Assa Abloy Corbin Russwin PED4000 Series User manual

Installation Instructions
WARNING
This product can expose you to
lead which is known to the state of
California to cause cancer and birth
defects or other reproductive harm.
For more information go to www.
P65warnings.ca.gov.
Attention Installer: Improper
installation may result in damage
to the product and void the factory
warranty.
WARNING
Cylinder Dogging
PED4000/PED5000 Series Exit Devices
FM611 01/23
For installation assistance contact Corbin Russwin
1-800-543-3658 • [e-mail]
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Cylinder
Insert
Hex Key Dogging Scalp Blank Scalp
Cylinder Insert View
Cylinder nut

2
Cylinder Dogging
Installation Instructions
PED4000 / PED5000 Series Exit Devices
FM611 01/23
For installation assistance contact Corbin Russwin
1-800-543-3658 • [e-mail]
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
1
Remove rail mount.
2
Remove four #6 screws to remove dogging slope assembly.
Dogging slope assembly
Dogging spring
Dogging cam
#6 Screws

3
Cylinder Dogging
Installation Instructions
PED4000 / PED5000 Series Exit Devices
FM611 01/23
For installation assistance contact Corbin Russwin
1-800-543-3658 • [e-mail]
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
56
34
Remove two #4 screws.
Install the new scalp.
Rotate and extract scalp.
Install two #4 screws.
Dogging
slope
Blank
Scalp
#4
Screws
Dogging slope
Scalp
#4
Screws

4
Cylinder Dogging
Installation Instructions
PED4000 / PED5000 Series Exit Devices
FM611 01/23
For installation assistance contact Corbin Russwin
1-800-543-3658 • [e-mail]
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Place dogging cam in carrier hole.
8
7
Place dogging spring outside of dogging slope.
Insert both on the carrier. Install four #6 screws.
Dogging cam
Carrier
Dogging slope
Dogging spring
#6 Screws
Carrier

5
Cylinder Dogging
Installation Instructions
PED4000 / PED5000 Series Exit Devices
FM611 01/23
For installation assistance contact Corbin Russwin
1-800-543-3658 • [e-mail]
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
11
B
A
A
B
910
12
Slide carrier into rail mount. Slide dogging insert into rail mount.
Test the function by (A) compressing the bar, and (B)
turning the key clockwise to engage dogging. The bar
should stay compressed.
Test the function by (A) turning the key counter-
clockwise to release dogging. (B) The bar should
return to the uncompressed position on its own.
Rail mount
Carrier Dogging Insert

6
Cylinder Dogging
Installation Instructions
PED4000 / PED5000 Series Exit Devices
FM611 01/23
For installation assistance contact Corbin Russwin
1-800-543-3658 • [e-mail]
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

7
Cylinder Dogging
Installation Instructions
PED4000 / PED5000 Series Exit Devices
FM611 01/23
For installation assistance contact Corbin Russwin
1-800-543-3658 • [e-mail]
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.

FM611 01/23
For installation assistance contact Corbin Russwin
1-800-543-3658 • [e-mail]
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.