APRILIA eSR1 User manual

User’s manual
Manuale d’uso
Manual del usuario
Mode d’emploi
Benutzerhandbuch
Instrukcja obsługi
Návod k použití
Návod na použitie
Ръководство за употреба
Εγχειρίδιο χρήσης
Navodila za uporabo
Uputstvo za upotrebu
Handleiding
Kullanım kılavuzu
دليل الاستخدام
EN
IT
ES
FR
DE
PL
CZ
SK
BG
EL
SL
SR
NL
TR
AR

01
English.........................................02
Italiano.........................................40
Español........................................78
Français..................................... 116
Deutsch ..................................... 154
Polski......................................... 192
Čeština....................................... 230
Slovenčina................................. 268
Български ................................ 306
Ελληνικά.................................... 344
Slovenščina............................... 382
Srpski......................................... 420
Nederlands................................ 458
Türkçe........................................ 496
يبرع............................................. 534

02
User manual
Instructions translated from the original Italian
Thank you for choosing this product.
For information, technical support, assistance or to consult the general terms of the
warranty, please contact your dealer or visit the website www.apriliasmartmovement.com
English
This manual is valid for the following electric scooters:
eSR1
eSR2
eSR2 Evo
eSRZ

03
1. Safety instructions
2. Package contents and assembly
3. Product overview
4. Battery charging and activation
5. Command information / Control panel
6. Quick guide
7. Folding and carrying
8. Range and performance
9. Storage, maintenance and cleaning
10. Appconguration
11. Technical data sheet
12. Troubleshooting
13. Liability and general terms of warranty
14. Information on disposal
15. Declaration of conformity
Contents

04
1. Safety instructions
IMPORTANT! Carefully read and follow the instructions below before using the product.
Keep this manual for future reference or new users.
Take the time to learn the basics of the procedure to avoid severe accidents that may occur
intherstfewmonths.Contactyourdealerforthepropersupportonhowtousetheitem
correctly or to be directed to an appropriate training organisation.
The company assumes no direct or indirect responsibility arising from misuse of the item,
non-compliance with both the highway code and the instructions in the manual, accidents
or disputes caused by non-compliance or illegal activity.
This product is to be used for recreational purposes, by one person only and without
passengers, therefore it cannot be used by more than one person at a time.
Do not modify the intended use of the vehicle in any way. The item is not suitable for
stunts, competitions, transporting objects, towing other vehicles or trailers.
The electric scooter must be used carefully, always respecting the rules imposed by the
Highway Code of the country where it is used, in order to avoid dangerous situations and
to take the utmost care of yourself and others.
CAUTION
Driving requirements:
Scooter model eSR2 eSR2 EVO eSR1 eSRZ
Product code
without indicators AP-MO-210002 AP-MO-210003 AP-MO-210001 AP-MO-210005
Product code with
indicators included AP-MO-210006 - - AP-MO-210007
MIN weight (Kg) 30 30 30 30
MAX weight (Kg) 100 100 100 100
MIN age * 14 14 14 14
MAX age * 65 65 65 65
MIN height (cm) 120 120 120 120
MAX height (cm) 200 200 200 200
* Before using the product, check and follow local regulations regarding the minimum age of the driver, restrictions
on the type of drivers who can use the product and on the use of the product itself.
The A-weighted emission sound pressure level (noise) at the rider’s ear is less than
70dB(A).

