BEMIS bioBidet BB-600 User manual

OWNER’S MANUAL
BB600

2 3
TABLE OF CONTENTS
PRODUCT INFORMATION
Important Safeguards............................................4
Cautions Before Installation................................6
Safety Information...................................................8
Main Unit & Parts.....................................................10
PRODUCT INSTALLATION
Installation....................................................................11
Testing & Seat Bumpers.......................................14
PRODUCT OPERATION
Operation.....................................................................15
Cleaning........................................................................19
Maintenance...............................................................21
Troubleshooting Guide........................................24
Specifications...........................................................26
WARRANTY
Warranty.....................................................................28

4 5
IMPORTANT SAFEGUARDS
READ ALL OPERATING INSTRUCTIONS BEFORE INSTALLATION
•This product should be installed according to this manual.
•Read this manual carefully and install properly.
•Do not attempt to service this appliance yourself.
•Doing so will void the warranty.
READ ALL INSTRUCTIONS BEFORE USING
DANGER - TO REDUCE THE RISK OF ELECTRIC SHOCK:
•Do not place or store this appliance in a location where it can fall
or be pulled into a tub or sink.
•Do not place in, or drop into water or other liquids.
•Do not touch a product that has fallen into water. Unplug immediately.
WARNING - TO REDUCE THE RISK OF BURNS, ELECTRIC
SHOCK, FIRE, OR INJURY
•Close supervision is necessary when this appliance is used by or is near
infants, elders, or handicapped persons. Children should not be permitted
to use or touch this appliance without adult supervision. Be sure to adjust
the toilet seat’s temperature for elders, handicapped persons, or people
with sensitive skin.
•Use this appliance only for its intended purpose as described in this
manual. Do not use attachments not recommended by the manufacturer.
•Do not operate this appliance if the cord is damaged or if the product is
dropped into water.
•Install the unit properly by following the installation procedure.
•Only authorized persons can install or repair the unit. Do not attempt to
service this appliance by yourself. Doing so will void the warranty.
•Keep the cord away from heated surfaces.
•Never drop or insert any objects into any opening or hose.
•Do not use outdoors. Do not use aerosol or oxygen
spray products on the unit.
•Always follow the grounding instructions in this manual
before plugging in the unit.
SAVE THESE INSTRUCTIONS

6 7
CAUTIONS BEFORE INSTALLATION
NOTE THE FOLLOWING IMPORTANT POINTS
•Do not install in a location where water might be splashed on this
appliance or in a location exposed to excessive moisture where
condensation might form on the product’s surface.
•To avoid damage to electronic components due to high levels of
humidity, provide adequate ventilation by opening a window
and/or door when bathing.
•Water supply should have a water pressure of 0.08 MPA to 0.75 MPA
•Connect the product to a pipe carrying potable water. Do not connect to
an industrial water line or other water supplies that are not potable.
•Bring the unit to room temperature.
•The thermal protector in the water tank may malfunction
when transporting or storing warm water.
•The rated power voltage in AC 120V, 60Hz
•Do not plug the unit in, until installation is complete.
It may result in malfunction.
WIRING REQUIREMENTS
•Any other servicing should be performed by authorized
service representatives.
•GROUNDING INSTRUCTIONS - This product should be grounded. In
the event of an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric current.
This product is equipped with a cord having a grounding wire with
a grounding plug. This plug must be plugged into an outlet that is
properly installed and grounded.
DANGER - IMPROPER USE OF THE GROUNDING PLUG CAN
RESULT IN A RISK OF ELECTRIC SHOCK.
•If the cord or plug is necessary to repair or needs to be replaced, do not
connect the grounding wire to a flat blade terminal. The grounding wire
can be identified by its insulated outer surface. It will either be colored
green or will not contain yellow stripes. Check with a qualified electrician
or serviceman if you do not understand grounding instructions or if you
do not know whether the product is properly grounded.
•This product is for use on a nominal 120V circuit. It has a grounding plug
that looks like the plug illustrated in sketch A. A temporary adapter,
which looks like the adapter illustrated in sketches B and C, may be
used to connect this plug to a 2-pole receptacle as shown in sketch B
if a properly grounded outlet is not available. The temporary adapter
should be used only until the properly grounded outlet (sketch A) can
be installed by a qualified electrician. The green colored rigid ear, lug and
the like extending from the adapter must be connected to a permanent
ground such as properly grounded outlet box cover. Whenever the
adapter is used, it must be held in place by the screw.
•If it is necessary to use an extension cord, use only a three wire
extension cord that has a three-blade grounding plug, and a thee-slot
receptacle that will accept the plug on the product. Replace or repair
a damaged cord.

