Baldan SPDE CXP User manual

SPDE CXP  1
Instruction Manual
No Till Seed Drill Special
SPDE CXP

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP  3
Instruction Manual
INTRODUCTION
We appreciate your purchase and congratulate you for the excellent choice you just made
because you have purchased a product manufactured with technology from BALDAN
IMPLEMENTOS AGRÍCOLAS S/A.
This instruction manual will guide you through the procedures that are necessary since
its acquisition up to the operating procedures of use, security and maintenance.
BALDAN ensures that has delivered this farming implement to the dealer in perfect conditions.
The dealer is responsible for the custody and maintenance of this farming implement and also for the
assemblage, retightening, lubrication and overhaul.
In the technical delivery, the dealer must advise the user on its maintenance, security, its obligations
under any technical assistance, the strict observance of the guarantee and reading of the instruction manual.
Any request for technical assistance under warranty should be made to the dealer where it was purchased.
We reiterate the need for careful reading of the Warranty Certicate and observance of all items in this instruction manual, as doing
so, the useful life of your farming implement will increase.

No Till Seed Drill Special
SPDE CXP

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP  5
Instruction Manual
TABLE OF CONTENTS
WARRANTY............................................................................................................................................................................................................................................................................................................................ 8
Product Warranty............................................................................................................................................................................................................................................................................................................................................................................................ 8
GENERAL INFORMATION ..................................................................................................................................................................................................................................................................................................... 9
Owner ............................................................................................................................................................................................................................................................................................................................................................................................................. 9
SAFETY RULES....................................................................................................................................................................................................................................................................................................................... 10  12
WARNINGS............................................................................................................................................................................................................................................................................................................................. 13
COMPONENTS ....................................................................................................................................................................................................................................................................................................................... 14
SPDE CXP - No Till Seed Drill Special ................................................................................................................................................................................................................................................................................................................................................................. 14
TECHNICAL SPECIFICATIONS .............................................................................................................................................................................................................................................................................................. 15
ASSEMBLY.............................................................................................................................................................................................................................................................................................................................. 16
Coupling Head Assembly ................................................................................................................................................................................................................................................................................................................................................................................. 16
Roller Assembly............................................................................................................................................................................................................................................................................................................................................................................................... 17
Assembly of the Fine Seeds Box (Pasture) Optional .......................................................................................................................................................................................................................................................................................................................................... 17 - 18
Optional Front Line Marker Assembly .............................................................................................................................................................................................................................................................................................................................................................. 19 - 20
Mechanical Side Transport Assembly - Optional .............................................................................................................................................................................................................................................................................................................................................. 21
Hydraulic Side Mount Assembly - Optional ...................................................................................................................................................................................................................................................................................................................................................... 22 - 24
COUPLER................................................................................................................................................................................................................................................................................................................................ 25
Coupling on the Tractor ................................................................................................................................................................................................................................................................................................................................................................................... 25
LEVELING............................................................................................................................................................................................................................................................................................................................... 26
Leveling of the Seeder ..................................................................................................................................................................................................................................................................................................................................................................................... 26
TRANSPORT........................................................................................................................................................................................................................................................................................................................... 27
Procedure for Transportation .......................................................................................................................................................................................................................................................................................................................................................................... 27
WORK ..................................................................................................................................................................................................................................................................................................................................... 28
Procedure for Work ......................................................................................................................................................................................................................................................................................................................................................................................... 28
WORK / TRANSPORT............................................................................................................................................................................................................................................................................................................. 29
Fixation System and Wheel Articulation .......................................................................................................................................................................................................................................................................................................................................................... 29
Using the Ladder ............................................................................................................................................................................................................................................................................................................................................................................................. 29
SPACING................................................................................................................................................................................................................................................................................................................................. 30
Spacing Between Lines.................................................................................................................................................................................................................................................................................................................................................................................... 30
Number of Even Lines ...................................................................................................................................................................................................................................................................................................................................................................................... 30
Number of Odd Lines ...................................................................................................................................................................................................................................................................................................................................................................................... 30
Spacing Tables in Milimiters............................................................................................................................................................................................................................................................................................................................................................................. 31
New Spacings ................................................................................................................................................................................................................................................................................................................................................................................................. 32 - 33
ADJUSTMENTS...................................................................................................................................................................................................................................................................................................................... 34
Adjusting of the Line Markers .......................................................................................................................................................................................................................................................................................................................................................................... 34
Adjusting ot the Line Marker Discs .................................................................................................................................................................................................................................................................................................................................................................. 35
Adjusting of the Line Marker Bar ..................................................................................................................................................................................................................................................................................................................................................................... 35
Finishing System ............................................................................................................................................................................................................................................................................................................................................................................................. 36
SEED DISTRIBUTION SYSTEM.............................................................................................................................................................................................................................................................................................. 37
Seed Adjustment ............................................................................................................................................................................................................................................................................................................................................................................................. 37 - 38

