Argos 147/7584 User manual

OI WOW Eclipse Mirror Wall Cabinet
147/7584
Issue 1 - 10/10/13
40cm
15cm
50cm

Components - Panels
Please check you have all the panels listed below
12
4
7
Left side panel Right side panel
Door panel Corner piece x 4
8
2
If you have damaged or missing components,
call the Customer Helpline:08456 400800
Back panel
5
3
6
Bottom panel
Top panel Adjustable shelf

Components - Fittings
Please check you have all the fittings listed below
Note:The quantities below are the correct amount to complete the assembly .In some cases more
fittings may be supplied than are required.
D
A
G
J
H
E
B C
F
I
3
35mm Screw x 2Straight hinge x 2
Φ4 x 12mm Screw x 14
Hanger Bracket x 2 Φ3 x 12mm Screw x 10
Wooden Dowel x 16
Wall plug(for solid walls only) x 2
Metal Support x 4
Locking Pin x 8 Locking Nut x 8
Ruler - Use this ruler to help correctly identify the screws
Tools required
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
0 1 2 3 45 6
(medium & large)
Phillips screwdriver Small
hammer
Ruler/tape
measure
Flatblade screwdriver
(medium)
6mm Suitable drill bit
(for use with wall plug)
Eye protection
(when using a
hammer or glue)
Hammer Drill
(Only for dril hole on the wall)

Assembly Instructions
Assembling side panel and door
panel
c:
J
C
C
C
C
C
A
A
J
J
J
J
J
J
4
Step 1
1
2
2
12
d:
Insert wooden dowels into
left & right side panel .
G2
G2
Use Φ4 x 12mm screw to attach
straight hinge onto right side
panel .
A
G2
b:
B
B
8
8 8
88
C
Attach corner pieces to left & right
side panel and insert locking nuts
into side panel,tighten locking
nuts to secure.
d:
7
G1
G1
A
A
Front
G1G2
a:
Loosen straight hinge screw as
shown to separate it into & .
G1
b:
Use Φ4 x 12mm screws to fix
straight hinge onto door panel
．
7
A
G1
B
c:
Screw locking pins into corner
pieces as shown.
8
C
a:
GG1
G2
3
Tips: not make the
hinge in wrong way
A
G2

Assembly Instructions
Step 2
Step 4
Step 3
5
Assembling back panel
Assembling the unit
7
7
7
7
7
3
D
E
A
G
G
G
G
4
4
4
NOTE:It would be useful to ask
someone to help you at this stage.
Assembling door panel
G1 G2
Attach door panel to the unit by
fixing onto as shown ,adjust
the door left or right ,up or down ,in
or out if needed .
G1
G1
G2
G2
J
Insert wooden dowels into top
panel and bottom panel .
Carefully attach side panels
to top panel and bottom panel,
insert locking nuts into top and
bottom panel,tighten locking nuts
to secure.
45
1
2
C
C
C
C
C
J
J
J
J
J
J
J
J
1
2
5
4
D
4
Use Φ3 x 12mm screw to fix
back panel to the unit,please
make sure the bracket hole on back
panel match top panel as shown.
Use Φ4 x 12mm screw to fix
hanger bracket on top panel .
3
4
A
E

A
6
NOTE:If you have damaged or missing components,
call the Customer Helpline:08456 400800
Argos LTD,489-499 Avebury Boulevard,
Central Milton Keynes, MK9 2NW
Assembly Instructions
Step 8
NOTE:It would be useful to ask
someone to help you at this stage.
Fixing to the wall
Step 5
I
I
H
H
F
a:
b:
6
a:
Insert metal support into side
panels,carefully put shelf on it.
6
F
D
D
After above assembly, please
double check and make sure all
screws are tigthened before us.
Warning!
Please make sure the unit is
secured to the wall before use.
D
Use screw and wall plug to
b:
fix the unit on the wall via wall
bracket .
HI
Please refer to next page the Guide
for Wall Mounting & Fixings.

A Guide to - Wall Mounting & Fixings
Revision 2 - 7/10/09
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
a specialist tting in this case. For light
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
For use when tting or supporting
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
plasterboard. The hammer xing allows
it to be xed to the wall rather than the
plasterboard. Always check the xing
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5: Ensure wall plugs are well tted and are a tight t in the
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
using incorrect xings is the
responsibility of the installer.

SAFETY WARNING INFORMATION BS7449 : 1991
Keep these instructions for future use: Catalogue Number: 147/7584(D)
Manufacture date: Oct 22th, 2013
Retailer: Argos
Retailer address: 489-499 Avebury Boulevard
Saxon Gate West
Central Milton Keynes
WARNINGS Bucks, MK9 2NW
*Do not place very hot or very cold items against or in This unit contains glass of a nominal
close proximity to glass surface unless an adequately thickness of 3 mm, which is not required to be
thick insulating material is used to prevent such items classified to BS6206 Class C.
from coming into contact with the glass. If a glass is chipped or broken replace with
glass of the type described on this label. Consult the
*Do not strike the glass with hard or pointed items. manufacturer, retailer, or agent with regard to
obtaining a manufacturing specification and shape for
* Do not sit or stand upon horizontal glass surfaces. replacement glass quoting the model number, and batch
*When cleaning glass panels or mirrors use a damp number or date of manufacture.
or leather with washing up liquid or soft soap if necessar
y
do not use washing powders or any other substance
containing abrasive since these substances scratch glass.
*It is essentail that this unit is fixed to a wall with the fixings provided.