BEMIS bioBidet Pearl S400 User manual

USER MANUAL
S400
Pearl S400
Bidet Attachment

Table of Contents
Features
Dimensions
Pre Installation
How to use the S400
1

2
FEATURES
Relaxed Fit Panel
Comfort Grip Control Dial

3

4
DIMENSIONS
0.236

5
PREINSTALLATION
Step 1
INSTALLING THE S400
Please be advised that the provided T-Valve
should be installed at the fill valve under the
toilet tank,NOT down at the water supply
coming from the wall.
If you do not have access to the fill valve under
the toilet tank,contact Biobidet Customer Service
at 847.458.2334 and we may be able to provide
alternative fittings.
Check Water Supply Line
Inspect your current water supply line that connects to the toilet
tank fill valve to ensure it is a flexible water supply hose. If it is a rigid
pupe, you will need to purchase a flexible water supply hose before
installing the bidet. The hose needs to be 7/8” (to connect to the
T-valve we provided) on one end end either 3/8” or 1/2” depending
on your wall valve, on the other end.
1. Remove the existing toilet seat by locating the
bolts and nuts, typically under a plastic cover,
and removing them first.

6
INSTALLING THE S400 (cont.)
2.Close the water supply valve and flush the toilet
completely so that there is little to no water left in
the toilet tank.
3.Disconnect the water hose from underneath the
toilet tank.
4. Connect the 7/8”T-valve to the toilet fill valve
where you just removed the water hose from.
a. Make sure the rubber washer is properly
seated and the narrow side is up.
5. Attach the water supply hose that comes from
the water shut off to the bottom of the T-Valve.
Step 2
Step 3
Step 4
Step 5

7
INSTALLING THE S400 (cont.)
6. Connect the metal hose we supplied to the open
side of the T-valve.
7. Insert the rubber non-slip mats to the bottom of
the bidet and place the circular mounting
brackets into the bidet attachment.
8. Place the bidet on the toilet with the mounting
brackets over the mounting bolt holes and make
any needed adjustments to make sure the bidet
is centered on the toilet and so you can see the
mounting bolt holes through the mounting brackets
of the bidet.
Step 7
Step 8
Step 6

8
INSTALLING THE S400 (cont.)
9.Place the toilet seat back on the toilet over the
bidet and secure the bolts down so that the seat
and bidet attachment are stable.
10.Connect the hose from step 6 to the bidet
water connection underneath the handle
of the bidet.
11.Slowly turn the water supply valve back on
and check for leaks and test the unit for
functionality.
Note:
If any leaks occur, check all rubber washers and make sure all
connections are tight and secure.
12. If there are no immediate leaks, check again
in about 5-10 minutes and your bidet is ready
for use!
Step 9
Step 11
Step 10

9
HOW TO USE THE S400
For back wash turn the control knob to
front/feminine
days it is highly recommended
that the water supply valve is turned off.
CLEANING THE S400
Your S400 is made with a higher grade fire-retardant ABS resin. Using hard
cleaning chemicals can weaken the material causing it to damage and develop
cracks.
Clean the bidet by wiping the surface area with a damp cloth regularly.
Do not use harsh detergents or any clenaing tools with bristles on your bidet.
Steam cleaning is the preferred cleaning method for your bidet. For a deep,
chemical free clean, consider the BioMist Bidet Cleaner.

10
Warranty
Your Bio Bidet is warranted against defects in materials or workmanship for
one (1) year from the date of original purchase. Defective parts or a defective
product retuned to Bio bidet will be repaired with new or comparable rebuilt parts,
or exchanged for a refurbished Bio Bidet product as determined by Bio Bidet in
their sole discretion.
This limited warranty given by Bio Bidet covers all defects
encountered in normal use of this Bio Bidet product, and
does not apply in the following cases:
1. Loss or damage of the product due to abuse, misuse, tampering, mishandling,
improper packaging by you, alteration, and failure to follow operating instructions.
2. Use of parts or supplies (other than those provided by Bio Bidet dealers) that
cause damage to the product.
3. Replacement of discolored or stained parts caused by chlorine, bleach, amonia,
and other chemicals, cleaning supplies, oxidation, normal wear and tear.
4. Damage to or malfunction of the unit as a result of improper and negligent
installation.
5. Any and all damges to plumbing, walls, floors, ceiling, and personal property
resulting from water leaks or breakage. The product must be used at the user’s
own risk. Therefore, the owner hereby releases the manufacturer and distributor
from any and all claims for damages where the above condition exists.
No implied warranty, including any implied warranty of merchantibility or fitness or a
particular purpose, applies to BBC Innovation products after the applicable period
of the express limited warranty or guarantee, except as mentioned above, given by
any person or entity with respect to Bio Bidet shall bind Bio Bidet (Some states and
provinces do not allow limitations on how long an implied warranty, so the above
limitation may not apply to you). BBC Innovation shall not be liable for revenues or
profits, inconvenience, expense or substitute equipment or service, or any other
special, incidental, or consequential damages caused by the use or misuse of,
or inability to use, Bio bidet, regardless of the possibility and foresee-ability of
such damages. In no event shall recovery of any kind against BBC Innovation be
greater in amount than the purchase price of the product and causing the alleged
damage. Without limiting the foregoing, you assume all risk and liability for loss,
damage, or injury to you and your property and to others and their property arising
out of use or misuse of, or inability to use, the Bio Bidet not caused directly by the
negligence or BBC Innovation. This limited warranty shall not extend to anyone
other than the original purchase of the Bio Bidet product.

11
Technical Support/Customer Service
Bio Bidet
7900 S IL Route 31 Crystal Lake IL 60014
T: 847-458-2334
Toll Free: 877-339-5214
[email protected]
www.biobidet.com