Anova L1364 User manual

anovafurnishings.com
888.535.5005 tel
Packaging plastic and
cardboard to avoid
scratching the product
.50”
.66”
Bench
Support
Screw Washer
Nut
Contour
Bench Seat
Packaging plastic and
cardboard to avoid
scratching the product
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat Contour
Bench Seat
Washer
Packaging plastic and
cardboard to avoid
scratching the product
ASSEMBLY INSTRUCTIONS
L1364 8  Rendezvous Bench
L1366 12  Rendezvous Bench
L1366A 12  Rendezvous Bench
L1508 8  Horizon Bench
L1512 12  Horizon Bench
L1512A 12  Horizon Bench
TOOLS NEEDED:
9/16” Open-end or Box-end Wrench•
Ratchet with 9/16” Socket•
#4 Phillips Screwdriver•
Level•
ASSEMBLY HARDWARE:
8 x
3/8”
Washer
6 x
3/8”
Nylock Hex Nut
4 x
3/8” X 1.5”
Phillips Head Bolt
ASSEMBLY:
The assembly is a two-person operation.
1. Inspect the shipping container contents for damage and to determine that all components and hardware are present.
2. Place a Contour Bench Seat on the shipping packaging or other so surface to avoid scratching the product.
2 x Contour Bench Seat
Seat pattern may vary.
BENCH COMPONENTS:
3 x Bench Supports
Model L1508 shown.
2 x
3/8” X 2”
Phillips Head Bolt
3. Align the mounting holes in one of the Bench
Supports with the holes in the appropriate end of
the Bench Seat. Insert one of the provided 1.5” long
Bolts through both parts, with the Bolt head on
the outside surface of the Bench Support. Install a
Washer and Nut on the inside end of the Bolt.
Note: Always hold the Bolt head still and turn the Nut.
This protects the surface of the Bench Support
around the Bolt from scratches (the Washer
protects the nut side of the Bench Seat).
Leave the hardware nger tight so that
adjustments can be made to level the Bench Seat.
Install a Bolt, Washer, and Nut through the other
set of mounting holes in that end of the Bench
Seat. Again, leave the hardware nger tight.

Do not drag the assembled unit across any surface.•
This product requires only periodic cleaning with a sponge and a solution of mild detergent and water to•
remove surface dirt. Do not clean with a solvent or petroleum based products.
Furniture must not be used other than for its intended purpose and should be inspected regularly for loose,•
missing, or broken hardware, and general instability.
Furniture that is damaged or appears to be unstable must be removed from service and be repaired or replaced.•
Repairs must be made using only factory authorized parts and methods.•
WARNING
CARE AND
MAINTENANCE
211 North Lindbergh Blvd.
St. Louis, MO 63141
tel: [phone]
web: anovafurnishings.com
11/2012
Packaging plastic and
cardboard to avoid
scratching the product
.50”
.66”
Bench
Support
Screw Washer
Nut
Contour
Bench Seat
Packaging plastic and
cardboard to avoid
scratching the product
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat Contour
Bench Seat
Washer
Packaging plastic and
cardboard to avoid
scratching the product
Packaging plastic and
cardboard to avoid
scratching the product
.50”
.66”
Bench
Support
Screw Washer
Nut
Contour
Bench Seat
Packaging plastic and
cardboard to avoid
scratching the product
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat Contour
Bench Seat
Washer
Packaging plastic and
cardboard to avoid
scratching the product
Packaging plastic and
cardboard to avoid
scratching the product
.50”
.66”
Bench
Support
Screw Washer
Nut
Contour
Bench Seat
Packaging plastic and
cardboard to avoid
scratching the product
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat Contour
Bench Seat
Washer
Packaging plastic and
cardboard to avoid
scratching the product
The feet of the Bench Supports feature a surface
mount cutout for securing the Bench with
customer supplied surface mount hardware.
Packaging plastic and
cardboard to avoid
scratching the product
.50”
.66”
Bench
Support
Screw Washer
Nut
Contour
Bench Seat
Packaging plastic and
cardboard to avoid
scratching the product
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat Contour
Bench Seat
Washer
Packaging plastic and
cardboard to avoid
scratching the product
Surface mount cutout dimensions
4. Repeat Step 3 with the other Bench Seat section
and one of the other Bench Supports as shown.
5. Position the remaining Bench Support between the two Bench Seat
sections and assemble them using the 2” bolts as shown. Use a Washer
for both the Nut and Bolt head as shown. Leave the hardware nger tight
so adjustments can be made to level the Bench Seat.
6. Tighten the Bench Seat hardware using the Screwdriver and Ratchet
Wrench while checking the Seat surface with a Level; minor adjustments
can be made while tightening the hardware to make the Seat level.
7. Retighten all hardware two weeks aer initial assembly.
Packaging plastic and
cardboard to avoid
scratching the product
.50”
.66”
Bench
Support
Screw Washer
Nut
Contour
Bench Seat
Packaging plastic and
cardboard to avoid
scratching the product
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat
Bench
Support
Screw
Washer
Nut
Contour
Bench Seat Contour
Bench Seat
Washer
Packaging plastic and
cardboard to avoid
scratching the product
The Models L1366A and L1512A benches
have three additional holes in the center
seat slat of each seating section to mount
a Center Armrest.
Position the Armrest with the threaded
studs inserted through the mounting
holes. Fasten the Armrest using a
Flat Washer and Nylock Nut on each
mounting stud.