05
Symbols identifying the safety warnings
To identify the safety messages in this manual, the following graphic warning symbols will
be used. They draw the focus of attention of the reader/user to the proper, safe use of the
item.
CAUTION
Pay attention
Highlights the rules to follow to prevent damage to the item and/or prevent hazardous
situations from arising.
DANGER
Residual risks
Highlights the presence of hazards that generate residual risks to which the user must pay
attention to avoid injury or material damage.
General warnings
CAUTION
It is important to bear in mind that when out in a public space or on the road, even when
the instructions in the manual are observed down to the letter, the rider is not immune
to injury caused by infractions or inappropriate actions taken towards other vehicles,
obstacles or persons. Misuse of the item or non-compliance with the instructions provided
in this manual may cause severe injury.
This product is an electric vehicle. The faster you ride, the longer the braking distance.
Emergency braking on slippery, muddy, wet or icy roads may result in wheel spin and loss
of balance. Adequate speeds and safety distances from other vehicles or pedestrians must
be adhered to. Take extra care when riding on unfamiliar roads. Do not open the kickstand
when using the item, risk of severe personal injury and damage to item.
CAUTION
On wet roads, the braking distance increases and the grip decreases compared to dry
roads!
Drive more carefully, keep a safe distance!
For personal safety, wear a helmet, and knee and elbow pads to protect against falls and
injuries while riding the item. When allowing others to use the item, ensure that the rider
wears the safety equipment and explain the operation of the vehicle. To avoid injury, do not
allow other persons to use the item if they do not know how to use it. Wear shoes before
using the item.
Children must not play with the scooter or its parts, nor should they be allowed to clean it
or perform maintenance operations.
When riding, take special care to not frighten children or pedestrians. When passing
behind them, warn them by sounding the horn and slow down using the minimum speed of
6km/h.

06
Instructions and warnings on rider behaviour
Conditions Appropriate/intended use Improper use
Riders One More than one person, with children or
animals
Safety equipment Helmet, knee pads, elbow pads,
reectivevest
No safety equipment
Pre-riding check
Prior to each use, check brakes and
any wear, check tyre pressure (see
side of tyre for recommended value),
wheel wear, throttle, indicators, lights
and charge status of battery.
Never checking the item prior to use
If any unusual noises or faults are
detected, do not use the item and
contact your dealer or the Authorised
Technical Support Department
Using the item when noise or faults are
present
Walking while
pushing the item
Not accelerating Depressing the throttle
Pushing while walking across
pedestrian crossings
Riding the vehicle on pedestrian
crossings
In pedestrian areas when not in
pedestrian mode (6 km/h)
Riding the vehicle in pedestrian areas
when not in pedestrian mode (6 km/h)
In overcrowded areas Riding the vehicle in overcrowded areas
Stationary
The person riding the item must be
able to easily place both feet on the
ground while holding the handlebars
at the correct height
Not being able to keep the item
stationary and balanced.
Sitting on the item while it is running or
stationary
No objects hanging from handlebars Objects hanging from handlebars
result in instability and may impede
manoeuvring
Riding with both hands on
handlebars.
One-handed or hand-free riding
Not using devices such as phones,
smartwatches, music players, or
headphones
Using devices such as phones,
smartwatches, music players, or
headphones
Riding with both feet on the footrest
comfortably and safely
Riding with one or both feet outside the
footrest
It is prohibited to place or amass weight
on the rear mudguard.
Riding under
normal conditions
Riding with helmet and protective
equipment
Riding without helmet and protective
equipment

