Atos Medical CareTips Provox LaryButton Operating instructions

Hospital
Department
Clinician
Contact information
This text does not replace nor does it set forth the complete contents of the User Manual and/or Prescriber Information for the products in this
text, and is not a substitute for reviewing and understanding that important information. Therefore, before prescribing and/or using any of the
products included in this text, please review the entire contents of the respective User Manual and/or Prescriber Information.
For more information contact us at: info[email protected] • www.atosmedical.us • 1.800.217.0025
The Provox LaryButton sits inside the stoma by itself and prevents
the tracheostoma from shrinking. It is used to hold the Provox
HME’s, Provox ShowerAid and the Provox FreeHands HME®.
1. Sizing of the Provox LaryButton:
• Your ability to use the LaryButton depends on the size and shape of your
stoma. It should t well into your stoma without causing irritation.
Your clinician needs to size you using a Provox LaryButton Sizing Kit.
2. Inserting the Provox LaryButton:
• Lightly lubricate the small end of the LaryButton that ts into your
stoma. Use only a water soluble lubricant.
• Fold the narrow end of the LaryButton in half with your ngers or
hemostat and hold it rmly folded.
• Insert the narrow end into your tracheostoma and release your ngers.
• Gently tug on the LaryButton tabs to insure the LaryButton is seated in
the correct position.
• Conrm that the LaryButton is in the correct position and is not
pushing on the voice prosthesis.
• e LaryButton can be secured with the Provox LaryClip™ or
a Provox TubeHolder.
• Insert a Provox Heat and Moisture Exchanger (HME) or Provox
FreeHands HME into the opening of the LaryButton.
• Determine the wear schedule with your clinician.
Provox® LaryButton™
When and How to Use
TIP: A wear schedule will gradually build up tolerance to the
Provox LaryButton preventing stomal irritation.

Hospital
Department
Clinician
Contact information
This text does not replace nor does it set forth the complete contents of the User Manual and/or Prescriber Information for the products in this
text, and is not a substitute for reviewing and understanding that important information. Therefore, before prescribing and/or using any of the
products included in this text, please review the entire contents of the respective User Manual and/or Prescriber Information.
For more information contact us at: info[email protected] • www.atosmedical.us • 1.800.217.0025
3. Removing the Provox HME from the Provox LaryButton:
• Hold Provox LaryButton in place with one hand.
• Hold the Provox HME and gently remove the HME cassette while keeping
LaryButton in place.
4. Removing the Provox LaryButton:
• Hold the Provox LaryButton by the sides and gently squeeze to allow the
narrow end to collapse.
• Remove the LaryButton by tilting it out of the tracheostoma.
5. Cleaning the LaryButton:
• Rinse with tap water and clean with the Provox TubeBrush.
©Atos MedicalAB, Sweden. 201107 MC0691-ThUS.
Provox® LaryButton™
When and How to Use
Provox® ShowerAid™, Provox® LaryClip™ and Provox® LaryButton™ are trademarks owned by Atos Medical AB, Sweden. Provox® and Provox®
FreeHands HME® are registered trademarks owned by Atos Medical AB, Sweden. Provox® HME, Provox® FreeHands HME® and Provox LaryClip
are protected by patents, patents pending and design patents and design patents pending.
MC0691