ART+SOUND CLMN8 User manual

CLMN8
OPERATIONS
MANUAL
WARRANTY CONDITIONS
2 years of warranty from the manufacturing date.
The warranty is limited to repair or exchange of the
defective material insofar this is a consequence of
normal use and the device has not been damaged.
ArtSound is not responsible for any other costs
deriving from the defect (e.g. transport). For any
details, we refer to the general conditions of sale.
TECHNICAL SPECIFICATIONS
• range : <60m2
• 2-way/broadband system 8+1
• driver, neodymium-magnet :
2” polypropylene cone
• tweeter, neodymium-magnet : 1” soft dome
• magnetic shielded
• max. power (100V) : 6 -15-30 W
• max. power (8Ω) : 40-180 W
• sensibility : 91dB
• frequency range : 120Hz - 20kHz
• dimensions (h x w x d) : 578 x 70 x 75mm
• weight / piece : 2.23 kg
• housing : aluminium
• black / white
• suspension : multi-directional bracket
Dear customer, thank you and congratulations on
the purchase of your speakers(s). If you read the
following instructions and keep them, you will be
able to enjoy them for a long time!
SAFETY INSTRUCTIONS
• A CLMN8 cannot swim. Please keep it away
from water and all types of moisture.
• Ensure that your amplifier is disconnected while
connecting your speaker(s).
• Power cables and audio cables had best be
kept away from the speaker cables as much as
possible.
• Ensure that your amplifier is disconnected while
connecting your speaker(s).
• Ensure that the total capacity of all speakers is
lower than that of the amp.
• Assemble the CLMN8 only using the included
bracket and fitting screws.
• People only have one set of ears, treat them
carefully. Prolonged exposure to a high volume
may cause damage.
• When in doubt about the positioning or the use
of the speakers, ask help from an audio expert
in advance.
3 x
4 x
INSTALLATION
AB
C
34 mm
34 mm
50 mm
92 mm
6 mm
1 2
A
A
A
B B
1- Deduplicate the bracket. 2- Assemble part A of the bracket to the wall by
use of screws.
3
CB
3- Assemble part B of the bracket to the speaker
(C) using the included screws.
4- Connect the speaker cable [+/-] via the
connecting terminal and select the desired
capacity (in a 100 V environment or 8 Ohm in
case of residential use).
+
-
ROOD
ROUGE
RED
ZWART
NOIR
BLACK
30W
15W
6W
0
8Ω
4

Kwww.artsound.be
EArtsound.audio
Qartsoundaudio
House of Music nv
Ronse, Belgium
¼+32 9 380 81 80
º [email protected]
7- Extended speaker position
Untighten both screws, position the speaker
and fixate it.
5- Turn speaker to left or right
Untighten the screw at the bottom, turn the
speaker and fixate it.
6- Aligning the speaker vertically
Untighten the screw, direct the speaker and
fixate it.
7
56C
YOU ARE ABOUT TO ENJOY IT!