Belden Lumberg Automation LioN-X 0980 XSL... User manual

Manual
CC-Link IE Field Basic
LioN-X IO-Link Master Multiprotocol:
0980 XSL 3912-121-007D-01F (8 x IO-Link Class A)
0980 XSL 3913-121-007D-01F (8 x IO-Link Class A/B Mixmodule)

LioN-Xlight IO-Link Master CC-Link IE Field Basic:
0980 LSL 3411-121-0006-010 (8 x IO-Link Class A)
0980 LSL 3410-121-0006-010 (4 x IO-Link Class A + 8 x DI)
Manual CC-Link IE Field Basic
Version 1.4 07/2023
Technical Support
lumberg-automation-support.belden.com

Contents
Contents
1 About this manual 8
1.1 General information 8
1.2 Explanation of symbols 9
1.2.1 Use of danger information 9
1.2.2 Use of general information 9
1.3 Version information 10
2 Safety instructions 11
2.1 Intended use 11
2.2 Qualified personnel 12
3 Designations and synonyms 13
4 System description 17
4.1 About LioN-X and LioN-Xlight 17
4.2 Device variants 18
4.3 I/O port overview 20
5 Overview of product features 23
5.1 CC-Link IE Field Basic product features 23
5.2 I/O port features 24
5.3 Integrated Web server 25
5.4 Security features 26
5.5 Other features 27
Manual CC-Link IE Field Basic
Version 1.4 07/2023
ii

Contents
6 Assembly and wiring 28
6.1 General information 28
6.2 Outer dimensions 29
6.2.1 LioN-X multiprotocol variants with CC-Link IE Field Basic 29
6.2.2 LioN-Xlight variants with CC-Link IE Field Basic 31
6.2.3 Notifications 33
6.3 Port assignments 34
6.3.1 Ethernet ports, M12 socket, 4-pin, D-coded 34
6.3.2 Power supply with M12 power L-coded 35
6.3.2.1 IO-Link Master with Class A ports 36
6.3.2.2 IO-Link Master with Class A/B ports 37
6.3.3 I/O ports as M12 sockets 37
6.3.3.1 IO-Link ports (Class A and Class B) 38
7 Starting operation 40
7.1 CSP+ file 40
7.2 MAC addresses 40
7.3 State on delivery 41
7.4 Setting the rotary encoding switches 42
7.4.1 CC-Link IE Field Basic 45
7.4.2 Factory reset 45
7.5 Setting network parameters 46
8 Configuration CC-Link IE Field Basic 47
8.1 General settings 48
8.1.1 Force mode lock 49
8.1.2 Web interface lock 49
8.1.3 Report UL/UAUX supply voltage fault 49
8.1.4 Report actuator fault without UL/UAUX voltage 49
8.1.5 Report US voltage fault 49
Manual CC-Link IE Field Basic
Version 1.4 07/2023
iii

Contents
8.1.6 External configuration lock 49
8.2 Port configuration X1 .. X8 50
8.2.1 Port Mode 54
8.2.2 Validation and Backup 54
8.2.3 IQ Mode 58
8.2.4 Cycle Time 58
8.2.5 Vendor ID 59
8.2.6 Device ID 59
8.2.7 IOL Failsafe 59
8.2.8 IOL Failsafe values 60
8.2.9 Swapping Length 60
8.2.10 Swapping Offset 61
8.2.11 Swapping Count 61
8.2.12 Sensor Supply Disabled 61
8.2.13 Suppress all Diagnosis 61
8.2.14 DO Surveillance Timeout 61
8.2.15 DO Failsafe 61
8.2.16 DO Restart Mode 62
8.2.17 DI Logic 62
8.2.18 DI Filter 63
8.2.19 Error LED Disable 63
8.2.20 Level LED Disable 63
8.2.21 Use Push Pull 63
8.2.22 Current Limit 63
9 Process data assignment 64
9.1 Consuming data (output) 65
9.2 Producing data (input) 66
10 Diagnostics processing 67
10.1 Error of the system/sensor power supply 67
10.2 Error of the auxiliary/actuator power supply 68
Manual CC-Link IE Field Basic
Version 1.4 07/2023
iv

