BEMIS bioBidet Prodigy P700 User manual

OWNER’S MANUAL
PRODIGY

2 3
PRODUCT INFORMATION
Important Safeguards..............................................5
Safety Guidelines........................................................7
Functions.......................................................................9
Economy Features...................................................10
Parts..................................................................................11
Remote Control.........................................................13
PRODUCT OPERATION
Preparing for Use.....................................................15
How to Use..................................................................19
Maintenance...............................................................29
Troubleshooting........................................................31
Specifications............................................................37
WARRANTY
Warranty......................................................................39
TABLE OF CONTENTS

4 5
IMPORTANT SAFEGUARDS
When using electrical products, especially when children are
present, basic safety precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
DANGER - To reduce the risk of electrocution:
•Do not use while bathing.
•Do not place or store product where it can fall or be pulled into
a tub or sink.
•Do not place in or drop into water or other liquid.
•Do not reach for a product that has fallen into water. Unplug immediately.
WARNING - To reduce the risk of burns, electrocution,
fire, or injury to the persons
•Close supervision is necessary when this product is used by, on, or near
children or invalids.
•Use this product only for its intended use as described in this manual. Do
not use attachments not recommended by the manufacturer.
•Never operate this product if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged or dropped into
water. Return the product to a service center for examination and repair.
•Keep the cord away from heated surfaces.
•Never block the air openings of the product or place it on a soft surface
such as a bed or couch, where the air openings may be blocked. Keep
the air openings free of lint, hair, and the like.
•Never use while sleeping or drowsy.
•Never drop or insert any object into any opening or hose.
•Do not use outdoors or operate where aerosol (spray) products are
being used or where oxygen is being administered.
•Connect this product to a properly grounded outlet only.
See Grounding Instructions.
SAVE THESE INSTRUCTIONS
Grounding Instructions.
This product should be grounded. In the event of an electrical short circuit
grounding reduces the risk of electric shock by providing an escape wire for
the electric current. This product is equipped with a cord having a grounding
wire with a grounding plug. The plug must be plugged into an outlet that is
properly installed and grounded.
DANGER
Improper use of the grounding plug can result in a risk of electric shock. If
repair or replacement of the cord or plug is necessary, do not connect the
grounding wire to either flat blade terminal. The wire with insulation having an
outer surface that is green with or without yellow stripes is the grounding wire.
Check with a qualified electrician or serviceman if the grounding instructions
are not completely understood, or in doubt as to whether the product is
properly grounded.
This product is for use on a nominal 120V circuit, and has a grounding plug
illustrated in sketch A in Figure 1. A temporary adapter, which looks like the
adapter illustrated in sketches B and C, may be used to connected this plug
to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is
not available. The temporary adapter should be used only until a properly
grounded outlet (sketch A) can be installed by a qualified electrician. The
green colored rigid ear lug and the like extending from the adapter must be
connected to a permanent ground such as a properly grounded outlet box
cover. Whenever the adapter is used, it must be held in place by the screw.

6 7
SAFETY GUIDELINES
WARNING
The following actions are not recommended and can cause
product malfunctions and or safety hazards:
•Touching the power cord with wet hands.
•Placing fire sources near the product.
•Stepping on or placing heavy objects on the product.
•Blocking the dryer.
•Placing foreign objects into the toilet other than toilet paper.
•Cleaning the unit with harsh chemicals or detergents.
NOTICE
Observe electrical safety standards. Make sure the unit is properly grounded.
Discontinue use of the unit, unplug the power cable, and the shutoff valve in
any of the following circumstances:
•Water is leaking from the main body or from the hose connections.
•The product is broken, cracked, or producing an unusual sound.
•The product is overheating, or emitting smoke, or a foul odor.
Continued use of the unit when it is not functioning properly can cause leaks
or electric shock.
Connect the hose tightly to prevent leakage. If water leaks, close the shutoff
valve immediately.
Make sure the temperature of the bathroom does not fall under 40°F. When
water freezes, it can break the water supply line or internal components and
cause malfunctions.

