AXIOMTEK tBOX510-518-FL-24-110MRDC User manual

4 © Copyright 2020 Axiomtek Co., Ltd.
Version A1 July 2020
Printed in aiwan
Installing the Solid-State Disk and CFast Card
Step 1 Turn off the system.
Step 2 Loosen the screws as shown below, and pull out the SSD
tray from the system. Be sure to unplug the internal power
cable before pulling it out.
Step 3 Fasten the SSD screws (marked by the red arrows below)
to fix the SSD. Then screw the SSD firmly to the tray
(marked by the yellow circles) and install the tray back to
the system.
Step 4 Loosen the screws to open the CFast door and install the
SIM and CFast card, as illustrated below. Then screw the
CFast door back to the system.
tBOX510-518-FL-24-110MRDC
Quick Installation Guid
© Copyright 2020 Axiomtek Co., Ltd. 1
Version A1 July 2020
Printed in aiwan
Packing List
Standard Optional accessories
tBOX510-518-FL-24-110MRDC
s
ystem
u
nit
x
1
SATA drive (HDD or SSD)

Terminal
b
lock
(6x2
pin) x 1

CFast
d
rive
Screws pack x 1
Wall mount bracket kit x 1
Wi-Fi / Bluetooth module
Communication (3G/4G/GPS…etc)
m
odule
s
SATA tray x 1

D
RAM
thermal pad x 1
Din-Rail kit

Anti
-
v
ibration
k
it

M12 LAN
c
able

M12
p
ower
c
able

M12 USB cable
Note: Please contact your local distributor if any of the above-mentioned
items is missing or damaged. DO NOT apply power to the board if there
is any damaged component.
tBOX510-518-FL-24-110MRDC Emb dd d Syst m

2 © Copyright 2020 Axiomtek Co., Ltd.
Version A1 July 2020
Printed in aiwan
Dimensions
© Copyright 2020 Axiomtek Co., Ltd. 3
Version A1 July 2020
Printed in aiwan
Installing the Memory & Wireless Module
Step 1 Turn off the system.
Step 2 Loosen all cover screws and remove the cover from
the system.
Step 3 Put the thermal pad on the SO-DIMM socket. Then insert
the module’s gold finger into the socket and push the
module down to complete memory installation.
Step 4 Insert the Mini PCIe card into the socket and fasten
screws. (Note: the Mini PCIe card with SIM functions
should be inserted into Socket1)
Step 5 Put the cover back onto the system, and fasten all screws
tightly to close the chassis.