Contents
10.3 Overload/short circuit of the digital outputs 68
10.4 Overload/short circuit of the actuator power supply P24 70
10.5 Overload/short-circuit of the I/O port sensor supply outputs 71
11 Configuration and operation with
GxWorks3®72
11.1 Integration of a CSP+ file 72
11.2 Network parameters 73
11.3 Parameter processing 75
12 IIoT functionality 78
12.1 MQTT 79
12.1.1 MQTT configuration 79
12.1.2 MQTT topics 82
12.1.2.1 Base topic 82
12.1.2.2 Publish topic 85
12.1.2.3 Command topic (MQTT Subscribe) 90
12.1.3 MQTT configuration - Quick start guide 94
12.1.3.1 MQTT configuration via JSON 94
12.2 OPC UA 96
12.2.1 OPC UA configuration 97
12.2.2 OPC UA address space 99
12.2.3 OPC UA configuration - Quick start guide 100
12.2.3.1 OPC UA configuration via JSON 100
12.3 REST API 102
12.3.1 Standard device information 104
12.3.2 Structure 105
12.3.3 Configuration and forcing 111
12.3.4 Reading and writing ISDU parameters 113
12.3.4.1 Reading ISDU 113
12.3.4.2 Writing ISDU 115
12.3.5 Example: Reading ISDU 117
Manual CC-Link IE Field Basic
Version 1.4 07/2023
v

Contents
12.3.6 Example: Writing ISDU 117
12.4 CoAP server 118
12.4.1 CoAP configuration 118
12.4.2 REST API access via CoAP 119
12.4.3 CoAP configuration - Quick start guide 122
12.4.3.1 CoAP configuration via JSON 122
12.5 Syslog 124
12.5.1 Syslog configuration 124
12.5.2 Syslog configuration - Quick start guide 127
12.5.2.1 Syslog configuration via JSON 127
12.6 Network Time Protocol (NTP) 129
12.6.1 NTP configuration 129
12.6.2 NTP configuration - Quick start guide 131
12.6.2.1 NTP configuration via JSON 131
13 The integrated Web server 133
13.1 LioN-X 0980 XSL... variants 134
13.1.1 The Status page 134
13.1.2 The Ports page 135
13.1.3 The System page 136
13.1.4 The User page 138
13.2 LioN-Xlight 0980 LSL... variants 139
13.2.1 The System page 139
14 IODD 141
14.1 IO-Link Device parameters and ISDU requests 141
14.2 Web GUI functionality 142
14.2.1 Port Details page 142
14.2.2 Parameters page 144
14.2.3 IODD Management page 146
Manual CC-Link IE Field Basic
Version 1.4 07/2023
vi

Contents
15 Technical data 147
15.1 General 148
15.2 CC-Link IE Field Basic protocol 149
15.3 Power supply of the module electronics/sensors 150
15.4 Power supply of the actuators 151
15.4.1 IO-Link Class A devices (UL) 151
15.4.2 IO-Link Class A/B devices (UAUX) 151
15.5 I/O ports Channel A (Pin 4) 152
15.5.1 Configured as digital input, Ch. A (Pin 4) 152
15.5.2 Configured as digital output, Ch. A (Pin 4) 153
15.5.3 Configured as IO-Link port in COM mode, Ch. A 154
15.6 I/O ports Channel B (Pin 2) 155
15.6.1 Configured as a digital input, Ch. B (Pin 2) 155
15.6.2 Configured as a digital output, Ch. B (Pin 2) 156
15.7 LEDs 158
15.8 Data transfer times 161
16 Accessories 163
Manual CC-Link IE Field Basic
Version 1.4 07/2023
vii

