APRILIA eSR1 User manual

EN User’s manual
IT Manuale d’uso
ES Manual del usuario
FR Mode d’emploi
DE Benutzerhandbuch
PL Instrukcjaobsługi
CZ Návodkpoužití
SK Návodnapoužitie
PT Manual de utilização
EL Εγχειρίδιοχρήσης
SL Navodila za uporabo
SR Uputstvo za upotrebu
NL Handleiding
AR  

01
English.........................................02
Italiano.........................................35
Español........................................68
Français..................................... 101
Deutsch ..................................... 134
Polski......................................... 167
Čeština....................................... 200
Slovenčina................................. 233
Português.................................. 266
Ελληνικά.................................... 299
Slovenščina............................... 332
Srpski......................................... 365
Nederlands................................ 398
يبرع............................................. 431

02
User manual
Instructions translated from the original Italian
Thank you for choosing this item.
For information, technical support, assistance or to consult the general terms of the
warranty, please contact your dealer or visit the website www.apriliasmartmovement.com
English
This manual refers to the following electric scooters:
eSR1
eSR2
eSR2 EVO

03
1. Safety instructions
2. Package contents and assembly
3. Product overview
4. Battery charging and activation
5. Command information / Control panel
6. Quick guide
7. Folding and carrying
8. Range and performance
9. Storage, maintenance and cleaning
10. Appconguration
11. Technical data sheet
12. Troubleshooting
13. Liability and general terms of warranty
14. Information on disposal
15. Declaration of conformity
Contents

04
1. Safety instructions
IMPORTANT! Read and follow the instructions carefully before using the item. Retain the
manual for future reference or new users.
Take the time to learn the basics of the procedure to avoid severe accidents that may occur
intherstfewmonths.Contactyourdealerforthepropersupportonhowtousetheitem
correctly or to be directed to an appropriate training organisation.
The company assumes no direct or indirect responsibility arising from misuse of the item,
non-compliance with both the highway code and the instructions in the manual, accidents
or disputes caused by non-compliance or illegal activity.
This item should be used for recreational purposes and should not be used for passenger
transportation. It must be used by more than one person at a time.
Do not modify the intended use of the vehicle in any way. The item is not suitable for
stunts, competitions, transporting objects, towing other vehicles or trailers.
The maximum permissible load of the item is:
eSR2 eSR2 EVO eSR1
100 kg 100 kg 100 kg
The maximum suggested rider height is 200 cm.
Check local regulations regarding the minimum age of the rider, restrictions on the type of
rider who may use the item, and the use of the item itself before using it, and be sure to
follow local regulations.
The A-weighted emission sound pressure level at the rider’s ear is less than 70 dB(A).
Visual representation of safety warnings
The following visual symbols are used to identify safety messages in this manual. They
draw the focus of attention of the reader/user to the proper, safe use of the item.
CAUTION
Pay attention
Highlights the rules to follow to prevent damage to the item and/or prevent hazardous
situations from arising.
DANGER
Residual risks
Highlights the presence of hazards that generate residual risks to which the user must pay
attention to avoid injury or material damage.

05
General warnings
CAUTION
It is important to bear in mind that when out in a public space or on the road, even when
the instructions in the manual are observed down to the letter, the rider is not immune
to injury caused by infractions or inappropriate actions taken towards other vehicles,
obstacles or persons. Misuse of the item or non-compliance with the instructions provided
in this manual may cause severe injury.
This item is a vehicle. The faster you ride, the longer the braking distance. Emergency
braking on slippery, muddy, wet or icy roads may result in wheel spin and loss of balance.
Adequate speeds and safety distances from other vehicles or pedestrians must be adhered
to. Take extra care when riding on unfamiliar roads. Do not open the kickstand when using
the item, risk of severe personal injury and damage to item.
For personal safety, wear a helmet, and knee and elbow pads to protect against falls and
injuries while riding the item. When allowing others to use the item, ensure that the rider
wears the safety equipment and explain the operation of the vehicle. To avoid injury, do not
allow other persons to use the item if they do not know how to use it. Wear shoes before
using the item.
Supervise children to make sure they do not play with the item. Strict supervision is
required if the item is being used near children.
When riding, take special care to not frighten children or pedestrians. When approaching
them from behind, warn them and slow down using the minimum speed of 6 km/h.