8 9
FUNCTIONS
Function Descriptions
Standard Posterior Wash Cleanse posterior.
Feminine Wash Cleanse feminine area.
Enema Helps relieve constipation.
Dry Activates dryer.
Water Pressure Adjust water pressure.
Nozzle Position Adjust nozzle position.
Oscillating Cleanse with back and forth
nozzle movement.
Pulsating Rhythmic stream of water for
thorough cleansing.
Rhythm Combines oscillating and
pulsating features.
Seat Temperature Adjust seat temp.
Water Temp. Adjust water temp.
Dry Temp. Adjusts dryer temp.
Remote Control Operates all bidet functions.
Operation Light Indicates current operation.
(power, seat sensor, power saving,
seat temp, water temp)
Water
Saving
Full Flushing ~1.28 gallon flush*
Small Flushing ~0.83 gallon flush*
Function Descriptions
Comfort Deodorant Reduces bathroom odors.
Remote Control
Flushing
Full flashing and small flushing available
by remote control.
Auto Flushing Automatically flushes the toilet when
the user stands up.
Auto lid OPEN/
CLOSE (P770)
Stand in front of the toilet to
automatically open the lid. Move
away from the toilet to automatically
close the lid.
Night Light Automatic sensors detect motion
and activate the night light. This
function can be enabled or disabled
on the remote control.
Safety Power Saving Saves power when not in use.
Anti-short Circuit Automatically turns off power when a
short circuit occurs.
Burn Protecting Seat temp. turns off to protect user from
burns after 30 minutes of use.
Antibacterial The nozzle, seat and lid are specifically
coated to protect against bacteria.
Emergency Button Emergency button bypasses the
remote control. (power, posterior,
feminine, auto flush)
Manual Flush Button Activates a manual flush. Can be used
during a power failure.
Self Checking Automatically detects any
malfunctions before use.
Sanitary Nozzle Cleaning Automatically cleans nozzle before
& after use.
Nozzle button Extends nozzle for manual cleaning.
Anti Pollutant Coating The toilet bowl has a special
non-stick coating.

10 11
ECONOMY FEATURES PARTS
Power Saving Mode
•When active, the temperature
will be maintained at 86°F.
Using the seat disables this
feature for one hour.
Use the preferred
flush button.
•Save water
by pressing the
appropriate
flush button
for each use.
•Turn off the power
during extended
travel to save
energy. (2+ days)

12 13
REMOTE CONTROL

14 15
PREPARING FOR USE
NOTICE:
Turn off the power on the main body when replacing batteries or
cleaning the product.
1. Place the batteries into the remote control.
1. Remove the remote from the bracket by holding
both sides and lifting up.
2. Open the battery cover on the back.
3. Put 3 AA batteries in order.
4. Close the cover.
2. Proper Battery Care
Observe the following to prevent battery breakage or leaks.
•Remove batteries not using the remote control for a long time.
•Do not use rechargeable batteries.
•Settings (temperature, auto flush) may reset after replacing the batteries.
Configure the settings again.
Check if the power plug is connected.

16 17
3. Adjust water flow with the shutoff valve
•If the water pressure is too high, water may splash or overflow when
flushing the toilet.
•Turn the water shutoff valve clockwise to reduce pressure.
4. Check the display panel
1. Is the operation light on?
•If not on, press the Power
button to turn on the light.
2. Is the seat light on?
•If not on, open the remote
control cover and press Seat
Temperature to turn it on.
PREPARING FOR USE (CONT.)

18 19
HOW TO USE
1. Sit on the seat
•The sensor light will turn on.
•Only operates after being occupied.
2. Functions
•Press one of the cleansing
functions above on the
remote control.
•Adjust the nozzle position
and water pressure to your
preferred settings.
•Each function operates for
one minute.
•Dry operates dry feature for
3 minutes.
3. Stop
•Stop all cleaning and dry functions.
4. Flush
Optional Comfort Settings
1. Option 1: Oscillating
Nozzle moves back and forth to cleanse.
2. Option 2: Pulsating
Stream water more rhythmically.
1. Press the Posterior Wash or Feminine Wash button to wash.
2. Press the Oscillating Button to move the nozzle while washing.
3. Press the Oscillating button again to stop Oscillating.
1. Press the Posterior Wash or Feminine Wash button to wash.
2. Press the Pulsating Button to make the spray pulsate while washing.
3. Press the Pulsating button again to stop Pulsating.
1. Press the Posterior Wash or Feminine Wash button to wash.
2. Press the Pulsating Button to make the spray pulsate while washing.
3. Press the Pulsating button again to stop Pulsating.
Notice
Sit towards the center of the seat to prevent water from splashing.
3. Option 3: Rhythm
Combines oscillating and pulsating.

