTAL UNITED STATES, CANADA AND
PUERTO RICO.
THIS WARRANTY DOES NOT COVER:
Damages from improper installation.
Damages in shipping.
Damages from misuse, abuse, accident, alteration,
lack of proper care and maintenance.
Damages from service by other than an authorized
dealer or service center.
Labor, service, transportation and shipping charges for
the removal of defective parts and installation of
replacement parts beyond the initial 12-month period.
THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE WARRANTIES OF MERCHANTIBILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
The remedy provided in this warranty is exclusive and
is granted in lieu of all other remedies. This warranty
does not cover incidental or consequential damages.
Some states do not allow the exclusion of incidental or
consequential damages, so this limitation may not
apply to you. Some states do not allow limitations on
how long an implied warranty lasts, so this limitation
may not apply to you. This warranty gives you specific
legal rights and you may also have other rights, which
vary from state to state.
ROOM AIR CONDITIONING AND DEHUMIDIFIER PRODUCTS
Limited Warranty
For more information on this Amana product,
call Customer Affairs Department at:
1-888-842-2440
Amana Room Air Conditioners

Un mot de Amana
Registration du Produit
Merci d’avoir achete un climatiseur “Amana”qui est dependable, facile a operer et economise
de l’energie. Ce manuel contient l’information necessaire pour maintenir, operer,installer et
utiliser proprement votre climatiseur. Votre climatiseur nettoie, refroidit et dehumidifie l’air
dans votre salle pour vous fournir avec le niveau ultime de confort.
S’il vous plait lisez soigneusement les instructions avant d’installer ce produit. N’oubliez pas de
remplir et poster la carte d’enregistrement du produit.
Registrez le model et numero de serie.
Pour tous vos appels de service pendant la periode de votre garantie, les informations
suivantes vous seront necessaries. Attachez le recu de ventes a ce guide et garder pour la
reference d’avenir. Cette information peut etre obtenue de la plaque en serie, qui est sur
votre climatiseur.
Numero du model:..............................................................................................................
Numero de serie: ................................................................................................................
Date d’achats:.....................................................................................................................
Nom du negociant: .............................................................................................................
Addressed u negociant: .......................................................................................................
Numeros de telephone du negociant:...................................................................................
TABLEAU
TYPES DE PRISES ET FUSIBLES
TENSION
AMPÈRES
PRISE DE COURANT
MURALE
TAILLE DU FUSIBLE
FUSIBLE À FUSION TEMPORISÉE
(disjoncteur)
125/60 250/60
15 20 15 20 30
15 20 15 20 30
Fiche Fiche
Fiche
Français
(1)

CONSIGNES DE SÉCURITÉ
AVERTISSEMENT: Veuillez suivre ces précautions de base lorsque vous
utilisez l'appareil afin de réduire tout risque d'incendie,
d'électrocution, de blessure, voire de mort.
1) Le climatiseur doit être branché au niveau d'une prise électrique d'une tension adéquate.
(voir tableau)
2) L'appareil doit être mis à la terre (masse) afin de réduire tout risque d'électrocution et
d'incendie. NE PAS COUPER NI RETIRER LA BROCHE DE MASSE. Si votre prise murale ne peut
accueillir une fiche à trois broches, veuillez faire en sorte qu'un électricien qualifié en installe
une. La prise murale DOIT être mise à la masse.
3) Ne pas utiliser l'appareil si le cordon d'alimentation est effiloché ou fissuré, si la fiche et le
connecteur sont endommagés, ou si l’appareil présente une panne ou est endommagé d’une
façon quelconque.
4) NE PAS UTILISER UN ADAPTATEUR OU UNE RALLONGE.
5) Ne pas gêner ni bloquer le flux d'air autour de l'appareil et que rien ne bouche le tuyau
de sortie.
6) Débrancher toujours le climatiseur avant de le déplacer ou d'effectuer opération de
maintenance.
7) Ne pas installer le climatiseur dans un endroit où l’atmoshpère est huileuse ou présente des
gaz combustibles ou du soufre. Éviter que les produits chimiques entrent en contact avec
le climatiseur.
8) Ne placer aucun objet sur le climatiseur.
9) Ne jamais utiliser le climatiseur sans les filtres.
10) Ne pas utiliser le climatiseur à proximité d’une baignoire, d’une douche ou d’un lavabo
ou évier.
(2)
Français

Table de matieres
PAGE
Un mot de Amana..................................................................................................................... 1
Registration du Produit .............................................................................................................. 1
Precautions de Surete................................................................................................................2
Avantages .................................................................................................................................4
Parties et caracteristiques ..........................................................................................................5
Assemblee et Installations .........................................................................................................6
Operation..................................................................................................................................9
Specification du Produit...........................................................................................................12
Soins et nettoyage...................................................................................................................13
Emmagasinage........................................................................................................................13
Detections d’un probleme .......................................................................................................13
Imformations de la garantie....................................................................................................14
(3)
Français

Avantages de ce Model
1. Ce model est facile a operer. L’electronique a un minuteur, thermostat, trois vitesses pour
refroidir, trois ventilateurs et une vitesse de dehumidification (seche).
2. Ce climatiseur portative n’exige pas que l’eau soit ajoutee.
3. Ce produit a une conception unique qui evapore l’eau. Donc une tank de condensation n’est
pas necessaire . Ceci vous evitera de vous lever au milieu de la nuit pour vider le seau et
virez le produit.
4. Une trousse de fenetre facile a installer est incluse et est constituee d’un tuyau
d’echappement, de 2 jets de tuyau, d’une trousse de panneaux de fenetre, d’un connecteur
du tuyau d’echappement.
5. Roulettes directionelles sont inclus pour aider a deplacer le produit d’une maniere
commode pour etre utiliser dans presque n’importe quel domaine.
6. L’ecran du filtre est concu pour l’acces facilement.
7. Les climatiseurs portatifs sont faciles a emmagasiner quand pas utilizes.
(4)
Français

Parties et Caracteristiques
1. Control du panneau
2. Sortie d’air froid
3. Signal du recepteur
4. Poignee de transport
5. Tuyau de sortie d’air
6. Evaporation d’entrée d’air
7. Tuyau d’entrée d’air
8. Tuyau d’ecoulement
9. Fil d’alimentation
Fig. 1
(5)
Français