Amrotec MiB-1 User manual

AMROTEC® MiB-1 OPERATOR’S QUICK HANDBOOK
Know how to place Banknotes onto Hopper correctly
with Hopper Guides
Align banknotes nicely on each edge and place
them in the Note hopper.
Adjust Note guides to the dimension of your
banknotes.
 How to switch to different counting modes?
Press [MODE] key to enter MIX 
SIN LE SORT S-FACE  S-ORIENT
 COUNT modes
Discriminating modes change in sequence every time
the navigation key is pressed:
 Overview of 3.5” LCD Display Screen:
 MIX  SINGLE  S-FACE 
S-ORNT  SORT  COUNT

How to activate ADD function?
ADD key is located on the left side of the control panel with
numeric key 4. ADD function is to provide a cumulative count
of continuous operation (multiple stack or banknotes of processing
banknotes.
It is a useful function when an operator has lot of Stacks of banknotes to count
and accumulates them to Total count.

How to change SPEED of Operation Modes?
[SPEED] key is located on the left side of the control panel
with numeric key 1. Three different counting speeds can
be set for all discriminating modes (MIX / SIN LE / SORT /
S-FACE / S-ORIENT , however, 1000 speed is default and best speed for
higher recognition and less jamming.
User can change COUNT mode (Piece count from 800/1000/1200/1500 notes
per minute, however, recommended speed is 1200.
Select Counting Modes
Detail counting results
User
-
Menu setting
Print various results
Start / Stop / Enter
Counterfeit Detection
Auto / Manual Start

AMROTEC® MiB-1 OPERATOR’S QUICK HANDBOOK
 How to switch currency (USD+CAD currency is
standard, USD is default)
Press [Currency] Button on the left side of the Control
Panel to view all loaded currency on the device in a
separate screen. Select your desire currency by using
navigation arrow keys and press START / STOP to save. Selected
currency will show on the top left corner of the LCD Display screen.
MiB-1 device can be loaded with optional 20 currency software.
How to Auto-Print Receipt to a Printer?
User can set up Automatic printing of count result receipt by choosing
Auto Printing ON. Machine will start printing as soon as banknotes are
removed from Stacker.
Press MENU  1. Service Menu  Password 4.
AUTO PRINT ON (Only prints when Hopper is empty
each time . to confirm your selection and exit.
 How to enter into Denomination Batch (DB) setting
for changes?
By default, all denominations are set to 100 under DB setting from
factory. To make changes, enter into

. Setting DB.
User can modify these batch
number for each denomination
manually and save into Machine
software by pressing START/ENTER
when changes are done.
Changes can be made by using of
numeric keys (0-9 and 4 navigation arrow keys.
How to View Stacker count and denomination break-
down
Press [DISPLAY key on the control panel to view
total stacker count and break-down of all currency
denomination.
 How to switch to Multi-currency Count in mixture
operation and process in a Single-Pass?
Press [Currency] on the Control Panel to view various
choices on a separate screen. Select “MULTI” by using
navigation arrow keys and press START / STOP to
save. Now, device is ready to count and process multiple currencies in
a single-run (for those are loaded into the device .
 Important Counting Modes and explanation:
MIX (As Default Mode)
When Mix mode is selected, Machine will count and denominate
mixture denomination of banknotes and halt in case of no-read or
suspect banknote.
SIN LE
Machine counts and sort first detected genuine banknotes as
standard to Stacker and halt if meet with other denomination.
SORT (for Organized Strap
Machine processes organized denominations in a strap of banknotes
(Strap banknotes from POS cash drawers .
S -FACE (Face-Direction)
Machine delivers first deteced Face of banknote to Stacker and halt
when it sees mismatch face.
S-ORIENT (Orientation)
Machine delivers first deteced Face-up in one orientation of banknote
to Stacker and halt when it sees mismatch of Face-orientation.

How to
set
B
ATCH
by Qty
?
MiB-1 machine allows users to select counting of
banknotes by a specific batch number (1-200 
► Press [BATCH] Key followed by numeric keys (0-9 on the control
panel to select your desire batch number and then press START /
STOP key to confirm the selection. Use ESC Key to erase
batch number.
 How to set and activate Denomination Batch (DB)
for each denomination.
To process each denomination of banknotes by a
fixed pre-set batch number (only apply to SIN LE,
and SORT Counting Mode).
Setting: Switch mode to SIN LE or SORT and Press BATCH
key until appears on top right corner of the display screen.
By default, all denominations are set to 100.
 How to perform
Function for non-
recognized genuine bills in reject pocket.
During counting, if device stops at a genuine and good banknote
for various reasons, user has option to recount the banknote or
remove it to enter its denomination and value into running total.
Press [ESC] key and when denomination screen appears, use
navigation keys to select and use 10-keys to enter new value