07
Conditions Appropriate/intended use Improper use
Riding on easily accessible, smooth
and compact roads, avoiding areas
withintensetrafcorovercrowded
areas:
e.g. dedicated cycle path, smooth
paved surfaces
Riding on motorways, long-distance
roads
Riding on busy roads
Riding on pavements
Riding in overcrowded areas
Riding on very rough roads
Riding near: ravines, escarpments,
harbours, sea, lakes or rivers
Complying with local regulations and
the highway code
Failure to comply with regulations and
the highway code
Looking ahead and watching out
for obstacles, vehicles or nearby
pedestrians
Becoming distracted while riding
Changing direction, making sure to
be seen, moderating speed
Changing direction abruptly at high
speed without making sure that you
have been seen
Anticipating the route and
moderating speed while observing
the highway code and those that are
the most vulnerable
Braking and cornering at the same time
makes the vehicle unstable
Using direction indicators, if included
on the item
Not using direction indicators
Slowing down when pedestrians are
present
Accelerating or maintaining a constant
speed when pedestrians are present
Using pedestrian mode in pedestrian
areas (6 km/h)
Riding without using pedestrian mode in
pedestrian areas (6 km/h)
Warning others of your presence by
using the bell
Not warning others of your presence by
using the bell
Uneven road
conditions:
speed bumps/
steps/rough road
surfaces
Riding at moderate speeds High-speed riding
Bend knees slightly for better shock
absorption when traversing uneven
surfaces.
Accelerating over bumps or ditches,
going down steps, jumping over
obstacles, climbing pavements, riding
harshly.
Behaviour:
around bends,
down slopes, in
the presence of
nearby obstacles,
vehicles and
pedestrians
Keeping at a safe distance Not observing safety distances
Ceasing to accelerate
Braking and slowing down
Accelerating
Riding at moderate speed and
braking safely
Riding at high speed, braking suddenly
Paying attention to doors and other
high obstacles
Traversing beneath high obstacles

08
Conditions Appropriate/intended use Improper use
Visibility conditions
Only ride if there is enough light
to ride safely. When riding in
unfavourable lighting conditions
(from half an hour following sunset,
throughout the entire period of
darkness and even during the day,
if weather conditions preclude
road visibility, when driving through
tunnels), remember to switch on the
item’slightsandwearareective
vest, belts or bands.
Riding in unfavourable lighting
conditions with lights off and without
usingareectivevest,beltsorbands.
Weather
conditions
Driving in optimal conditions (no
rain)
Driving in adverse conditions:
in the rain, in case of snowfall, in the
presence of ice or mud on the road, in
case of strong wind and fog.
Parking
In designated areas without
impeding movement of vehicles or
pedestrians
Everywhere, impeding movement of
vehicles or pedestrians
On smooth surfaces, ensuring
stability is maintained
On uneven surfaces and without
ensuring stability
Switching off the item and using an
anti-theft device
Using the kickstand provided
Leaving the item switched on,
unattended with no anti-theft device
Engaging in
extreme sports/
acrobatics
NO YES
Riding near: ravines, escarpments,
harbours, sea, lakes or rivers
Riding through puddles
Racing with other vehicles
Subjecting the
item to forceful
impact
NO YES
jumping over object or persons, jumping
off steps or from high places
What to do after a fall:
Check that the throttle lever works properly. To do this, accelerate and decelerate several
times.
Check that the brakes work properly. To do this, get off the item, push it forward and brake
to ensure it responds to the controls.
Check that all vehicle components are in place and securely fastened.
Check tyre wear and pressure (see side of tyre for recommended value).
Check the wear of the brakes and cables.
DANGER
The brakes may become hot during use. Do not touch after use.

09
Assembled item, the handlebar must be installed using the special screws contained in the
package.
Model Reference picture In the package Handlebar assembly
eSR2
battery charger
charging cable
2 M5 screws and
2 washers
size 3 Allen
wrench
eSR2 EVO
eSR1
battery charger
charging cable
4 M6 screws
size 4 and 5 Allen
wrench
adapter for
inatingthetires
2 wrenches
to remove the
battery
eSRZ
Battery charger
with charging
cable
4 screws
adapter for
inatingthetires
3 Allen wrenches
1 spanner
2. Package contents and assembly

10
Method:
• Take the item out of the packaging
• Open the kickstand and check that the item is stable
• Open the handlebar stem and secure it by closing the lever of the closing mechanism
• Connect the display power cable to the main wiring
• Install the handlebar on the stem (do not crush the cables)
• Tighten the screws on the stem using the wrench supplied
• Adjust the stem closing mechanism*
Model Reference picture * Adjustment
eSR2
eSR2 EVO
There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after
closing, adjust the screw in the mechanism,
by tightening or loosening it as required to
increase the stability of the stem.
eSR1
Outside the mechanism there is a hex socket
screw. If the handlebar stem is not very
stable after closing, adjust the screw in the
mechanism, by tightening or loosening it as
required to increase the stability of the stem.
eSRZ
There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after
closing, adjust the screw in the mechanism,
by tightening or loosening it as required to
increase the stability of the stem.