20 21
HOW TO USE (CONT.)
Adjusting Temperature
The temperature of the seat and dryer can be adjusted with
the remote control.
1. Open the remote
control cover.
2. Adjust the temperature
•Use the +/- button to
adjust the temperature of
the seat, water, and dryer
up to 3 levels.
Seat Temperature
Water Temperature
Dryer Temperature
Note
•When you activate the seat temperature, the seat light will be turned on
in the display area of the main body.
•When you activate the water temperature, the water light will be turned
on in the display area of the main body.

22 23
HOW TO USE (CONT.)
Adjusting and Using the Functions
The water pressure and nozzle position can be adjusted with the
remote control.
1. Adjust Water Pressure
•The water pressure can be adjusted
up to 5 different levels with up and
down buttons. Adjust the water pressure
to your preference.
2. Adjust Nozzle Position
•While using the Posterior or Feminine wash, press up or down button to
adjust the nozzle position to your body.
•The nozzle begins at the middle position each time you activate a wash.
3. Clean the Nozzle
•Press the Nozzle Cleaning button for
3 seconds to extend the nozzle without
sitting on the seat.
•Using a toothbrush, clean the nozzle
and press the Nozzle Cleaning button
again when finished.
4. Deodorant
•Press the Deodorant button to turn on the function.
•It deodorizes automatically when sitting. (It works for up to 20 minutes
while occupied, and another 1 minute after standing up.)
•Press the Deodorant button again to turn off the function.
5. Power Saving
•Press the Power Saving button to turn on the power saving light on the
main body.
•In power saving mode, the water temperature and seat temperature will
be maintained at 86°F
•To cancel the power saving mode, press the Power Saving button again
to turn off the display light.
•Power saving mode automatically turns off when seated and turns back
on when you stand up.

24 25
HOW TO USE (CONT.)
Seat and Lid Operation (P770 Only)
There are 2 ways to operate the seat and lid: Automatic and remote control.
2. Automatic Open/Close of Toilet Seat and Lid
•When you stand in front of the toilet, the lid automatically opens, and
when you move away from the toilet, the lid automatically closes.
1. Remote Controlled Open/Close of Toilet Seat and Lid
•Choose the seat or lid function by pressing the corresponding button on
the remote control.
Activate the automatic open/close feature on
your remote. (P770 Only)
•Press the auto lid button to turn the function on. The light indicates the
function is on. Press again to turn the function off.
Auto Seat and Lid open/close button.

26 27
HOW TO USE (CONT.)
Flushing
There are 3 ways to flush the toilet: Remote Control, Auto Flush,
and Manual Flush.
1. Remote Control Toilet Flush
•Press the full flush or small flush button on the remote control.
2. Auto Flush
•Press the Auto Flush button to turn the light on. The toilet will
automatically flush after standing up.
3. Manual Flush
•Press the Flush button on the control panel.
4. Bowl Cleaning
•Press the Bowl cleaning button for 3 seconds.
•Press the Flush button for 5 seconds.
•Press the Bowl Cleaning button again for 3 seconds.
Secondary
Main Body
Controls
•Bowl cleaning function cleans the inner
ceramic bowl.
•Flush functions jets high pressure water
to flush down debris in the bowl.

28 29
MAINTENANCE
Carefully read the following procedures.
Turn off the Auto Flush Feature before performing any maintenance.
Regular Maintenance
•Routine Cleaning- clean with a wet cloth.
•Deep Cleaning- Clean with a soft wet cloth and mild detergent.
Dry thoroughly after cleaning.
Do not use harsh detergents when cleaning to avoid discoloring.
OR: It is recommended to clean with the BioMist
Bidet Cleaner method.
Deodorizer Filter (as necessary)
Take the following steps when cleaning the deodorizer filter.
1. Remove the filter
•Locate the filter beneath the bidet and pull it forward.
2. Clean
•Using a toothbrush, remove dust particles from the filter.
3. Re-secure the filter
•Push the filter back until it clicks.
•Do not use without the filter.