06
Instructions and warnings on rider behaviour
Conditions Appropriate use Improper use
Riders One More than one person, with children
or animals
Safety equipment Helmet, knee pads, elbow pads No safety equipment
Pre-riding check
Prior to each use, check brakes and
any wear, check tyre pressure (see
side of tyre for recommended value),
wheel wear, throttle and charge status
of battery.
If any unusual noises or faults are
detected, do not use the item and
contact dealer or Technical Support
Department.
Never checking the item prior to use
Using the item when noise or faults
are present
Walking while
pushing the item
Not accelerating Depressing the throttle
Pushing while walking across
pedestrian crossings
Riding the vehicle on pedestrian
crossings
In pedestrian areas when not in
pedestrian mode (6 km/h)
Riding the vehicle in pedestrian
areas when not in pedestrian mode
(6 km/h)
In overcrowded areas Riding the vehicle in overcrowded
areas
Stationary
The person riding the item must be
able to easily place both feet on the
ground while holding the handlebars at
the correct height
Not being able to keep the item
stationary and balanced.
Sitting on the item while it is running
or stationary

07
Conditions Appropriate use Improper use
Riding under
normal conditions
No objects hanging from handlebars
Objects hanging from handlebars
result in instability and may impede
manoeuvring
Riding with both hands on handlebars. One-handed or hand-free riding
Not using devices such as phones,
smartwatches, music players, or
headphones
Using devices such as phones,
smartwatches, music players, or
headphones
Riding with both feet on the footrest
comfortably and safely
Riding with one or both feet outside
the footrest
It is prohibited to place or amass
weight on the rear mudguard.
Riding with helmet and protective
equipment
Riding without helmet and protective
equipment
Riding on easily accessible, smooth
compact roads, avoiding heavily
trafckedorovercrowdedareas:
e.g. dedicated cycle paths, smooth
paved surfaces
Riding on motorways, long-distance
roads
Riding on busy roads
Riding on pavements
Riding in overcrowded areas
Riding on very rough roads
Riding near: ravines, escarpments,
harbours, sea, lakes or rivers
Complying with local regulations and
the highway code
Failure to comply with regulations
and the highway code
Looking ahead and watching out
for obstacles, vehicles or nearby
pedestrians
Becoming distracted while riding
Changing direction, making sure to be
seen, moderating speed
Anticipating the route and moderating
speed while observing the highway
code and those that are the most
vulnerable
Using direction indicators, if included
on the item
Changing direction abruptly at high
speed without making sure that you
have been seen
Braking and cornering at the same
time makes the vehicle unstable
Not using direction indicators
Slowing down when pedestrians are
present
Using pedestrian mode in pedestrian
areas (6 km/h)
Warning others of your presence by
using the bell
Accelerating or maintaining a
constant speed when pedestrians are
present
Riding without using pedestrian mode
in pedestrian areas (6 km/h)
Not warning others of your presence
by using the bell