11
CAUTION
Assemble the product correctly. If, during assembly, any factory defects are detected,
certain steps are unclear or issues with assembly or adjustments occur, do not ride the
vehicle and contact your dealer or visit www.apriliasmartmovement.com for technical
support.
Do not use accessories and/or additional parts that are not approved by the manufacturer.
Keep children away from plastic items (including packaging materials) and small parts that
may result in suffocation.
It is forbidden to modify or transform the item or any its parts in any way, as this may impair
efciency,reducestructuralintegrityandcausedamage.Removeanysharpedgescaused
by misuse, breakage or damage to the item. If any factory defects, unusual noises or faults
are detected, do not ride the vehicle and contact your dealer or visit
www.apriliasmartmovement.com for technical support.

12
In the interest of technological development, the manufacturer reserves the right to modify
the item with no prior notice and this manual will not be automatically updated.
For information and to consult the revisions of this manual, visit the website
www.apriliasmartmovement.com
eSR2
3. Product overview
Display
Throttle
Brake lever
Motor and
electronic
brake
Locking catch
Footrest
Locking
catch
Stand Frame Rear suspension
fork
Safety
mechanism
Locking
mechanism
Front
suspension
fork
Drum brake

13
eSR2 EVO
Display
Throttle
Brake lever
Motor and
electronic
brake
Locking catch
Footrest Locking catch
Stand Frame Rear suspension
fork
Safety
mechanism
Locking
mechanism
Front
suspension
fork
Drum brake

14
eSR1
Display
Throttle
Brake lever
Disc
brake
Locking catch
Footrest
Locking catch
StandFrame
Safety mechanism
Locking
mechanism
Headlight
Motor and
electronic
brake

15
eSRZ
Display
Throttle
Brake lever with bell
Disc brake
Locking catch
Footrest
Rear
wheel
Mudguard with
locking catch
Frame
Safety and
closure
mechanism
Headlight
Rear light
Motor with
electronic brake
Charging
port
Stand

16
4. Battery charging and activation
Priortousingtheitemforthersttime,chargeto100%.Ensuretheitem,charger,and
charging port are dry.
Instructions
Open the kickstand
Switch off the item
Model Reference picture Instructions
eSR2
eSR2 EVO
- Remove the rubber cover from the
charging socket
- Connect the battery charger to
the charging port and then to the
power socket.
- When the item is fully charged, the
light on the charger changes from
red (charging) to green (charging
complete).
- After charging, close the rubber
cover on the charging socket
- Unplug the battery charger from
the power socket
eSR1
A
B
C
A
B
C
A
B
C
A
B
C
- To access the battery, lift the
footrest
- Switch off the battery if there is a
red button (B)
- Connect the battery charger to the
charging port (B) and then to the
power socket.
- When the item is fully charged, the
light on the charger changes from
red (charging) to green (charging
complete).
- After charging, close the rubber
cover on the charging socket
- Unplug the battery charger from
the power socket
- The battery can be removed; use
the wrenches supplied to release
the lock (C)
- Disconnect the power connector
and remove the battery.