1.1 General information 1 About this manual
1 About this manual
1.1 General information
Read the assembly and operating instructions on the following pages carefully
before starting up the modules. Keep this information where it is accessible
to all users.
The texts, figures, diagrams, and examples used in this document are
exclusively used to explain how to operate and apply the modules.
Please contact us if you have any detailed questions on installing and starting
up the devices.
Belden Deutschland GmbH
– Lumberg Automation™ –
Im Gewerbepark 2
D-58579 Schalksmühle
Germany
lumberg-automation-support.belden.com
www.lumberg-automation.com
catalog.belden.com
Belden Deutschland GmbH – Lumberg Automation™ – reserves the right to
make technical changes or changes to this document at any time without
notice.
Manual CC-Link IE Field Basic
Version 1.4 07/2023
8

1 About this manual 1.2 Explanation of symbols
1.2 Explanation of symbols
1.2.1 Use of danger information
Danger information is denoted as follows:
Danger: Means that death, serious physical injury or substantial
damage to property will occur if the required safety measures are not
taken.
Warning: Means that death, serious physical injury or substantial
damage to property can occur if the required safety measures are not
taken.
Caution: Means that minor physical injury or damage to property can
occur if the required safety measures are not taken.
1.2.2 Use of general information
General information is denoted as follows:
Attention: Contains important information on the product, on how to
manage the product, or on the respective section of the documentation
to which your special attention is being drawn.
Manual CC-Link IE Field Basic
Version 1.4 07/2023
9

1.3 Version information 1 About this manual
1.3 Version information
Index Created Changes
1.0 03/2022
1.1 06/2022 Temporarily excluded device
variant information for 0980
XSL 3913-121-007D-01F
(shipping in 2023)
1.2 10/2022 Device variant information for
0980 XSL 3913-121-007D-01F
included.
Ch. 7.4: LED description
1.3 12/2022 Ch. 8.1 ("External configuration
lock")
1.4 07/2023 Warning in ch. Setting the
rotary encoding switches on
page 42
Table 1: Overview of manual revisions
Manual CC-Link IE Field Basic
Version 1.4 07/2023
10

2 Safety instructions 2.1 Intended use
2 Safety instructions
2.1 Intended use
The products described in this manual are decentralized IO-Link Masters on
an Industrial Ethernet Network.
We adhere to all safety standards when developing, producing, testing, and
documenting our products. When you adhere to the handling specifications
and safety instructions described for the configuration, assembly, and correct
operation, there should not normally be any risks for people or equipment.
The modules fulfill the requirements of the EMC guidelines (89/336/EEC,
93/68/EEC and 93/44/EEC) and the low voltage guideline (73/23/EEC).
The IO-Link Masters are designed to be used in the industrial sector. The
industrial environment is distinguished by the fact that the consumer is not
connected directly to the public low voltage network. Additional measures are
required for use in residential areas or in business and commercial sectors.
Attention: This equipment may cause radio interference in residential
areas. In this case the operator may be requested to carry out
appropriate measures.
The proper and safe operation of this product depends on proper
transportation, storage, assembly, and installation, and careful operation.
A completely assembled device housing is required for the proper operation
of the IO-Link Masters. Only connect devices that fulfill the requirements of
EN 61558-2-4 and EN 61558-2-6 to the IO-Link Masters.
During the configuration, installation, start-up, maintenance, and testing of
the devices, adhere to the safety and accident-prevention guidelines for the
specific application.
Only install cables and accessories that fulfill the requirements and
regulations for safety, electromagnetic compatibility, and, where applicable,
telecommunication end devices, as well as the specification information.
Information on which cables and accessories are permitted for the installation
Manual CC-Link IE Field Basic
Version 1.4 07/2023
11