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP  6
Instruction Manual
TABLE OF CONTENTS
Adjustment for Seed Distribution..................................................................................................................................................................................................................................................................................................................................................................... 38 - 39
To calculate the amount of Fertilizer and Seed per Ha or AA, One should:......................................................................................................................................................................................................................................................................................................... 39
Adjustment of the Fine Seed Box (Pasture) - Optional ...................................................................................................................................................................................................................................................................................................................................... 40
FERTILIZER DISTRIBUTION SYSTEM................................................................................................................................................................................................................................................................................... 41
Independent Fertilizer Distribution System ...................................................................................................................................................................................................................................................................................................................................................... 41
Fertisystem Fertilizer Distribution System - Optional........................................................................................................................................................................................................................................................................................................................................ 42
Speed Box ....................................................................................................................................................................................................................................................................................................................................................................................................... 43
Adjustment for Fertilizer Distribution............................................................................................................................................................................................................................................................................................................................................................... 43
Fertilizer Distribution Table per Hectare 20/31 - SPDE CXP ............................................................................................................................................................................................................................................................................................................................... 44
Distribution Table for Fertilizer per Hectare 31/20 - SPDE CXP ......................................................................................................................................................................................................................................................................................................................... 45
CALCULATION ....................................................................................................................................................................................................................................................................................................................... 46
Practical Calculation for Fertilizer Distribution ................................................................................................................................................................................................................................................................................................................................................. 46
Pratical Test to Assess the Quantity of Fertilizer and Seed Distribution.............................................................................................................................................................................................................................................................................................................. 47
PLANTING LINES................................................................................................................................................................................................................................................................................................................... 48
Optional Line Models ...................................................................................................................................................................................................................................................................................................................................................................................... 48 - 55
ADJUSTMENT OF THE LINES................................................................................................................................................................................................................................................................................................ 56
Spring Pressure Adjustment ............................................................................................................................................................................................................................................................................................................................................................................ 56
Limiters .......................................................................................................................................................................................................................................................................................................................................................................................................... 57
Depth Limiter Flange ...................................................................................................................................................................................................................................................................................................................................................................................... 57
Adjustment of the “V” Compactor Wheel ......................................................................................................................................................................................................................................................................................................................................................... 57
Adjustment of the Iron Compactor Wheel - Optional ....................................................................................................................................................................................................................................................................................................................................... 58
Adjustment of the Slit or Plain Cutting Disc...................................................................................................................................................................................................................................................................................................................................................... 59
Adjustment of Angle and Depth Limiter Wheel Depth ..................................................................................................................................................................................................................................................................................................................................... 59
Compactor Wheel Regulation - Optional ........................................................................................................................................................................................................................................................................................................................................................ 60
Adjustment of the Double Disk Cleaners .......................................................................................................................................................................................................................................................................................................................................................... 60
OPERATION............................................................................................................................................................................................................................................................................................................................ 61
Counterweights............................................................................................................................................................................................................................................................................................................................................................................................... 61
Recommendations for Operation ..................................................................................................................................................................................................................................................................................................................................................................... 62
MAINTENANCE...................................................................................................................................................................................................................................................................................................................... 63
Tire Pressure .................................................................................................................................................................................................................................................................................................................................................................................................... 63
Lubrication...................................................................................................................................................................................................................................................................................................................................................................................................... 63
Table of Grease and Equivalents....................................................................................................................................................................................................................................................................................................................................................................... 63
Lubricate Every 10 Hours of Work .................................................................................................................................................................................................................................................................................................................................................................... 65 - 65
Lubricate Every 30 Hours of Work .................................................................................................................................................................................................................................................................................................................................................................... 66
Lubricate Every 60 Hours of Work..................................................................................................................................................................................................................................................................................................................................................................... 66
Lubricate Every 200 Hours of Work................................................................................................................................................................................................................................................................................................................................................................... 67
Chain Tension .................................................................................................................................................................................................................................................................................................................................................................................................. 67
Oscillating Stretcher ....................................................................................................................................................................................................................................................................................................................................................................................... 67
Operational Maintenance ............................................................................................................................................................................................................................................................................................................................................................................... 68
Care ................................................................................................................................................................................................................................................................................................................................................................................................................ 68 - 69

