Argos SWIVEL User manual

1
2
34
5
1 - 2
1. We suggest you spend a short time reading through this
leaflet and follow the simple step-by-step assembly
instructions.
2. Do not discard any of the packaging until you have
checked that you have all the parts and the pack of
fittings.
3. Assemble this product on a flat surface.
4. Assemble all parts loosely before tightening any bolts.
5. Discard all extra fittings and keep fittings out of reach of
children.
6. To clean, wipe clean with a soft dry cloth.
7. Retain Assembly Instructions for future reference.
WOW SWIVEL HEAD BARSTOOL
ASSEMBLY INSTRUCTIONS
Before you start, here is some helpful advice:
CODE DESCRIPTION QTY.
1
2
3
SEAT
SWIVEL PLATE
UPPER LEG
1
1
1
a4SHORT BOLT
CODE DESCRIPTION QTY.
5
dNUT
1
cMEDIUM BOLT
LONG BOLT
b8
4LOWER LEG 1
5STRETCHER 1
8
eWASHER
1
fSPANNER
1
gALLEN KEY
PARTS LIST
FITTINGS LIST
APPROXIMATE TIME OF ASSEMBLY: 30 MINUTES

1x
4
c
3d
4
3
5
0220090319
2
34
2
1
2 - 2
3
1 2
x4
b
x4
d
x1
d
x4
e
b
d
2
4
e
4x
1
2
a
e
4x
x4
b
3
b
5
4x
x4
a
x1
c
x4
e
Periodically check and
ensure that all bolts
are fully tightened.
NOTE:

Important - Please read these instructions fully before starting assembly
1
Dimensions
Width - 47cm
Depth - 47cm
Height - 85cm
Assembly Instructions - Please keep for future reference
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
• We suggest you spend a short
time reading through this leaflet
and follow the simple step by
step assembly instructions.
• Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fittings.
• Assemble this product on a
flat surface.
• Assemble all parts loosely
before tightening any bolts.
• Discard all extra fittings and
keep fittings out of reach of
children.
• Maximum safe weight of user:
110kgs.
• Unit weight: 4.5kgs.
• Retain Assembly Instructions
for furture reference.
• We do not
recommend the use
of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
Swivel Barstool
Assembly Instructions - Please keep for future reference 600/1742
Warnings
• Do not stand on the stool.
• Do not use the stool as a step
ladder.
• Do not sit with sharp objects in
back pockets as this may
damage the seat surface.
• Do not knock the surface of
the seat against sharp solid
surfaces.
Care and maintenance
• Please clean the seat surface
using either damp (not wet)
cloth and a mild domestic soap
solution or by using an
appropriate polish.
• Do not use any abrasive
materials when cleaning.
• From time to time check that
there are no loose bolts on
this unit.
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 2 - 31/05/13
194801
194801

2 3
Components - Parts
Please check you have all the parts listed below Please check you have all the fittings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
1Seat
(41.5 x 10 x 35cm)
2Swivel plate
(16 x 16 x 2cm)
5Stretcher
(Ø1.9 x 35 x 35cm)
3Upper leg
(Ø2.2 x 72 x 47cm)
4Lower leg
(Ø2.2 x 72 x 47cm)
A
M6 x 30mm Bolt x 8
105 150 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Ruler - Use this ruler to help correctly identify the screws
C
M6 x 18mm Bolt x 4
D
Nut x 5
F
Spanner x 1
B
M6 x 22mm Bolt x 1
G
Allen key x 1
E
Washer x 8
Components - Fittings If you have damaged or missing components,
call the Customer Helpline: 08456 400800

4 5
Place the seat on a
flat protected surface.
Position the swivel plate
on the seat as
shown. Align the holes
and fix together using
bolts and washers .
Tighten bolts using allen
key .
Assembly Instructions
Step 1
Step 2
Attaching legs
Attaching stretcher
Position the stretcher
between the legs as
shown. Align the holes
and fix together using
bolts . Tighten bolts
using allen key while
making adjustments to
ensure the legs are even
on the floor.
Assembly Instructions
Step 3
Step 4
Attaching swivel plate
Position the upper leg
and lower leg as
shown. Align the holes
and fix together using
bolt & nut .
Aligning the seat
Position the swivel plate
on the legs as shown.
Align the holes and fix
together using bolts &
washer & nut .
Tighten bolts using allen
key and spanner .
Important:
Do not tighten
the bolt at this
stage.
B
B
B
A
A
A
A
A
A
G
D
D
D
D
5
3
3
5
5
2
2
4
4
4
33
1
12
1
1
3
4
B
A
A
E
E
E
E
A
E
A
E
Important:
After tightening
bolts at this
stage, tighten
bolt with nut
using allen key
and spanner .
Important:
Carefully turn
over the
assembled unit
and place on a
flat surface.
A
B D
G
F
D
DD
D
DD
G
F
A
E
A
E2
2
2
3
4
4
C
C
E
C
E
C
E
C
E
C
G
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Assembly is complete.