2.2 Qualified personnel 2 Safety instructions
can be obtained from Belden Deutschland GmbH – Lumberg Automation™
or is contained in this manual.
2.2 Qualified personnel
The configuration, installation, start-up, maintenance, and testing of the
devices may only be performed by a qualified electrician who is familiar with
the safety standards of the automation technology.
The personnel requirements are based on the requirement profiles described
by ZVEI, VDMA, or equivalent organizations.
Only electricians who are familiar with the content of all provided device
documentation are authorized to install and maintain the devices described.
These are persons who
Dbased on their technical training, knowledge, and experience, and their
knowledge of the pertinent standards, can evaluate the work to be carried
out and identify any potential risks or
Dbased on working for several years in a related sector, have the same level
of knowledge as they would have from the relevant technical training.
Only Belden Deutschland GmbH – Lumberg Automation™ – is permitted to
make changes to the hardware or software of the products that go beyond
the scope of this manual.
Warning: Making unqualified changes to the hardware or software, or
non-adherence to the warning information contained in this document,
can result in serious personal injury or damage to equipment.
Attention: Belden Deutschland GmbH accepts no liability for any
damage caused by unqualified personnel or improper use. This
automatically voids the warranty.
Manual CC-Link IE Field Basic
Version 1.4 07/2023
12

3 Designations and synonyms
3 Designations and synonyms
AOI Add-On Instruction
API Application Programming Interface
BF Bus Fault LED
Big Endian Data format with High-B on first place (PROFINET and IO-Link)
BUI Back-Up Inconsistency (EIP diagnostics)
CC CC-Link IE Field
C/Q I/O port pin 4 mode, IO-Link communication/switching signal
Ch. A Channel A (Pin 4) of I/O port
Ch. B Channel B (Pin 2) of I/O port
CIP Common Industrial Protocol (media independent protocol)
Class A IO-Link port specification (Class A)
Class B IO-Link port specification (Class B)
CoAP Constrained Application Protocol
CSP+ Control & Communication System Profile Plus
DCP Discovery and Configuration Protocol
DevCom Device Comunicating (EIP diagnostics)
DevErr Device Error (EIP diagnostics)
DI Digital Input
DIA Diagnostic LED
DO Digital Output
DIO Digital Input/Output
DTO Device Temperature Overrun (EIP diagnostics)
DTU Device Temperature Underrun (EIP diagnostics)
DUT Device under test
EIP EtherNet/IP
ERP Enterprise Resource Planning system
ETH ETHERNET
Manual CC-Link IE Field Basic
Version 1.4 07/2023
13

3 Designations and synonyms
FE Functional Earth
FME Force Mode Enabled (EIP diagnostics)
FS Functional Safety
FSU Fast Start-Up
GSDML General Station Description Markup Language
High-B High-Byte
ICE IO-Link port COM Error (EIP diagnostics)
ICT Invalid Cycle Time (EIP diagnostics)
IDE IO-Link port Device Error (EIP diagnostics)
IDN IO-Link port Device Notification (EIP diagnostics)
IDW IO-Link port Device Warning (EIP diagnostics)
IIoT Industrial Internet of Things
ILE Input process data Length Error (EIP diagnostics)
IME Internal Module Error (EIP diagnostics)
I/O Input / Output
I/O port X1 .. X8
I/O port pin 2 Channel B of I/O ports
I/O port pin 4 (C/Q) Channel A of I/O ports
IODD I/O Device Description
IOL or IO-L IO-Link
I/Q I/O port pin 2 mode, Digital Input/switching signal
ISDU Indexed Service Data Unit
IVE IO-Link port Validation Error (EIP diagnostics)
I&M Identification & Maintenance
JSON JavaScript Object Notation (platform independent data format)
L+ I/O port pin 1, sensor power supply
LioN-X 60 LioN-X variants with a width of 60mm
Little Endian Data format with Low-B on first place (EtherNet/IP)
LLDP Link Layer Discovery Protocol
Low-B Low-Byte
Manual CC-Link IE Field Basic
Version 1.4 07/2023
14

