Asoni CAM662H User manual

5M-IR 720P HD H.264
CMOS Network Fixed Dome Camera
CAM662H
User’s Manual
Date: 10/10/2012
Firmware Version: VB1.0.28

1
Content
Content .......................................................................................................................................1
1. Preface.................................................................................................................................3
2. Product Specifications.......................................................................................................3
3. Product Installation ............................................................................................................5
A. Hardware Installation......................................................................................................5
Cable Connections................................................................................................................5
B. Monitor Setting................................................................................................................6
C. IP Assignment..................................................................................................................7
4. Live Video............................................................................................................................9
5. Configuration ....................................................................................................................13
A. System ...........................................................................................................................13
System Information.............................................................................................................13
User Management..............................................................................................................17
System Upgrade.................................................................................................................19
System Logs.......................................................................................................................20
B. Video/Audio Setting ......................................................................................................21
Video Format ......................................................................................................................21
Image Setting......................................................................................................................26
C. Network Setting.............................................................................................................28
Network Setting ..................................................................................................................28
Mail / FTP / Samba Setting.................................................................................................33
PPPoE / DDNS Setting.......................................................................................................37
D. Network (Advance) Setting...........................................................................................40
HTTPS Setting....................................................................................................................40
SNMP Setting .....................................................................................................................42
IP Filter Setting ...................................................................................................................44
QoS/ DSCP Setting.............................................................................................................46
IEEE 802.1x Setting............................................................................................................47
E. Event Handling..............................................................................................................48
Event Setting ......................................................................................................................48
Schedule.............................................................................................................................54

2
Micro-SD Card....................................................................................................................56
6. Network Configuration.....................................................................................................59
A. Intranet Only..................................................................................................................59
Connects to PC Directly......................................................................................................59
Connects to an Exist LAN...................................................................................................60
B. Internet Only..................................................................................................................61
Connects to ADSL with Fixed Public IPAddress.................................................................61
Connects to ADSL with Floating Public IPAddress (PPPoE)..............................................62
C. Intranet + Internet..........................................................................................................64
Connects to Internet with Fixed Public IPAddress..............................................................64
Connects to Internet with Floating Public IPAddress..........................................................66
7. Factory Default..................................................................................................................67
Compatible List of SD Card.....................................................................................................68

3
1. Preface
This camera is a 720P HD CMOS network camera which builds in web server. User views
real-time video via IE browser. It supports H.264, MJPEG and MPEG4 video compression
which provides smooth and high quality video. The event video can be stored in the
Micro-SD card, and can be playback remotely.
The IR model equips infrared illuminator to provide good image quality, even in darkness.
This camera is an easy-to-use IP camera which is designed for security application.
2. Product Specifications
Onvif compliance
Mega-Pixel CMOS Sensor
H.264 / MJPEG / MPEG4 compression formats and triple streaming
Supports resolution up to 1280x800, 720P@30FPS real time
Self-Contained HTTP Web Server providing Internet capability for remote access
Day & Night functionality for 24-hours surveillance, auto activate IR illuminator in low
illumination
Infrared radiant distance up to 5 meters
Day&Night Switch time control manually
Supports Micro-SD card for local event recording
Online firmware upgrade
Hardware
CPU / RAM / ROM ARM 9, 32 bit RISC / 128MB / 16MB
Image Sensor 1/4” Mega-Pixel CMOS
Lens Fixed 4.2mm, F1.6
IR Distance 5 Meters
IR LED Built-in 7 IR LEDs
Illumination Normal: 1 lux IR On: 0 lux
Power Supply DC 12V, 1A
Power Consumption Max. 4 Watt
Dimensions Φ110 x H90 mm
Network