8 9
SAFETY INFORMATION
FOLLOW THESE BASIC INSTRUCTIONS TO ENSURE
THE SAFE USE OF YOUR APPLIANCE.
DANGER
•DO NOT use a faulty or loose electric outlet or cord.
Doing so may result in a short circuit, electric shock, or fire.
•DO NOT obstruct the warm air dryer outlet.
If the outlet is obstructed with any objects, it may result in fire.
If the outlet is obstructed with hands, it may result in injury.
•DO NOT throw anything flammable into the toilet.
Doing so may result in fire.
•DO NOT splash water on this product.
Doing so may result in fire or electric shock.
•DO NOT use too many appliances on one power strip.
Doing so may result in fire or damage.
Be sure to use a dry and clean outlet.
Do not use a faulty or loose outlet.
•DO NOT use when the seat and lid are disassembled.
Doing so may result in electric shock due to high voltage inside.
•DO NOT disassemble, repair, or modify this appliance.
Doing so may result in fire or electric shock.
•Plug and unplug properly.
Do not plug or unplug with wet hands. It may result in injury or short
circuit. Do not grab the cord when unplugging. Pull out the plug properly.
•Unplug when beeping or emitting a strange odor.
Unplug right away. Contact your dealer where you bought this appliance.
•Use tap potable water only (ground water)
Not doing so may cause irritation or injury.
•This product must be grounded.
Not doing so may result in short circuit, electric shock, or malfunction.
WARNING
•DO NOT step on or place heavy objects on this appliance.
Doing so may damage the unit.
Doing so may result in malfunction of appliance.
•DO NOT force the lid to close.
Doing so may cause malfunction.
•DO NOT sit or lean against the lid or control panel.
Doing so may cause malfunction or breakage.
•DO NOT pull out the water hose forcefully.
Doing so may cause water leakage.
•DO NOT put a vase, water cup, or small materials on this appliance.
•Be aware of low-grade burns.
Sitting on the heated seat for a long time may result in a low-grade burn.
Use care when being used by the following: Children, senior citizens,
patients, or others who can not control the temperature level. Sleeping
pill users or people who are on medication that causes drowsiness. Those
who are intoxicated or very tired may fall asleep while sitting on the unit.
•Unplug when cleaning.
Not doing so may result in fire or electric shock.
•Use the low temperature for children and disabled.
High temperature may result in burns due to not
recognizing the temperature.
•Use this appliance on a toilet only.
Not doing so may result in fire, injury, or electric shock.
•Unplug if you do not plan to use for long periods of time.
•Unplug while there is a thunder or lightning.
•Be aware of urine splash on a nozzle or on a dry air outlet.
Doing so may result in unpleasant odor or failure of appliance.

10 11
MAIN UNIT & PARTS INSTALLATION
DO NOT PLUG IN UNTIL INSTALLATION IS FINISHED
COMPLETELY. NOT DOING SO MAY DAMAGE THE APPLIANCE.
IF ELECTRIC WORK IS NEEDED, PLEASE CONTACT TO THE
QUALIFIED ELECTRICIAN OR SERVICEMAN ONLY.
REMOVE THE EXISTING TOILET LID AND SEAT
•Remove the nuts, washers and cone packings from
the toilet seat mounting bolts in the back of the toilet.
•Remove the toilet seat, lid, and mounting bolts.
•Keep them in case of need.
TOILET SIZE (ELONGATED & ROUND FRONT)
•The toilet dimensions must be within those shown.
Do not install this appliance on a toilet that does
not meet those dimensional requirements.
OCCUPIED SENSOR
•This appliance is equipped
with an occupied sensor.
•Unit will not work unless
the seat is occupied.