17
eSRZ
- Remove the rubber cover from the
charging socket
- Connect the battery charger to
the charging port and then to the
power socket.
- When the item is fully charged, the
light on the charger changes from
red (charging) to green (charging
complete).
- Disconnect the battery charger
from the charging port and put
back the rubber cover in the
charging socket.
- Unplug the battery charger from
the power socket.
CAUTION
To recharge the item, use the battery charger supplied ONLY
Model Battery charger model Output voltage Charging time
eSR2 HLT-180-4201500 42V – 1.5A 5-6 h
eSR2 EVO HLT-180-5462000 54V – 2.0A 6-7 h
eSR1 XVE063-4200150 42V – 1.5A 6-8 h
eSRZ FY0684201500 42V – 1.5A 4-5 h
Using another type of charger may damage the scooter or entail other potential risks.
Never leave the product unsupervised while it is charging. Do not switch the product on
while it is charging.
After each use, fully recharge the battery to extend its useful life. Do not recharge the item
immediately after use. Allow the scooter to cool for an hour before recharging.
The item should not be charging for extended periods. Overcharging reduces battery life
and poses additional potential hazards.
Allow the vehicle to discharge completely to prevent damage to the battery.

18
Damage caused by the battery being left uncharged for a long period is irreversible and is
not covered by the limited warranty. Once the damage has occurred, the battery cannot be
recharged(thebatterymustnotbedismantledbyunqualiedpersonnel,asthiscouldlead
to electric shocks, short circuits or even major safety incidents). If the owner is away, e.g.
on holiday, and the device is entrusted to a third party, leave it in a partial charge state (20-
50%charge),notfullycharged.
Carry out regular visual inspection of the charger and charger cables. If the battery charger
cable is clearly damaged, do not use it to avoid further damage and/or risks; please contact
us for a replacement.
Battery warnings
The battery consists of lithium-ion cells and chemical elements that are hazardous to
health and the environment. Do not use the item if it emits odours, substances or excessive
amounts of heat. Do not dispose of the item or the battery with household waste. The end
user is responsible for the disposal of electrical and electronic equipment and batteries in
compliance with all applicable regulations.
Avoid used, defective and/or non-original batteries of other models or brands.
DANGER
Donotleavethebatterynearreorheatsources.Fireandexplosionhazard.
Do not open the battery or take it apart. Do not strike, throw, or puncture the battery or
attach objects onto it.
Do not touch any substances leaking from the battery, as they are deemed hazardous. Do
not allow children or pets to touch the battery.
Do not overcharge or short-circuit the battery. Fire and explosion hazard.
Do not immerse or expose the battery to water, rain or other liquids. Do not expose the
battery to direct sunlight, excessive heat or cold (for example, do not leave the item or
battery in a car in direct sunlight for extended periods of time), or environments containing
explosivegasesorames.
Do not carry or store the battery with metal objects such as hairpins, necklaces, etc.
Contact between metal objects and battery contacts may cause a short circuit resulting in
physical injury or death.

19
eSR2 /eSR2 EVO eSR1
Activation of direction indicators (if any)
C D
B
AC D
B
A
Throttle (A): press down to accelerate.
Power button (B): Press to switch the item on/off.
Brake lever (C): pull the lever to brake
Speed level change: press the button (B) once
to select the desired level.
Quickly press 3 times in a row to switch from
Km/h to Mph.
Quickly press 4 times in a row to switch from
ODO to TRIP.
Lights: press the button (B) twice to switch them
on/off.
Bell: press button (D) once to activate it.
Throttle (A): press down to accelerate.
Power button (B): press to switch the item on/off.
Brake lever (C): pull the lever to brake
Speed level change: press the button (B) twice
to select the desired level.
Lights: press the button (B) once to switch them
on/off.
Horn: press the button (D) once to activate it
eSRZ
Throttle (A): press down to accelerate.
ON button (B): press for 2 seconds to turn on or off the item.
Brake lever (C): pull the lever to brake
Speed level change: press the button (B) twice to select the desired level.
Lights: press the button (B) once to switch them on/off.
ODO/Trip: press button (B) 3 times to switch mode
Km/h-Mph: press button (B) 4 times to switch mode
Bell: press lever (D) once to activate it
5. Command information / Control panel
Activation of direction indicators (if any)