Anova Tuscany T2267R User manual

1
Assembly Instructions
Tuscany 42” Tables
T2267R–Recycled Plastic Table
T2267T–Thermory® Table
anovafurnishings.com
888.535.5005 tel
TOOLS NEEDED:
•5/32” Hex Drive
ASSEMBLY HARDWARE: All hardware is stainless steel.
ASSEMBLY:
The assembly is a one-person operation.
1. Inspect the shipping container contents for
damage and to determine that all components and
hardware are present.
2. Assemble the table over the shipping
packaging or padded work area to avoid
scratching the product.
Note: Before assembling the nuts to the bolts, it is
recommended that a light oil or petroleum jelly be
applied to the screw threads.
3. Locate the table top and place it on the work
surface with the table top supports oriented
upward.
TABLE COMPONENTS:
Thermory Table
Recycled Plastic
(1) Table Top
(2) Legs
(8) ¼”-20 x ¾ ” Button Head
Cap Screws
(8) ¼” Flat Washers
(4) Leg Leveling Feet
Table Top
(8) ¼” Split Locking
Washers

2
4/6/2021 Copyright 2021 ANOVA®Manufactured in the U.S.
4. Locate one of the table legs. Position the leg
so that the tab holes align with the table support
holes inside on both ends. Place a ¼” split
locking washer followed by a ¼” flat washer on a
1/4”-20 x ¾” button head cap screw. Insert a
screw with washer into each tab and tighten
using a 5/32” hex drive.
5. Install the next leg in the same manner.
6. Adjust the leveling feet on the legs as needed.
Note: Table is federally ADA-compliant.
NOTE: Please contact Customer Care at 1-866-797-1761 for assistance in placing a replacement part order.