12 13
1. HOW TO MOUNT
THE PLATE
•Place the plate and guides
over each mounting hole.
Insert the mounting bolts
through the plate and mounting
holes, and slide cone packings
and washers onto the bolts.
•Slide the unit until it
clicks onto the plate.
•Lift the unit up and
forward to detach.
2. HOW TO ATTACH AND
DETACH THE UNIT
INSTALLATION (CONT.)
1. Close the shutoff valve by turning it clockwise.
2. Then flush the water tank completely to empty it.
3. Remove the existing water supply hose from the water tank.
4. Install the T-valve on the water tank.
5. Connect one end of the water supply hose (7/8 to 3/8)
from the T-valve to the shutoff valve.
6. Connect the other end of the water supply hose (1/2 to 1/2)
from the T-valve to the main unit.
7. Open the shutoff valve by turning it counter clockwise.
8. Check for any water leaking or dripping.
2W ater tank
4
6
6
5
1
7
5
T-valve
Water supply hose
(7/8” to 3/8”)
Water supply hose
(1/2” to 1/2”)
Optional 1/2” Spare Nut
(Available by request)
To the unit
Main unit
NOTE:
This product is designed and intended for use exclusively with
Bio Bidet USPA water filters. The purchase or use of any other water filter is
not the responsibility of BBC Innovation LLC. As such, any use of non USPA
water filters is prohibited and will void the warranty for those Bio Bidet
products. Bio Bidet will not be responsible for any resulting damages or claims
related to the misuse or distribution of non Bio Bidet Uspa filters.
Using an In-line Carbon Filter
The use of an external in-line carbon water filter is not required unless the unit
is used in an area with extreme hard water. If a carbon filter is used, the filter
must be replaced every 6 months. in-line carbon filters can be purchased from
any authorized Bio Bidet reseller.

14 15
•Plug the power cord into the outlet, and then the water tank
will be filled with water in 2 minutes.
•Check all the functions. Cover the toilet using the sheet of plastic
wrap on the unit to prevent the washing water from being sprayed
out of the toilet. Then check for all functions described in this manual.
•There are possibilities of water coming out that
remains in the unit while heating.
•After installing your bidet attachment, check to see if
there is a gap between the toilet base and toilet seat.
•If necessary, place the bumpers on the
underside of your toilet seat as indicated above.
TESTING & SEAT BUMPERS OPERATION
CAUTION
All functions will be operational when the seat is occupied except
Nozzle Cleaning and Power/Economy.
Before operating, ensure that water tank is filled completely.
•When the power is plugged in initially, nozzles for feminine wash and
posterior wash will come out in turn.
•Before operating, ensure that the water tank is filled up completely.
STOP
•Press “Stop” to stop current operation.
•When a user stands up, all operations will stop automatically.
CLEANSING
•Press “Cleansing” to clean your posterior.
The function will stop in 1 minute automatically.
•Press this button again to activate oscillation. The nozzle
moves back and forth automatically to widen cleansing area.
•Oscillation wash stops if this button is pressed again.

16 17
BIDET
•Press “Bidet” for feminine wash.
The function will stop in 1 minute automatically.
•Press this button again to activate oscillation.
The nozzle moves back and forth automatically to widen cleansing area.
•Oscillation wash stops if this button is pressed again.
DRY
•Press Dry after Cleansing or Bidet. Warm air
will be emitted for 3 minutes.
•To alter the strength of air drying, press this button again.
KIDS
•Press “Kids” to change all functions to be suitable for children.
•1 minute of oscillation and 3 minutes for dry,
level 1 of water pressure and level 5 of nozzle position will be set.
•This unit should be used under the supervision of an adult.
AUTO
•Press “Auto” during “Cleansing” operation, wash, oscillating and dry
will operate for 20 seconds per each function. If Bidet Auto is wanted,
press “Bidet” and “Auto” consecutively.
AIR (AERATED SPRAY)
•Press “Air” to use aerated wash to clean.
Gentle delicate but strong water spray will save water consumption.
•Press this button again to release this function.
•“Cleansing” This function is always on.
OPERATION (CONT.)
PULSATION (MASSAGE)
•Press “Pulsation” to activate rhythmic wash for massage effect.
•Press “Pulsation” again to release this function.
NOZZLE POSITION
•Nozzle position can be adjusted by pressing the nozzle position buttons.
•Position will be initialized (level 3) after each use.
WATER PRESSURE/DRY TEMPERATURE
•Water spray pressure and temperature of dryer can be adjusted
by pressing arrows in 5 levels.
•Both levels will be initialized (level 3) after each of use.
TEMPERATURE ADJUSTMENT (WATER/SEAT)
•Temperature of seat and water can be adjusted.
•There are 4 levels, Room Temp, Low, Medium, High).
SILENT MODE
•To disable the beeping, press the hold the Posterior button on the
side panel without sitting on the seat for 2 to 3 seconds until you hear
a series of short beeps. To enable, repeat these steps until you hear a
single long beep.
SELF CLEANING
•This appliance automatically cleans its nozzles before and after each use.

