BDI CORRIDOR User manual

1
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Corridor®Office furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer with a
moist cloth.
Your Corridor®Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI retailer.
A1 Cabinet
C6 File Bar Clip x 4
C2 Pull x 3
C4.1 Small File Bar x 2
C8 Locking Swivel
Caster x 4
C9 Fixed Caster x 1
H5 Phillips Machine
Screw x 20
H2 M4 x 38mm
Screw x 6
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Corridor & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI
Made in China. 02.05.2016 V2
bdiusa.com
customerservic[email protected]om
CORRIDORTM 6507
MOBILE FILE PEDESTAL
Tool Required:
Phillips screwdriver

bdiusa.com
customerservic[email protected]om
CORRIDOR 6507
MOBILE FILE PEDESTAL
2
Step 3 - Attach Pulls using Screws H2 and tighten with a Phillips screwdriver.
Step 2 - Rest Cabinet on its back side. Attach Casters to Cabinet using Screws H5 and tighten with a
Phillips screwdriver.
C9 (x1)
C8 (x4)
C2
H2
H2
H5 (x20)
H2 (x6)

bdiusa.com
customerservic[email protected]om
CORRIDOR 6507
MOBILE FILE PEDESTAL
3
Step 4 - File Bar Installation (Letter File)
For letter files facing sideways, attach File Bar Clip C6 to both ends of Small File Bar C4.1 as shown. Place
the file bar assembly in the notches located on the left and right drawer side panels. For front facing letter files,
skip this step altogether.
Step 5 - Legal File Accommodation
C6
C4

bdiusa.com
customerservic[email protected]om
CORRIDOR 6507
MOBILE FILE PEDESTAL
4
Tool Required:
Phillips screwdriver
Corridor file cabinets are pre-assembled with matching locks. If you require unique locks for your home or office
use, please contact BDI Customer Service at [email protected] to purchase a unique lock and key
replacement kit which includes a lock assembly and two keys. To replace the lock please follow the instructions
below.
Optional - Lock Removal and Installation
1. Open the drawer which houses the lock.
2. Using a Phillip’s screw driver, loosen the 2 screws that secure the lock assembly to the back of the drawer
facia panel.
3. Replace it with the new lock assembly and re-tighten the 2 screws.