BDI VOCA 3501 User manual

VOCA®3501
OFFICE CHAIR
DESIGNED IN DENMARK
LET’S GET STARTED.
INSTRUCTION MANUAL

BDIUSA.COM | 3NEED ASSISTANCE? [e-mail]
Congratulations on the purchase of your Voca Oce Chair 3501 from BDI. Your oce
chair has been designed to provide a lifetime of enjoyment. This manual will provide
you with assembly instructions and other helpful information to ensure that you get the
most out of your product. Please save it for future reference.
Your Voca Oce Chair has been engineered for simple assembly. Please follow these
directions carefully to prevent any damage.
Should you need further assistance, contact BDI at customerservic[email protected]om.
ENJOY!

4 | BDIUSA.COM VOCA 3501
HARDWARE AND COMPONENTSHARDWARE AND COMPONENTS
Unpack and identify the parts listed below. The assembly workspace should be a non-marring
surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at
customerservic[email protected].
Do not use power tools for the assembly of this product.
For all other concerns, please contact your BDI retailer.
PART # C1
DESCRIPTION Backrest Assembly
QUANTITY 1
PART # C2
DESCRIPTION Seat
QUANTITY 1
PART # C3
DESCRIPTION Seat Mechanism
QUANTITY 1
PART # T1
DESCRIPTION 4mm Hex Wrench
QUANTITY 1
PART # H1
DESCRIPTION Hex Screw w/ Washer
QUANTITY 3
PART # H2
DESCRIPTION Hex Screw x 7/8"
QUANTITY 4
PART # T2
DESCRIPTION 5mm Hex Wrench
QUANTITY 1
PART # H3
DESCRIPTION Hex Screw x 1 3/4"
QUANTITY 6

BDIUSA.COM | 5NEED ASSISTANCE? [e-mail]
PART # C4
DESCRIPTION Armrest (Left & Right)
QUANTITY 1 of each
PART # C6
DESCRIPTION Base
QUANTITY 1
PART # C7
DESCRIPTION Swivel Wheel
QUANTITY 5
PART # C5
DESCRIPTION Lift Column
QUANTITY 1
HARDWARE AND COMPONENTS

6 | BDIUSA.COM VOCA 3501
Using the box as a workbench, position the
(C1) Backrest Assembly as shown. Connect the
(C3) Seat Mechanism to the (C1) Backrest
Assembly using 3 (H1) Screws with Washers.
Tighten with (T2) 5mm Hex Wrench.
STEP 1. CONNECT SEAT MECHANISMASSEMBLY
PART/DESCRIPTION QTY
T2-HEX WRENCH 1
H1-SCREW 3
C1
C3
C3
C1
H1
H1
H1

BDIUSA.COM | 7NEED ASSISTANCE? [e-mail]
ASSEMBLY
STEP 2. ATTACH ARMREST
On the other end of the box, place (C2) Seat
upside down. Attach (C4) Left and Right
Armrest using 6 (H3) Screws and tighten with
(T1) 4mm Hex Wrench.
PART/DESCRIPTION QTY
T1-HEX WRENCH 1
H3-SCREW 6
H3
H3
C4
C4
C2

8 | BDIUSA.COM VOCA 3501
Position the Backrest/Seat Mechanism Assembly
on top of the (C2) Seat. Attach with 4 (H2) Screws
and tighten with (T2) 5mm Hex Wrench.
PART/DESCRIPTION QTY
T2-HEX WRENCH 1
H2-SCREW 4
STEP 3. ATTACH BACKREST / SEAT MECHANISMASSEMBLY
H2
H2
H2
H2
C2

BDIUSA.COM | 9NEED ASSISTANCE? [e-mail]
ASSEMBLY
ASSEMBLY
STEP 4. INSTALL LIFT COLUMN
STEP 5. INSTALL SWIVEL WHEELS
Position the (C5) Lift Column’s narrow end into the hole on
the bottom of the (C3) Seat Mechanism. Press into place.
Position the (C6) Base upside down on the carpeted floor. Press the (C7) Swivel Wheels firmly into
the holes until they lock.
C5
C3
C6
C7
C7
C7
C7
C7

10 | BDIUSA.COM VOCA 3501
Connect the (C6) Base to the chair either right side up (with base on the floor as shown) or upside
down on top of the box.
STEP 6. CONNECT THE BASEASSEMBLY
C6
C5