18 19
OPERATION (CONT.)
ECONOMY
•Press “Economy” to activate the power saving function.
The unit will be in an economy mode after 1 hour of last use.
•In the economy mode, temperature of water and seat will be kept to
30C. Economy mark (bulb) on the remote control and green light in an
extra panel will be shown.
•When the unit is occupied during the economy mode, temperature will
be returned to original setting levels and goes back to economy mode
after 1 hour of last use.
•Press “Economy” again to release this function.
Red light will be turned on in the extra panel.
SELF-DIAGNOSIS SYSTEM
•This appliance has a self-diagnostic system, whenever the appliance has
a problem(s), the LED power light on the unit will start flashing.
•Unplug and contact service center immediately.
CLEANING
NOZZLE CLEANING
Do not forcefully push or pull the nozzles
or bend them. It may result in failure.
Make sure to use “Cleansing” button
on the remote control.
•Make sure the occupied sensor
is not activated. (Do not sit on
the seat or place hands on the
seat sensor).
•Press “FR” button on control panel.
Posterior (cleansing) nozzle comes
out. Press “BK” button on control
panel. Feminine (bidet) nozzle
comes out.
•Do not force to push or pull
the nozzles or bend them.
•Use a toothbrush or soft
cloth to clean nozzles.
•Press “Stop”, and nozzle will return
to stand-by mode. Beware of lost
tips. Do not retract nozzles without
a nozzle tip. It may result
in malfunction.
CLEANING THE BODY
•Regularly wipe off the body
with a dry soft cloth or sponge,
or wash with a damp cloth and
mild detergent.
•For care of plastic body, do
not use any cleansers such as
toilet cleanser, home cleanser,
bleach, benzene, paint thinner,
cresol, etc.

20 21
STRAINER MAINTENANCE
This appliance will not operate properly if the strainer is clogged.
Be sure to clean the strainer regularly.
•Close the shutoff valve by turning it clockwise.
•Unscrew the nut.
•Clean the strainer with a small brush.
•Re-screw the nut.
•Open the shutoff valve by turning it counter clockwise.
CLEANING (CONT.) MAINTENANCE
1. UNPLUG POWER
SUPPLY CORD
DRAINING WATER (WHILE NOT USING OVER
EXTENDED PERIOD OF TIME)
2. CLOSE SHUTOFF VALVE
3. UNSCREW MOUNTING
BOLTS
•Not doing so may cause fire.
•Refer to the installation method.

22 23
1. PLUG THE POWER CORD
IN PROPERLY
PREVENTING FREEZING
2. SET THE TEMPERATURE OF WATER
TO LOW OR MIDDLE
•Freezing can be preventedby thermal efficiency
of the water tank.
•If there is no heating system in the toilet, wrap pipes
with cloth or other materials.
3. DRAIN THE WATER
•If the unit has not been used for a long time during winter,
please unplug and drain the water from the water tank and
pipes thoroughly.
•Refer to the water drain method.
4. DRAIN WATER 5. INSTALL
•Uphold the appliance
and thoroughly drain the
water by unscrewing the
drain bolt. (beware of losing
the drain bolt.)
•The figure shown is only to
check the location of ‘Drain bolt’
To prevent malfunction, do not
place the vertical position or tilt
the product.
•Screw the drain bolt and
install the appliance.
•Refer to the trial operation
method in order to use this
appliance again.
MAINTENANCE (CONT.)

24 25
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Stops in the
middle of use
•Washing or drying
exceeded cycle time
•Skin sensor
lost contact
•Clogged nozzle tip
•Press the wash or
dry mode again
•Activate the skin sensor
with full skin contact
through the entire
cleansing period
•Clean the nozzle tip
Water
coming
out from
the nozzle
unexpectedly
•Self-cleaning •The unit will self-clean the
nozzle before and after
each use automatically.
Water
leaking
continuously
•Leaking from hose
connection at
the unit
•Leaking from
the T-valve
•Leaking from
behind or under
the tank.
•Check to make sure that all
rubber washers are in place
and do not over tighten the
connection but it should
be secure
•Check to make sure that
the rubber washer is in
place with the flat side
pointing up.
•Check that the drain is
not opened on the unit if
the unit continues to leak,
immediately disconnect it
from the water supply, drain
the tank, and contact
the BBC Innovation LLC
service center.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Unit
completely
fails to work
or power on
•Power outage
•Unit is not
plugged in
•Faulty receptacle
•Skin sensor is
not activated
•Reset the GFI outlet
•Plug the power cord
in to a GFI outlet
•Test another appliance
in the outlet
•Activate the skin sensor
on the unit
Nozzle •Remote control
is not working
•Nozzle is dirty
•External bidet filter
•Skin sensor is
not activated
•Seat riser is
covering the
skin sensor
•Replace the remote control
batteries. Try not tooperate
the unit with the side
control panel
•Clean the nozzle
•Remove the
external bidet filter
•Activate the skin
sensor on the unit
•The seat riser must go
underneath the bidet seat.
Low water
pressure
•Clogged nozzle tip
•Water pressure
is set to low
on remote
•Clean the nozzle tip
•Raise the water pressure
on the remote control
Seat is not
heating
•Unit is set on
Economy Mode
•Turn off the
Economy Mode
•Unplug the unit
for 10 seconds

