Argos 390/9665 User manual

10 Tier Rolling Shoe Rack
390/9665
Assembly Instructions - Please keep for future reference
Dimensions
Width - 73cm
Depth - 22.5cm
Height - 163.5cm
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800
Issue 2 - 27/08/14

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
the following pages.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product,
this could cause damage.
• Assemble the item as close
to its fi nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts
• Regularly check and ensure
that all bolts and fittings are
tightend properly.
Handy Hints

Components - Parts
Please check you have all the fittings listed below
18 mm Screw x 40
A
2
Components - Fittings
Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
If you have damaged or missing components,
call the Customer Helpline: 03456 400800
Lower Side Frame x 2
1
710 mm Black Coated Steel Tube x 20
3
Upper Side Frame x 2
2
694 mm Black Coated Steel Tube x 2
4
Tools required
Screwdriver
28 mm Screw x 4
B
Plastic Insert x 4
C
Regular Castor x 2
D
Castor with stopper x 2
E

Assembly Instructions
Step 1
Connect 710 mm
Black Coated Steel Tube
with Upper Side
Frame using Screw.
Connect 694 mm
Black Coated Steel Tube
with Upper Side
Frame using 28mm
Screw.
See fig 1.
Now finished the upper
part of shoe rack.
Step 2
Repeat above processes
for the lower part of shoe
rack.
3
3
2
Connect 694 mm
Black Coated Steel Tube
with Lower Side
Frame.
See Fig 2.
Insert Plastic Insert to
Lower Side Fram and
insert Regular
Castors and Castors
with Stoppers
respectively.
D
1
3
A
4
2
4
B
2
A
A
A
A
A
3
3
3
3
3
3
A
A
A
A
A
B
E
1
1
A
A
A
A
A
B
B
4
3
3
3
3
3
C
C
E
B
A
A
A
A
C
D
C
E
4
2
B
fig 1.
fig 2.
4
1

Assembly Instructions
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800
Step 3
Connect the uppper part
of shoe rack with lower
part of shoe rack
together.
Note: It would be useful
to ask someone to help
you at this stage.
Assembly is complete.