08
Conditions Appropriate use Improper use
Uneven road
conditions:
speed bumps/
steps/rough road
surfaces
Riding at moderate speeds
Bend knees slightly for better shock
absorption when traversing uneven
surfaces.
High-speed riding
Accelerating over bumps or ditches,
going down steps, jumping over
obstacles, climbing pavements, riding
harshly.
Behaviour:
when cornering,
going downhill,
when obstacles,
vehicles or nearby
pedestrians are
present
Keeping at a safe distance
Ceasing to accelerate
Braking and slowing down
Riding at moderate speed and braking
safely
Paying attention to doors and other
high obstacles
Not observing safety distances
Accelerating
Riding at high speed, braking
suddenly
Traversing beneath high obstacles
Visibility
conditions
Only ride if there is enough light to ride
safely. When riding in unfavourable
lighting conditions (from half an hour
following sunset, throughout the entire
period of darkness and even during
the day, if weather conditions preclude
road visibility, when driving through
tunnels), remember to switch on the
item’slightsandwearareectivevest,
belts or bands.
Riding in unfavourable lighting
conditions with lights off and without
usingareectivevest,beltsor
bands.
Weather
conditions Riding in optimal weather conditions
Riding in adverse weather conditions:
in the rain, when it snows, when
there is ice or mud on the road, in
strong winds, in fog.
Parking
In designated areas without impeding
movement of vehicles or pedestrians
On smooth surfaces, ensuring stability
is maintained
Switching off the item and using an
anti-theft device
Everywhere, impeding movement of
vehicles or pedestrians
On uneven surfaces and without
ensuring stability
Leaving the item switched on,
unattended with no anti-theft device

09
Conditions Appropriate use Improper use
Engaging in
extreme sports/
acrobatics
NO
YES
Riding near: ravines, escarpments,
harbours, sea, lakes or rivers
Riding through puddles
Racing with other vehicles
Subjecting the
item to forceful
impact
NO
YES
jumping over object or persons,
jumping off steps or from high places
What to do after a fall:
Check that the throttle lever works properly. To do this, accelerate and decelerate several
times.
Check that the brakes work properly. To do this, get off the item, push it forward and brake
to ensure it responds to the controls.
Check that all vehicle components are in place and securely fastened.
Check tyre wear and pressure (see side of tyre for recommended value).
Check the wear of the brakes and cables.
DANGER
The brakes may become hot during use. Do not touch after use.

10
Assembled item, the handlebar must be installed using the special screws contained in the
package.
MODEL REFERENCE PICTURE IN THE
PACKAGE
HANDLEBAR ASSEMBLY
eSR2
battery charger
charging cable
2 M5 screws
and 2 washers
size 3 Allen
wrench
eSR2 EVO
eSR1
battery charger
charging cable
4 M6 screws
size 4 and 5
Allen wrench
adapter for
inatingthetires
2 wrenches
to remove the
battery
Method:
• Take the item out of the packaging
• Open the kickstand and check that the item is stable
• Open the handlebar stem and secure it by closing the lever of the closing mechanism
2. Package contents and assembly

11
• Connect the display power cable to the main wiring
• Install the handlebar on the stem (do not crush the cables)
• Tighten the screws on the stem using the wrench supplied
• Adjust the stem closing mechanism*
MODEL REFERENCE PICTURE * ADJUSTMENT
eSR2
eSR2 EVO
There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after
closing, adjust the screw in the mechanism, by
tightening or loosening it as required to increase
the stability of the stem.
eSR1
Outside the mechanism there is a hex socket
screw. If the handlebar stem is not very stable after
closing, adjust the screw in the mechanism, by
tightening or loosening it as required to increase
the stability of the stem.
CAUTION
Assemble the item correctly. If, during assembly, any factory defects are detected, certain
steps are unclear or issues with assembly or adjustments occur, do not ride the vehicle and
contact your dealer or visit www.apriliasmartmovement.com for technical support.
Do not use accessories and/or additional parts that are not approved by the manufacturer.
Keep children away from plastic items (including packaging materials) and small parts that
may result in suffocation.
It is forbidden to modify or transform the item or any its parts in any way, as this may
impairefciency,reducestructuralintegrityandcausedamage.Removeanysharp
edges caused by misuse, breakage or damage to the item. If any factory defects, unusual
noises or faults are detected, do not ride the vehicle and contact your dealer or visit www.
apriliasmartmovement.com for technical support.

