Belden DCX XCONNECT SPOOL User manual

DCX XCONNECT SPOOL
QUICK START GUIDE
PX106857 - EN REV A Page 1 of 2
Before proceeding with Spool Kit installation, make sure to install (or determine the position of) the DCX Housings into the Cabinet.
The Housings positions will determine the location where to secure the Spools and the Brackets.
Spool kit assembly and installation
1.Determine the cable ow direction of the Cabinet.
For a left-to-right (LR) Cabinet, the Spool Kit will be installed at right.
For a right-to-left (RL) Cabinet, the Spool Kit will be installed at left.
Position 1
chosen as
example.
LR cabinet RL cabinet
Spool Kit installation area

DCX XCONNECT HOUSING PX106857 - EN REV A Page 2 of 4
QUICK START GUIDE
2. Set the Bracket at the required cable ow.
3. Slide the Spool into the Bracket and place it to the associated posistion.
Slots to secure
Fixed Spool
on position 1
LR cable ow
RL cable ow
Position related to the
installed Housing
Position related to the
installed Housing
Indicator related to the associated
position
Indicator related to the associated
position

DCX XCONNECT HOUSING PX106857 - EN REV A Page 3 of 4
QUICK START GUIDE
3. Once the Spool position is determined, secure the spool with the provided (plastic) screws and thigthen them to complete the assembly.
4. Locate the assembly position to the associated Housing and use the remaining screws (metallic) to secure the bracket.
Screws thighten at Position 1
Housing related to
Spool Kit installed.
Position 1 to place Spool Kit

DCX XConnect Spool- Quick Start Guide
PX106857 - EN REV A
This document is also available at our microsite:
www.belden.com/dcx
For more information about BELDEN Technical support, call:
1-800-BELDEN-1
Page 2 of 2
Scan this QR code to
access more technical
information of our
products and get
constant updates
5. (If required) repeat all previous steps to continue loading your management system.
NOTE: The example below show a Cross-Connection between the Housing 1 to the Housing 3.
Housing 1
Housing 2
Housing 3
Housing 4
Housing 5
Housing 6
Housing 7
Housing 8
Spool Kit at position 1
Spool Kit at position 2
Spool Kit at position 3
Spool Kit at position 4
Spool Kit at position 5
Spool Kit at position 6
Spool Kit at position 7
Spool Kit at position 8