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP  7
Instruction Manual
TABLE OF CONTENTS
Cleaning.......................................................................................................................................................................................................................................................................................................................................................................................................... 69
Seeder conservation ........................................................................................................................................................................................................................................................................................................................................................................................ 69 - 70
Cleaning the Fertisystem Driver ....................................................................................................................................................................................................................................................................................................................................................................... 71
Fertisystem Conductor Maintenance Tube........................................................................................................................................................................................................................................................................................................................................................ 72
Fertisystem Conductor Blocking Tube .............................................................................................................................................................................................................................................................................................................................................................. 73
Spring and Caps (Optional) Fertisystem driver ................................................................................................................................................................................................................................................................................................................................................. 73
OPCIONALS ........................................................................................................................................................................................................................................................................................................................... 74
Cpl Iron Wheel Cart ......................................................................................................................................................................................................................................................................................................................................................................................... 74
Cpl Compactor Wheels..................................................................................................................................................................................................................................................................................................................................................................................... 74
Limiter ange w/ Cleaner ................................................................................................................................................................................................................................................................................................................................................................................ 75
Mechanical Side Transport Kit.......................................................................................................................................................................................................................................................................................................................................................................... 76
Hydraulic Side Transport Kit ............................................................................................................................................................................................................................................................................................................................................................................ 76
Fine Seeds Box Cpl ........................................................................................................................................................................................................................................................................................................................................................................................... 77
Cpl Line Marker System w/Steering.................................................................................................................................................................................................................................................................................................................................................................. 77
ETD System (Electronic Dosing Table) ............................................................................................................................................................................................................................................................................................................................................................... 78
ETD MANUAL......................................................................................................................................................................................................................................................................................................................... 79
Presentation.................................................................................................................................................................................................................................................................................................................................................................................................... 79
Mounting the magnets on the main axis.......................................................................................................................................................................................................................................................................................................................................................... 80
Mounting the speed sensor.............................................................................................................................................................................................................................................................................................................................................................................. 80
Speed sensor installation................................................................................................................................................................................................................................................................................................................................................................................. 81
Identication................................................................................................................................................................................................................................................................................................................................................................................................... 81
Settings menu ................................................................................................................................................................................................................................................................................................................................................................................................. 82
Sensor calibration............................................................................................................................................................................................................................................................................................................................................................................................ 82
Machine .......................................................................................................................................................................................................................................................................................................................................................................................................... 83
Sensor machine............................................................................................................................................................................................................................................................................................................................................................................................... 83
Seed rate ......................................................................................................................................................................................................................................................................................................................................................................................................... 84
Fertilizer rate................................................................................................................................................................................................................................................................................................................................................................................................... 84 - 85
Total calculation.............................................................................................................................................................................................................................................................................................................................................................................................. 85
Calibrate fertilizer............................................................................................................................................................................................................................................................................................................................................................................................ 85 - 86
F3 Hour meter ................................................................................................................................................................................................................................................................................................................................................................................................. 87
F4 Hectometer................................................................................................................................................................................................................................................................................................................................................................................................. 87
Settings menu ................................................................................................................................................................................................................................................................................................................................................................................................. 88
Sensor calibration............................................................................................................................................................................................................................................................................................................................................................................................ 88 - 89
Machine .......................................................................................................................................................................................................................................................................................................................................................................................................... 89 - 90
Time above maximum speed ........................................................................................................................................................................................................................................................................................................................................................................... 90
IDENTIFICATION.................................................................................................................................................................................................................................................................................................................... 91
Product Identication ..................................................................................................................................................................................................................................................................................................................................................................................... 91
NOTES..................................................................................................................................................................................................................................................................................................................................... 92  93
CERTIFICATE.......................................................................................................................................................................................................................................................................................................................... 94
Warranty Certicate ........................................................................................................................................................................................................................................................................................................................................................................................ 94 - 96