12
In the interest of technological development, the manufacturer reserves the right to modify
the item with no prior notice and this manual will not be automatically updated.
For information and to consult the revisions of this manual, visit the website:
www.apriliasmartmovement.com
eSR2
3. Product overview
Display
Throttle
Brake lever
Motor and
electronic
brake
Locking catch
Footrest
Locking
catch
Stand Frame Rear suspension
fork
Safety
mechanism
Locking
mechanism
Front
suspension
fork
Drum brake

13
eSR2 EVO
Display
Throttle
Brake lever
Motor and
electronic
brake
Locking catch
Footrest
Locking
catch
Stand Frame Rear suspension
fork
Safety
mechanism
Locking
mechanism
Front
suspension
fork
Drum brake

14
eSR1
Display
Throttle
Brake lever
Disc brake
Locking catch
Footrest
Locking
catch
StandFrame
Safety
mechanism
Locking
mechanism
Motor and
electronic
brake

15
4. Battery charging and activation
Priortousingtheitemforthersttime,chargeto100%.Ensuretheitem,charger,and
charging port are dry.
Instructions
Open the kickstand
Switch off the item
MODEL REFERENCE PICTURE INSTRUCTIONS
eSR2
eSR2 EVO
- Remove the rubber cover from the
charging socket
- Connect the battery charger to
the charging port and then to the
power socket.
- When the item is fully charged, the
light on the charger changes from
red (charging) to green (charging
complete).
- After charging, close the rubber
cover on the charging socket
- Unplug the battery charger from
the power socket
eSR1
A
B
C
- To access the battery, lift the
footrest
- Switch off the battery if there is a
red button (B)
- Connect the battery charger to the
charging port (B) and then to the
power socket.
- When the item is fully charged, the
light on the charger changes from
red (charging) to green (charging
complete).
- After charging, close the rubber
cover on the charging socket
- Unplug the battery charger from
the power socket
- The battery can be removed; use
the wrenches supplied to release
the lock (C)
- Disconnect the power connector
and remove the battery.

16
CAUTION
To recharge the item, use the battery charger supplied ONLY
MODEL BATTERY CHARGER MODEL OUTPUT VOLTAGE RECHARGE TIME
eSR2 HLT-180-4201500 42V – 1.5A 5-6 h
eSR2 EVO HLT-180-5462000 54V – 2.0A 6-7 h
eSR1 XVE063-4200150 42V – 1.5A 6-8 h
Using another type of charger may damage the scooter or entail other potential risks.
Never leave the item unsupervised while it is charging. Do not ride the item while charging.
After each use, fully recharge the battery to extend its useful life. Do not recharge the item
immediately after use. Allow the scooter to cool for an hour before recharging.
The item should not be charging for extended periods. Overcharging reduces battery life
and poses additional potential hazards.
Allow the vehicle to discharge completely to prevent damage to the battery.
Damage caused by the battery being left uncharged for a long period is irreversible and is
not covered by the limited warranty. Once the damage has occurred, the battery cannot be
recharged(thebatterymustnotbedismantledbyunqualiedpersonnel,asthiscouldlead
to electric shocks, short circuits or even major safety incidents). If the owner is away, e.g.
on holiday, and the device is entrusted to a third party, leave it in a partial charge state (20-
50%charge),notfullycharged.
Carry out regular visual inspection of the charger and charger cables. Check whether the
charger cable shows clear signs of damage. Do not use the charger to prevent further
damage, contact us for a replacement.
Battery warnings
The battery consists of lithium-ion cells and chemical elements that are hazardous to
health and the environment. Do not use the item if it emits odours, substances or excessive
amounts of heat. Do not dispose of the item or the battery with household waste. The end
user is responsible for the disposal of electrical and electronic equipment and batteries in
compliance with all applicable regulations.
Avoid used, defective and/or non-original batteries of other models or brands.
DANGER
Donotleavethebatterynearreorheatsources.Fireandexplosionhazard.
Do not open the battery or take it apart. Do not strike, throw, or puncture the battery or
attach objects onto it.
Do not touch any substances leaking from the battery, as they are deemed hazardous.