30 31
TROUBLESHOOTING
If the product is not functioning properly, check the following troubleshooting
tips. If the problem persists, please contact Bio Bidet support department.
Power Supply
Trouble Possible Causes Solution
The unit is not
working.
Is the power out or
circuit breaker off?
Wait until the power is
restored, or turn on the
circuit breaker.
Is the operation light on
the display panel off?
Turn on the power in the
control panel of the main body.
Posterior Wash, Feminine Wash, Enema, Kid Function
Trouble Possible Causes Solution
Water is not
spraying out.
Is the shutoff valve closed? Open the valve
Is the seat sensor
being activated?
Make skin contact with
the seat sensor.
Is the hose crimped? Reposition the hose.
Water pressure is
too low
Is the water pressure
set too low?
Increase the water
pressure and clean
the nozzle
Is there any debris in
the hose?
Turn off the water
shutoff valve and clean
the hose out.
Water is cold. Is the temperature set to a
low level or turned off?
Adjust with the
+/- buttons on the
remote control.
Is power saving mode
turned on?
The water temperature is
set lower and increases
when seated.
Water stops
in the middle
of cleansing.
The cleaning functions
automatically and stops
after five minutes of use.
Press a cleansing function
button again.
Is the seat
sensor activated?
Make skin contact with
the seat sensor.
Water flows into
the toilet for a few
seconds near the
nozzle when first
sitting down.
When the seat sensor is
on, it releases some water
before spraying. If you
change the position while
seated, the sensor will turn
on and off, and release
some additional water.
-

32 33
TROUBLESHOOTING (CONT.)
Seat Sensor
Trouble Possible Causes Solution
The posterior
wash or
deodorant
function works
without sitting
on the seat
Is the seat
sensor blocked
with a wet towel?
Remove the wet towel.
Is the seat sensor wet? Wipe the water with
a dry cloth.
Heated Seat
Trouble Possible Causes Solution
The seat is
not warm.
Is the seat temperature
set too low?
Adjust seat temperature
with +/- buttons on the
remote control.
Is power saving mode
turned on?
The seat is kept at a lower
temperature until activated
Auto Flushing
Trouble Possible Causes Solution
Auto flushing is
not working
Is the auto flushing
turned off? (When off,
the flushing indication
on the remote control
display panel is off).
Press auto flushing button on
the remote control again to
turn it on.
Remote Control
Trouble Possible Causes Solution
Remote Control
is not working
Are the batteries
running low?
Replace old batteries with
new ones.
Are the batteries
inserted incorrectly?
Re-insert the
batteries correctly.
Is the transmitter or
receiver blocked?
Remove the objects
blocking transmitters.
Is the transmitter or
receiver dirty?
Wipe the affected
areas clean.
Is the seat
sensor activated?
Make skin contact with
the seat sensor.
Flushing by Remote Control
Trouble Possible Causes Solution
I can’t flush
the toilet with
remote control.
Are the batteries
running low?
Replace old batteries with
new ones.
Did you press the button
consecutively?
This function cannot be used
consecutively. You will need
to wait for about 10 seconds
for the next flush.
Is the transmitter or
receiver dirty?
Wipe the affected
areas clean.

34 35
TROUBLESHOOTING (CONT.)
Deodorization
Trouble Possible Causes Solution
Deodorizer is not
working at all.
Is the seat
sensor activated?
Refer to the location of
Seat Sensor on page 11.
Deodorizer is not
very effective.
Is the deodorizer
filter clogged?
Clean the deodorizer filter.
Deodorizer is not
working at all.
Is the main body light on? Set the deodorizer filter.
Drying
Trouble Possible Causes Solution
Dryer temperature
is too low.
Is the air temperature set
to a low level?
Adjust the air temperature
with the +/- buttons on the
remote control.
The dryer stops
in progress.
Did you activate
another function?
Press the Dry button again.
It may stop if the
user changes position
while sitting.
Refer to the location of
Seat Sensor on page 11.
The warm air
drying function is
not working at all.
Is the seat
sensor activated?
Refer to the location of the
Seat Sensor on page 11.
Power Saving
Trouble Possible Causes Solution
Power saving is
not working
Is it unplugged? Did you
change the batteries?
The setting may take
up to 24 hours to
function normally.
Did you change the
batteries? Did the
power go out?
Press the Power Saving
button or the Auto
On/Off button again
to turn it on.
Others
Trouble Possible Causes Solution
The toilet is not
flushing sufficiently.
Is the shutoff valve
open enough?
Open the shutoff
valve sufficiently.
Is there any debris in
the hose?
Turn off the water
shutoff valve and clean
out the hose.
There is no water
for flushing.
Is the water shutoff
valve closed?
Open the shutoff
valve sufficiently.
Is the water
supply suspended?
Wait until the water
supply is resumed.