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP  8
Instruction Manual
GUARANTEE
BALDAN IMPLEMENTOS AGRÍCOLAS S/A, ensures normal operation of the tool to the dealer for a period of six (6) months from the delivery date on the
resale invoice to the rst end consumer.
During this period BALDAN undertakes to remedy defects in materials and/or workmanship of their responsibility, and the labour, freight and other expenses
of the responsibility of the dealer.
During the warranty period, the order and replacement of any defective parts must be made to the dealer in the region, who will send the defective part for
analysis at BALDAN.
When such a procedure is not possible and exhausted the resolution capacity of the dealer, the dealer will request support from the Technical Assistance of
BALDAN, through the specic form distributed to resellers.
After analysing the items replaced by the Technical Assistance of BALDAN, and concluded that it is not a warranty issue, so it will be of responsibility of the reseller
any costs related to replacement; as well as the cost of materials, travel including accommodation and meals, accessories, lubricant and other expenses resulting
from the call to the service, with the BALDAN company being authorised to make its billing on behalf of the reseller.
Any repairs made to the product that is within the warranty period of the dealer will only be authorized by BALDAN with prior presentation of the budget
describing the work of parts and labor to be performed.
It is excluded from this term the product that is repaired or modied in shops that do not belong to the dealer network of BALDAN, as well as the use of
non-genuine parts or components in the product of the customer
This guarantee will be void when it is determined that the defect or damage is the result of improper product use, failure to follow instructions or the
inexperience of the operator.
It is agreed that this warranty does not cover tires, polyethylene tanks, drive shafts, hydraulic components, etc., which is equipment guaranteed by their
manufacturers.
Manufacturing and or material defects, object of this warranty term, will not constitute, under any circumstances, a reason for termination of the purchase
and sale contract or compensation of any nature.
BALDAN reserves the right to modify and or improve the technical characteristics of its products without notice and without obligation so to proceed with
the products previously manufactured.
PRODUCT WARRANTY

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP  9
Instruction Manual
OVERVIEW
NR-31 - SAFETY AND HEALTH AT WORK IN AGRICULTURE, FORESTRY, FOREST EXPLORATION AND AQUACULTURE.
The purpose of this Regulatory Standard is to establish the precepts to be observed in the organization and in the work environment, in a anner
compatible with the planning and development of agriculture, livestock, forestry, forestry exploration and aquaculture activities with safety and
health and work environment.
For more information, check the website and read the full NR-31.
http://portal.mte.gov.br/legislacao/normas-regulamentadoras-1.htm
Please read and follow the NR-31 standard carefully.
OWNER OR OPERATOR OF THE EQUIPMENT.
BALDAN IMPLEMENTOS AGRÍCOLAS S/A, is not liable for any damage caused by accidents arising from the use, transportation or improper or incorrect
storage of your tool, whether due to negligence and/or inexperience of any person.
Only persons with full knowledge of the tractor and the tool may carry out the transportation and operation of the same.
BALDAN shall not be liable for any damage caused in unforeseeable or unrelated situations to the normal use of the tool.
OWNER
The mishandling of this equipment can result in serious or fatal accidents. Before putting the equipment into operation, please read the instructions in this
manual. Ensure that the person responsible for the operation is instructed in the correct and safe handling of it. Also make sure that the operator has read and
understood the instruction manual of the product.

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP  10
Instruction Manual
SAFETY NORMS
ETHIS SYMBOL INDICATES AN IMPORTANT SAFETY WARNING. PLEASE READ THIS MANUAL CAREFULLY WHEN YOU COME ACROSS IT BE AWARE OF
THE CONTENT AHEAD AND PAY ATTENTION TO THE POSSIBILITY OF PERSONAL ACCIDENTS.
ATTENTION
ATTENTION
ATTENTION
ATTENTION
ATTENTION
ATTENTION
• There are risks of se-
rious injury by overtur-
ning when working on
slopes.
• Do not use excessive
speed.
• Read the instruction
manual carefully for
recommended safety
practices.
• Do not carry person-
nel on the tractor and
neither inside nor on
the equipment.
• Only start the tractor
when you are proper-
ly seated and the seat
belt is locked.
• Before carrying out
any maintenance on
your equipment, make
sure that it is properly
stationary. Avoid get-
ting run over.
• Do not operate the
tractor if the front is
light. If there is a ten-
dency to lift, add wei-
ghts to the front or
front wheels.