3 Designations and synonyms
LSB Least Significant Bit
LVA Low Voltage Actuator Supply (EIP diagnostics)
LVS Low Voltage System/Sensor Supply (EIP diagnostics)
MIB Management Information Base
MP Multiprotocol: PROFINET + EtherNet/IP + EtherCAT® +
Modbus TCP (+ CC-Link IE Field Basic)
MQTT Message Queuing Telemetry Transport (open networking
protocol)
MSB Most Significant Bit
M12 Metric thread according to DIN 13-1 with 12 mm diameter
NTP Network Time Protocol
OLE Output process data Length Error (EIP diagnostics)
OPC UA Open Platform Communications Unified Architecture (platform
independent, service-oriented architecture)
PD Process Data
PLC Programmable Logic Controller
PN PROFINET
PWR Power
Qualifier Validity on a process value. Valid = "1"
REST REpresentational State Transfer
RFC Request for Comments
RPI Requested Packet Interval
RWr Word data input as seen from the master station (CC-Link)
RWw Word data output as seen from the master station (CC-Link)
RX Bit data input as seen from the master station (CC-Link)
RY Bit data output as seen from the master station (CC-Link)
SCA Short Circuit Actuator/UL/UAUX (EIP diagnostics)
SCS Short Circuit Sensor (EIP diagnostics)
SIO mode Standard Input Output mode
SLMP Seamless Message Protocol
SNMP Simple Network Management Protocol
Manual CC-Link IE Field Basic
Version 1.4 07/2023
15

3 Designations and synonyms
SP Single Protocol (PROFINET, EtherNet/IP, EtherCAT®,
Modbus TCP or CC-Link IE Field Basic)
SPE Startup Parameterization Error (EIP diagnostics)
T-B Test Channel B
T-A Test Channel A
UAUX UAuxiliary, supply voltage for the load circuit (Actuator supply on
Class B ports of Class A/B IO-Link Master)
UDP User Datagram Protocol
UDT User-Defined Data Types
UINT8 Byte in PLC (IB, QB)
UINT16 Unsigned integer with 16 bits or word in PLC (IW, QW)
ULULoad, supply voltage for the load circuit (Actuator supply on
Class A IO-Link Master)
UL Underwriters Laboratories Inc. (certification company)
UTC Coordinated Universal Time (Temps Universel Coordonné)
Table 2: Designations and synonyms
Manual CC-Link IE Field Basic
Version 1.4 07/2023
16

4 System description 4.1 About LioN-X and LioN-Xlight
4 System description
The LioN modules (Lumberg Automation™ Input/Output Network) function
as the interface in an industrial Ethernet system: A central controller on the
management level is able to communicate with the decentralized sensors and
actuators on the field level. The line or ring topologies for which LioN modules
can be used ensure not only reliable data communication but also significantly
reduce the number of cables required and thus also the costs for installation
and maintenance. They additionally enable easy and quick extension.
4.1 About LioN-X and LioN-Xlight
The LioN-X and LioN-Xlight variants convert standard input, standard output
or IO-Link signals from sensors & actuators into an industrial Ethernet protocol
(PROFINET, EtherNet/IP, EtherCAT®, Modbus TCP, CC-Link IE Field Basic)
and/or into a cloud protocol (REST API, OPC UA, MQTT). For the first time,
there is now Syslog on board. The robust 8 port housing design allows the use
even in harsh environments where e.g. weld field immunity, high temperature
ranges or protection class IP67 & IP69K are needed. There are also LioN-
Xlight single protocol versions available with a limited feature set at a highly
attractive price point.
Use all benefits of the Lumberg Automation™ product solution by additionally
downloading the configuration tool LioN-Management Suite V2.0 from
www.belden.com to enable e.g. a fast and easy parameterization of the
connected IO-Link devices via the embedded IODD interpreter.
Manual CC-Link IE Field Basic
Version 1.4 07/2023
17