36 37
SPECIFICATIONS
Model No. P700 P770
Rated Voltage Rated Voltage
Rated Power Consumption 703W
Power Cord Length 5 feet
Toilet Water
Consumption
Full Flush: ~ 1.28 gallons*
Small Flush: ~ 0.83 gallons*
Flushing System Siphon jet, Tornado flushing
Wash
Unit
Posterior Wash Max 0.31 gal/min
Feminine Wash Max 0.31 gal/min
Enema Max 0.31 gal/min
Water Temp. Adjustable 93°F - 104°F
Water Tank 0.31
Heater Capacity 600W
Safety Device Thermal cutoff, Overheating prevention circuit,
Temp. sensor
Heated
Seat
Seat Temp. Adjustable 93°F - 104°F
Heater Capacity 55W
Safety Device Thermal cutoff, Temperature sensor
Dry Hot Air Temp. Adjustable 93°F - 104°F
Heater Capacity 250W
Safety Device Thermal cutoff, Temp. overheat preventer
(manual recovery bimetal)
Deodorization Automatic deodorizer
Lighting LED light Auto LED light
Auto Lid - Auto lid
Water pressure Min: 1.5 kgf/cm2(0.15 Mpa) [with 20l/min flow]
Max: 7.5 kgf/cm2(0.75 Mpa)
Model No. P700 P770
Waterproof rating IPX4
Inlet water Temp. 41°F - 95°F
Ambient Temp. 41°F - 104°F
Dimension W 410mm x L 720mm x H 525mm
Weight 58 lbs (Bidet: 16 lbs,
Toilet: 42lbs)
59 lbs (Bidet: 17 lbs,
Toilet: 42lbs)
This marking shown on the product or its literature, indicates that
it should not be disposed with other household wastes at the end
of its working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources.
Household users should contact either the retailer where
they purchased this product, or their local government office,
for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the and
conditions of the purchase contract. This product should not be
mixed with other commercial wastes for disposal.
WEE Directive
Average results based upon fixed water pressure of 40 psi

38 39
We warrant our products to be free from manufacturing defects under
normal use and service for a period of time limited to 3 years from the
date of purchase.
This warranty covers 100% of all Bio Bidet parts and Bio Bidet labor costs
associated with the product.
Our obligation to you under this warranty is limited to parts, repair, or
replacement, at our option, of defective products or parts, provided the
products were properly installed and used in accordance with the instructions.
We reserve the right to make inspections in order to determine the cause of
any defects. We will not charge for labor or parts in connection with warranty
repairs or replacement performed by our technicians. We are not responsible
for the cost of removal, return, 3rd party repair services, and/or re-installation
of products.
This warranty does not apply to:
1. Damage or loss from a fire, earthquake, flood, etc.
2. Damage or loss resulting from any unreasonable use, abuse, negligence,
or improper maintenance.
3. Damage or loss from improper installation, removal,
repair, or modification.
4. Damage or loss resulting from sediment or other matters contained
in your water system.
WARRANTY
For more warranty service information, please contact Bio Bidet.
Only the original purchaser may submit a claim under this warranty.
This warranty is our only warranty covering your product. Repair or
replacement as provided under this warranty shall be the exclusive remedy
available to you. We shall not be responsible for the loss of the product or
other incidental or consequential damage or expenses you may incur, or for
labor or other costs due to installation, removal, third party repairs, or other
expenses not previously stated. Except to the extent prohibited by applicable,
any implied warranties, including that of merchantability or fitness for use, are
expressly limited to the duration of this warranty.
Please keep your purchase record to validate your warranty.
The following information may be necessary for various services:
Purchaser Name, Address, Telephone Number, Product Model, Purchaser Date.
Support agents are available Mon-Fri, 9:00 AM - 5:00 PM CST