4
Ethernet 10/ 100 Base-T
Network Protocol IPv4/IPv6, HTTP, HTTPS, TCP/IP, RTP/RTSP, UDP, 3GPP, SMTP, FTP,
Samba, PPPoE, DHCP, DDNS, NTP, UPnP, SNMP, QoS/DSCP, IP Filter,
IEEE 802.1x, Bonjour
Onvif Compliance Yes, compliance with Onvif V2.10, 1.02 and 1.01
System
Video Resolution 1280x800, 1280x720, 640x480, 320x240, 176x144
Compression Format H.264 / MJPEG / MPEG4
Frame Rate Up to 30FPS
Triple Streaming Yes (2 for live view, 1 for 3GPP)
3GPP Yes, Live view with 3G mobile phone
Video Bitrate Adjustment CBR, VBR
Video Adjustment Brightness, Contrast, Hue, Saturation, Sharpness, Gain control, Shutter time,
Sense Up, Digital WDR, Digital Noise Reduction, Day/Night color mode,
Video orientation
Image Snapshot Yes
Privacy Mask Yes, 3 different areas
Motion Detection Yes, 3 different areas
Event Trigger Motion Detection
Triggered Action Send Email, Send to FTP, Save to SD Card, Save to Samba HDD
Pre/ Post Alarm Yes, configurable
Security Password protection, IP address filtering, HTTPS encrypted data
transmission, IEEE 802.1x port-based authentication, QoS/DSCP
Firmware Upgrade HTTP mode, can be upgraded remotely
Connection Up to 10 clients simultaneously
SD card management
Recording Trigger Motion Detection, IP Check, Network Disconnect
Schedule Snapshot with schedule
Video Format Video (AVI), Snapshot (JPEG)
Video Playback Yes
Web browsing requirement
OS Windows 2000, XP, Vista, Windows 7
Web Browser Microsoft IE V7.0 (32-bit) or above, Mozilla Firefox V6.0 or above, Opera
V11.5 or above, Safari V5.1 or above, Google Chrome V13.0 or above
Suggested Hardware Intel Core 2 Duo 2.53GHz, RAM: 1GB
Graphic card: 128MB onboard RAM
* Specifications are subject to change without notice

5
3. Product Installation
A. Hardware Installation
Cable Connections
Power Jack:
To connect the DC 12V power adapter.
Network Connector:
The RJ-45 connector allows connect to the Ethernet network.
Micro-SD Card Slot
(inside of the camera):
Insert a Micro-SD card if you want to do the event recording in
the camera.
1. Connect Ethernet cable for network connection.
2. Connect power adapter to turn on the camera.
3. Set up the network configurations according to the network environment. For further
explanation, please refer to Network Configuration chapter.


Power Jack
Network Connector

Micro
-SD Card Slot (Inside of camera)

6
B. Monitor Setting
1. Right-Click on the desktop. Select “Properties”
2. Change color quality to “Highest (32bit)”.

7
C. IP Assignment
Always consult your network administrator before assigning an IP address to your
camera in order to avoid using a previously assigned IP address.
MAC Address: Each network camera has a unique Ethernet address (MAC address)
shown on the sticker of the device.
One final note, although the IP Search is able to find and configure any network
device on the LAN except those that are behind a router, it is a good idea to set the
host PC to the same subnet. In order to connect to the Web-based user interface of
the network camera, the host PC must be in the same subnet. For more information
about subnets, please consult your network administrator.
“Asoni IP Search” is a utility that provides an easier, more efficient way to configure the IP
address and network settings of the network camera in Local Network (LAN).
The software can be installed from the attached software CD.
1. Once “Asoni IP Search” has been successfully installed on the computer, double
click the “Search CAM4_CAM6_NVR6LX” icon on the desktop.






8
2. IP Search searches all the network devices which connect to the intranet and lists
on the window. Click [Search] button to search again.
3. From the list, click and select the device with the MACAddress that corresponds to
the device that is to be configured.
4. The network configuration of the selected device will show on the bottom, filling in
the Device Name, IPAddress, Subnet Mask, Gateway and the others.
5. Click [Modify]button to save the settings into the device.
6. Wait for few seconds to let the device update the settings, and then click [Search]
button again to re-search the network devices.
7. Double-click the network device listed on the window, It will open an IE browser and
connect to this device directly.

9
4. Live Video
Start the IE browser, type the IP address of the
network camera in the address field:
http://<IP of camera>
If the “HTTP Port” has been changed from “80”,
type the URL as:
http://<IP of camera>:<HTTP Port>
After link to the camera, it will show a dialogue
box. Key-in the user name and password to
log-in and open the web page of camera.
The default user name and password are “admin” and “admin”.
For the first time to view the camera video via IE, it will ask you to install the ActiveX
component.
If the installation failed, please check the security setting for the IE browser.
1. In IE, click on [Tools] [Internet Options…]
2. Click on [Security] Tab [Custom Level…]
3. In Security Settings, under [Download unsigned ActiveX controls], select
“Enable” or “Prompt”.
4. In Security Settings, under [Initialize and script ActiveX controls not marked as
safe], select “Enable” or “Prompt”.
5. When pop-up window with warning message, click [Yes] to save the settings.