17
Do not allow children or pets to touch the battery.
Do not overcharge or short-circuit the battery. Fire and explosion hazard.
Do not immerse or expose the battery to water, rain or other liquids.
Do not expose the battery to direct sunlight, excessive heat or cold (for example, do
not leave the item or battery in a car in direct sunlight for extended periods of time), or
environmentscontainingexplosivegasesorames.
Do not carry or store the battery with metal objects such as hairpins, necklaces, etc.
Contact between metal objects and battery contacts may cause a short circuit resulting in
physical injury or death.
5. Command information / Control panel
eSR2 /eSR2 EVO eSR1
C D
B
AC D
B
A
Throttle (A): press down to accelerate.
Power button (B): Press to switch the item on/off.
Brake lever (C): pull the lever to brake
Speed level change: press the button (B) once
to select the desired level.
Quickly press 3 times in a row to switch from
Km/h to Mph.
Quickly press 4 times in a row to switch from
ODO to TRIP.
Lights: press the button (B) twice to switch them
on/off.
Horn: press the button (D) once to activate it
Throttle (A): press down to accelerate.
Power button (B): press to switch the item on/off.
Brake lever (C): pull the lever to brake
Speed level change: press the button (B) twice
to select the desired level.
Lights: press the button (B) once to switch them
on/off.
Horn: press the button (D) once to activate it

18
MODEL REFERENCE PICTURE SYMBOLS
eSR2
eSR2 EVO
7 43
2
10
95
11
6 8
1
1. Battery Level: The battery level is indicated
by 4 bars.
2. Speedometer: Displays the current speed of
the scooter.
3. ODO: Total distance travelled.
4. TRIP: Single trip distance.
5. Lights indicator light.
6. Level 1 - The display will show 1
(up to 6 km/h).
7. Level 2 - The display will show 2
(up to 20 km/h).
8. Level 3 - The display will show 3
(up to 25 km/h).
9. Cruise Control: Speed control. It is activated
after the same speed has been maintained
for a few seconds. The display emits a short
beep.
10.Service light: indicates that maintenance is
required by the assistance service
11. Bluetooth light: always on
eSR1
1 2
43
5
9
8
7
6
1. Battery Level: The battery level is indicated
by 7 bars.
2. Speedometer: Displays the current speed of
the scooter.
3. ODO: Total distance travelled.
4. TRIP: Single trip distance.
5. Lights indicator light.
6. Level 1 - The display will show ECO
(up to 6 km/h).
7. Level 2 - The display will show D
(up to 20 km/h).
8. Level 3 - The display will show S+
(up to 25 km/h).
9. Cruise Control: Speed control. It is activated
after the same speed has been maintained
for a few seconds. The display emits a short
beep.

19
6. Quick guide
•Priortousingtheitemforthersttime,chargeto100%.
• Check tyre pressure (see side of tyre for recommended value). If the item does not reach
atleast60%ofthedeclaredkms,orthemaximumspeedwithintherst3monthsof
use,itislikelythatthewheelshavedeatedoncemore.Inthiscase,restorepressureas
indicated.
• Check and adjust the brakes.
• Turn on the display.
•Placetheitemonaatsurface.
•Holdthehandlebarrmlyusingbothhands.Stepontothefootrestwithonefootanduse
the other to give yourself a gentle push and accelerate.
CAUTION
Zero Start Function: the throttle is activated once the forward speed exceeds 3 km/h.
For safety reasons, the item is initially set up to avoid standing starts.
• When riding the item, tilt your body in the direction of travel when turning and slowly turn
the handlebar.
• To stop the item, release the throttle, pull the brake lever
•Togetoff,rststoptheitemcompletely.Gettingoffthemovingitemcancauseinjury.
• Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for
recommended value), wheel wear, throttle and charge status of battery.
Brake lever adjustment
eSR2 /eSR2 EVO eSR1
AA
It is possible to adjust the position of the brake
lever, if necessary, by unscrewing the screw (A).
Once the position has been adjusted, tighten the
screw (A).
It is possible to adjust the position of the brake
lever, if necessary, by unscrewing the screw (A).
Once the position has been adjusted, tighten the
screw (A).