ART+SOUND LIGHTBALL User manual

LIGHTBALL
Dear Customer, Congratulations on the purchase of
your loudspeaker(s). Please read these instructions
carefully and keep them tor future reference.
SAFETY PRECAUTIONS
• Read all the instructions carefully before using.
• Check that the voltage marked on the rating label
matches your mains voltage.
• The speaker should not be taken apart or modified.
• Do not place the speaker in constant sunlight or
near naked flames such as wood stoves, lit can-
dles, etc.
• Never subject the speaker to high temperatures,
damp or dusty environments, heavy vibrations or
impacts.
• Protect your hearing. Listening on high volume for
prolonged periods can lead to permanent hearing
loss.
• The speaker must only be repaired by qualified
service technicians,
• This speaker is splash proof. Do not submerge
under water, doing so will result in permanent
damage.
• Do not expose the speaker to water while charging.
Accessories
• 1 x Bluetooth speaker
• 1 x Micro USB-cable
• 1x remote control
• 1 x User manual
Compatibility
This product is compatible with Bluetooth enabled
mobile phones and devices.
Charge
1. Connect speaker with PC/Laptop/Mac or any 5V
USB adaptor (not included) by the USB cable
included.
2. Red LED turns ON during charging, turns OFF
after fully charged.
3. Unplug USB cable after fully charged.
4. Red LED twinkles when low power (<21%), with
a warning sound.
CONTROL VIA THE
BLUETOOTH SPEAKER.
Turning ON/OFF :
1. Hold the power button for approx. 2 seconds to
turn on, you would hear a starting chime.
2. Hold it again for approx. 2 seconds to turn off.
Pairing
1. Turn on the speaker to be ready for pairing. After
3-4 seconds, you would hear a chimed Blue-
tooth sound.
2. Activate the Bluetooth function on your mobile
phone or any Bluetooth devices, search the
speaker and select the name “Lightball”, and
connect the speaker with the device via Blue-
tooth pairing
3. The Bluetooth sound is chimed once more after
paired.
ׁNote:
1. Keep the range of 1 meter when pairing. If the
pairing was not successful, turn off the speaker
and re-pair again.
2. After successful pairing, paired devices will re-
member each other so there is no need to pair
again unless pairing information is deleted.
3. To pair with a new device, follow steps 1-3
above after disconnected from existing device.
AUX connection
Connect the AUX cable (not included) to the AUX
jack.
Insert the other end of the cable into the headphone
or LINEOUT jack of the external device.
Volume +/- and Previous / Next
1. Short press the Volume +/- buttons to increase/
decrease volume.
2. Long press the Volume +/- buttons to go to Next
or Previous track.
3. There is prompt music when volume is at max
or min.
TWS (True Wireless Stereo) Function:
to pair one mobile phone with 2 speak-
ers together
1. Make sure you have 2 LIGHTBALL speakers at
your hand, turn on both speakers together, then
quickly double click “Power” button s of both
speakers, both speakers will into pairing mode
to pair with each other first.
2. Wait for around 5-10 seconds until two speak-
ers “beep” once in sequence, which means both
speakers paired with each other already.
3. Then, activate Bluetooth function of your de-
vice and pair with Bluetooth name Lightball.
You would enjoy music in True Wireless Stereo
sound from two speakers simultaneously.
ׁWarm notes:
• You can only enjoy TWS function when you have
2 Lightball speakers.
• If you want to disconnect existing TWS con-
nection, double click “Power” button of either
speaker, the sub-speaker will disconnect, the host
speaker will keep playing music.
• If you want to establish TWS connection with
2nd speaker after your device connected with one
speaker already, please long press” power “button
to disconnect from your existing paired device,
then follow above steps 1-3.
OPERATIONS
MANUAL
Bluetooth speaker
5 - ArtSound
AUX INUSB PLAYER
USB
CHARGE
1: Power on/off 2: USB charge port
3:USB player 4: AUX Port

LIGHTBALL
CONTROL VIA REMOTE CONTROL
ׁNOTE: Please remove the plastic tab from the
battery cover before use.
1. Stand by button: After powering on the
speaker (by pressing the power button on the
underside of the speaker), short press this but-
ton to turn off the light and Bluetooth. Short
press again to turn on the light and Bluetooth.
2. Bluetooth function: press this button to
switch into Bluetooth mode.
3. AUX function: press this button to switch
into AUX mode.
4. USB function: press this button to switch
into USB mode.
5. Previous button: When the Bluetooth is con-
nected, and the music is on, press this button to
select the previous track.
6. Next button: When the Bluetooth is connect-
ed, and the music is on, press this button to se-
lect the next track.
7. Pause and play:When the Bluetooth is con-
nected, and the music is on, press this button to
play or pause the music.
8. Voice - and +: When the Bluetooth is
connected, and the music is on, press the “-”
to reduce the volume, press “+” to increase the
volume.
9. Light ON/OFF button: Press this button to
switch the light on and off.
10. Brightness intensity: Change the bright-
ness when the light is fixed on one single colour.
11. Color selection button: When the light is
on, press this button to choose your favourite
color (6 colors to choose from).
12. Color selection button: when the light is on,
press this button to select the next color. (7
colors to choose from).
13. Music flash button: The light will flash when
the music is playing.
14. Smooth button: 7 colors are scrolling auto-
matically.
15. White color button: Press this button and the
speaker will display a White color.
ׁWarm notes :
• Above operations and sequence based on factory
default setting.
• Speaker memorizes previous lighting status be-
fore turn-off, when you turn it on again, it will
display the same lighting mode/color/brightness.
Technical specifications
• range : <20 m2
• system : Full drive
• woofer : 2.5” polypropylene cone
• mood lighting :
- adjustable intensity: off/20%/50%/100%
- colours: white, purple, green, marine-blue,
light-green, sky blue, pink
- satus: one colour/waving/dancing to music
• battery : 2,200 mA (8 hours)
• amp power RMS : 5 Watt
• amp power max : 20 Watt
• frequency range : 80Hz-20KHz
• Aux-in : 3.5mm jack
• wireless : Bluetooth 5.0
• connections : Stereo Bluetooth/TWS, USB, USB
(charging) (Type A), 5 V/1 A
• 0.8 kg /piece
• composition : plastic + PU-leather
• colour : White
• dim. (wxdxh) : 20 x 20 x 16.3 mm
• extra : remote control, USB-cable
Kwww.artsound.be
EArtsound.audio
Qartsoundaudio
House of Music nv
Ronse, Belgium
¼+32 9 380 81 80
º [email protected]
Warranty conditions
2 year warranty from the date of manufacture.
The warranty is limited to the repair of replacement
of the detective material insofar as this defect is a
resu Il of normal use and the device has not been
damaged. Artsound is not responsible lor any other
casts that ensue as a result of the defect (e.g. trans-
port). For details, please consult our general terms
and conditions of sale.
Waste electrical products should not be
disposed of with household waste. All
electronic products with the WEEE logo must be
collected and sent to approved operators for safe
disposal or recycling. Please recycle where facilities
exist. Many electrical/electronic equipment retailers
facilitate "Distributor Take-Back scheme" of house-
hold WEEE. Check with your Local Authority or
retailers for Designated Collection Facilities (DCF)
where consumers may dispose of their WEEE free
of charge.”