AXIOMTEK eBOX560-512-FL User manual

©Copyright 2017 Axiomtek Co., Ltd.
Version A1 October 2017
Printed in aiwan
9416K560030E
4
Installing the SO-DIMM Memory
Step 1 Turn off the system, and unplug the power adaptor.
Step 2 Turn the system upside down to locate screws at the right
side as red marked and loosen two screws.
Step 3 Remove the bottom cover and HDD bracket.
Step 4 Locate the memory module, insert a gold colored contact into
the socket and push the module two end latches till locked
and then put the HDD bracket and bottom cover back.
Note: Please refer to the user’s manual to get more detail information.
eBOX560-512-FL Quick Installation Guide
©Copyright 2017 Axiomtek Co., Ltd.
Version A1 October 2017
Printed in aiwan
9416K560030E
1
Packing List
System Unit x 1 DVD/CD x 1 (for Driver & Manual)
Quick Installation Guide x 1 12VDC / 60W AC to DCAdapter x 1
Screws Pack x 1 Foot Pad x 4
EU Power cord x 1 or US Power
cord x 1
 Do not try to apply power to the system if any damaged components.
Dimensions
eBOX560-512-FL Series Em edded System

©Copyright 2017 Axiomtek Co., Ltd.
Version A1 October 2017
Printed in aiwan
9416K560030E
2
I/O Outlets
The following figures show you I/O outlets on front and rear panels of the
eBOX560-512-FL Series.
Front View
Rear View
© Copyright 2017 Axiomtek Co., Ltd.
Version A1 October 2017
Printed in aiwan
9416K560030E
3
Installing the Hard Disk Drive
Step 1 Turn off the system, and unplug the power adaptor.
Step 2 Locate screws at the right side, loosen the two screws.
Step 3 Pull out the HDD drive bay bracket.
Step 4 Please prepare the following items to assemble HDD.
Step 5 Connected the SSD directly and make sure the insertion is
complete and fasten two screws.
【Note】: Please notice the direction of connector for HDD.