4.2 Device variants 4 System description
4.2 Device variants
The following variants are available in the LioN-X and the LioN-Xlight family:
Article
number
Product designation Description I/O port functionality
935700001 0980 XSL 3912-121-007D-00F LioN-X M12-60 mm,
IO-Link Master
Multiprotocol (PN, EIP,
EC, MB)
Security
8 x IO-Link Class A
935700002 0980 XSL 3912-121-007D-01F LioN-X M12-60 mm,
IO-Link Master
Multiprotocol (PN, EIP,
EC, MB, CC)
Security
8 x IO-Link Class A
935703001 0980 XSL 3913-121-007D-01F LioN-X M12-60 mm,
IO-Link Master
Multiprotocol (PN, EIP,
EC, MB, CC)
Security
8 x IO-Link Class A/B
Mixmodule
935701001 0980 LSL 3011-121-0006-001 LioN-Xlight M12-60 mm,
IO-Link Master
PROFINET
8 x IO-Link Class A
935702001 0980 LSL 3010-121-0006-001 LioN-Xlight M12-60 mm,
IO-Link Master
PROFINET
4 x IO-Link Class A
+ 8 x DI
935701002 0980 LSL 3111-121-0006-002 LioN-Xlight M12-60 mm,
IO-Link Master
EtherNet/IP
8 x IO-Link Class A
935702002 0980 LSL 3110-121-0006-002 LioN-Xlight M12-60 mm,
IO-Link Master
EtherNet/IP
4 x IO-Link Class A
+ 8 x DI
Manual CC-Link IE Field Basic
Version 1.4 07/2023
18

4 System description 4.2 Device variants
Article
number
Product designation Description I/O port functionality
935701003 0980 LSL 3211-121-0006-004 LioN-Xlight M12-60 mm,
IO-Link Master
EtherCAT®
8 x IO-Link Class A
935702003 0980 LSL 3210-121-0006-004 LioN-Xlight M12-60 mm,
IO-Link Master
EtherCAT®
4 x IO-Link Class A
+ 8 x DI
935701004 0980 LSL 3311-121-0006-008 LioN-Xlight M12-60 mm,
IO-Link Master
Modbus TCP
8 x IO-Link Class A
935702004 0980 LSL 3310-121-0006-008 LioN-Xlight M12-60 mm,
IO-Link Master
Modbus TCP
4 x IO-Link Class A
+ 8 x DI
935701005 0980 LSL 3411-121-0006-010 LioN-Xlight M12-60 mm,
IO-Link Master
CC-Link IE Field Basic
8 x IO-Link Class A
935702005 0980 LSL 3410-121-0006-010 LioN-Xlight M12-60 mm,
IO-Link Master
CC-Link IE Field Basic
4 x IO-Link Class A
+ 8 x DI
Table 3: Overview of LioN-X and LioN-Xlight variants
Manual CC-Link IE Field Basic
Version 1.4 07/2023
19

4.3 I/O port overview 4 System description
4.3 I/O port overview
The following tables show the main I/O port differences of the LioN-X
IO-Link Master family. Pin 4 and Pin 2 of the I/O ports can be configured partly
to IO-Link, Digital Input or Digital Output.
LioN-X Class A IO-Link ports
Device
variant
Port Pin 1 USPin 4 / Ch. A (C/Q) Pin 2 / Ch. B (I/Q)
Info:
–
Class A Type 1 Supply
by US
1)
Supply
by UL
2)
Type 1 Supply
by UL
2)
X8: Out (4 A) IOL DI DO (0.5 A) DO (2 A) DI DO (2 A)
X7: Out (4 A) IOL DI DO (0.5 A) DO (2 A) DI DO (2 A)
X6: Out (4 A) IOL DI DO (0.5 A) DO (2 A) DI DO (2 A)
X5: Out (4 A) IOL DI DO (0.5 A) DO (2 A) DI DO (2 A)
X4: Out (4 A) IOL DI DO (0.5 A) DO (2 A) DI DO (2 A)
X3: Out (4 A) IOL DI DO (0.5 A) DO (2 A) DI DO (2 A)
X2: Out (4 A) IOL DI DO (0.5 A) DO (2 A) DI DO (2 A)
0980
XSL
3x12...
X1: Out (4 A) IOL DI DO (0.5 A) DO (2 A) DI DO (2 A)
Table 4: Port configuration of 0980 XSL 3x12... variants
1) DO switch mode configured as "Push-Pull" (description in the configuration
chapters).
2) DO switch mode configured as "High-Side" (description in the configuration
chapters).
Manual CC-Link IE Field Basic
Version 1.4 07/2023
20