Ballard Designs Delmar Bar Stool JC336 User manual

PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 10-21-2019 Page 1 of 4
PRODUCT NAME: Delmar Bar Stool
ITEM NUMBER: JC336
ASSEMBLED DIMENSIONS : 30”H x 18”W x 16”D
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN VIETNAM

Customer Service: 800-367-2810
Online: www.ballarddesigns.com Page 2 of 4
Ltr.
A 8
B 4
Qty. Hardware Included
Ltr.
F
E 2
2
Qty. Components
C 8
REQUIRED TOOLS:
Allen Wrench (Included)
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
NOTE: To avoid accidentally
discarding small parts or hardware,
retain all carton contents until
assembly and installation are complete.
Large Screw
Small Screw
Wood Plug
Allen Wrench
D 2
G
H
1
2
Legs (E)
Upper Cross Bars (F)
Seat (G)
Lower Cross Bars (H)

STEP 1: Attach Seat (G) and both Lower Cross Bars (H) to Leg (E) using Large Screws (A).
Tighten using Allen Wrench (D)
(G)
(H)
(E)
(A)
Page 3 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 2: Insert dowel on end of each Upper Cross Bar (F) into holes in Leg (E). Fit remaining Leg onto
open side as shown. Insert remaining Large Screws (A) into holes and tighten using Allen Wrench (D).
(F)
(E)
(A)

Page 4 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 3: Secure both Upper Cross Bars (F) to each Leg (E) by inserting Small Screw (B) into open
holes and firmly tightening using Allen Wrench (D).
(F)
(E)
(E)
(F)
(B)
STEP 4: Insert a Wood Plug (C) into each open Screw Hole in sides of each Leg (E)
(C)
(C)
(E)
Cleaning & Care:
DO NOT use alcohol based products or spray polisher as
they can damage the finish. Dust with soft cloth.