AXIOMTEK eBOX560-500-FL Series User manual

©Copyright 2016Axiomtek Co., Ltd.
VersionA1August 2016
Printed in Taiwan
9416K560020E
4
Installing the SO-DIMM Memory
Step 1 Turn off the system, and unplug the power adaptor.
Step 2 Turn the system upside down to locate screws at the bottom,
loosen screws.
Step 3 Remove the bottom cover and HDD bracket.
Step 4 Please find the DRAM position then insert memory carefully.
Step 5 Finally, fasten the HDD bracket and bottom cover to complete
installation.
Note: Please refer to the user’s manual to get more detail information.

eBOX560-500-FL Quick Installation Guide
©Copyright 2016Axiomtek Co., Ltd.
VersionA1August 2016
Printed in Taiwan
9416K560020E
1
Packing List
System Unit x 1 DVD/CD x 1 (for Driver & Manual)
Quick Installation Guide x 1 Optional Wall-mount kit
Screws Pack x 1 Optional Din-rail & VESAkit
Optional SSD/HDD Optional DRAM
Optional mSATA Optional Mini Card Modules
Do not try to apply power to the system if any damaged components.
Dimensions
eBOX560-500-FL Series Embedded System

©Copyright 2016Axiomtek Co., Ltd.
VersionA1August 2016
Printed in Taiwan
9416K560020E
2
I/O Outlets
The following figures show you I/O outlets on front and rear panels of the
eBOX560-500-FL Series.
Front View
Rear View
©Copyright 2016Axiomtek Co., Ltd.
VersionA1August 2016
Printed in Taiwan
9416K560020E
3
Installing the Hard Disk Drive
Step 1 Turn off the system, and unplug the power adaptor.
Step 2 Turn the system upside down to locate screws at the bottom,
loosen screws.
Step 3 Remove the bottom cover.
Step 4 Please find the HDD bracket location then loosen four screws
of HDD bracket to take out it.
Step 5 Please prepare the following procedure to assemble HDD.
Step 6 Lock the HDD and fasten screws then connect SATA & Power
cables.
Step 7 Please fasten screws of HDD bracket to complete installation.