26 27
SPECIFICATIONS
ITEM BB-600
Standard Power Supply AC 120V 60HZ 600W
Water Supply Spray for cleansing Direct connection to tap water
Water pressure 0.08MPa ~ 0.75 MPa
Cleansing Spray for cleansing 900 +/- 100ml/min
Spray for bidet 900 +/- 100ml/min
Water capacity 800ml
Spray temperature Room Temp ~ 40°C (104°F)
Heater capacity 600W
Safety feature Thermal switch, Temperature fuse,
Floating switch
Dry Air Temperature Room temp ~ 40°C (104°F)
Heater capacity 250W
Safety feature Temperature fuse
Heated Seat Seat temperature Room temp ~ 40°C (104°F)
Heater capacity 55W
Safety feature Temperature fuse
Circuit breaker Within 15mA 0.03 second
Length of power cord 1.2m
Dimensions (W) 466mm (18.34 inches) X
(L) 520mm (20.47 inches) X
(H) 145mm (6.71 inches)
Weight 4.4Kg (9.7lbs)
* Recommended water supply pressure are 0.1 ~ 0.69 MPa.
* The minimum available water supply pressure is 0.08 MPa however under
0.1 MPa pressure, water spray might not be adequate.

28 29
WARRANTY
BIO BIDET PERSONAL HYGIENE APPLIANCE
LIMITED WARRANTY
We warrant our products to be free from manufacturing defects under normal
use and service for a period of 3 years prorated base as below from the date
of your purchase.
•100% Coverage of all parts and labor for the entire
product for the first year from original date of purchase
•75% Coverage of all parts and labor for the entire
product for the second year from original date of purchase.
•50% Coverage of all parts labor for the entire
product for the third year from original date of purchase.
Warranty is valid within the United States and Canada only.
Our obligation to you under this warranty is limited to repair or replacement,
at our option, of defective products or parts, provided that the products
were properly installed and used in accordance with instructions. We reserve
the right to make inspections in order to determine the cause of the defect.
We will not charge for labor or parts in connection with warranty repairs or
replacement. We are not responsible for the cost of removal, return and/or re-
installation of products.
This limited warranty does not apply to:
•Damage or loss from a fire, earthquake, flood, storm, etc.
•Damage or loss resulting from any unreasonable use,
abuse, negligence, or improper maintenance.
•Damage or loss from improper installation, removal, or modification.
•Damage or loss resulting from sediment or other matters
contained in your water system.
This warranty gives you specific legal rights.
For warranty or service information, please contact your dealer where you
bought this appliance or Bio Bidet.
Only the original purchaser may submit a claim under this limited warranty.
This limited warranty is our only warranty covering your product.
Repair or replacement as provided under this warranty shall be the
exclusive remedy available to you. We shall not be responsible for loss of
the product or for other incidental, or consequential damage or expenses
you may incur or for labor or other costs due to installation or removal, or
cost of repairs by others, or for any other expense not specifically stated
above. Except to the extent prohibited by applicable law, any implied
warranties, including that of merchantability or fitness for use, are expressly
limited to the duration of this warranty.
WARNING! We are not responsible or liable for any failure of, or damage
to, this plumbing product or product component caused by in-tank bowl
cleaners containing chlorine (calcium hypochlorite).
NOTE: The use of high concentration of chlorine related products can
seriously damage the fittings. This damage can cause leakage and serious
property damage.
For more information, please contact your dealer or us.
BBC INNOVATION LLC
7900 S RT 31 Crystal Lake IL 60014
T: 847.458.2334
F: 847.854.1296
Email: [email protected]om
www.biobidet.com

Thank You
Technical Support/Customer Service
7900 S Route 31 Crystal Lake, IL 60014
T: 847.458.2334
U.S. TOLL FREE: 877.339.5214
[email protected]om
www.biobidet.com