BEMIS NextStep User manual

Installation
1. Insert bolts.
2. Attach nuts.
3. Tighten.
4. Unlock hinge.
5. Hold in unlock position and snap in place.
6. Lock hinge.

NextStep®Installation Instructions
x2
x2
IMPORTANT
Read instructions first for proper
installation.
or/o/ou
1/2”
(1.3 cm)
1/2”
(1.3 cm)
Includes Tools Needed
Installation
2 31
5
1
1
2
6
4
Unlock hinge. Turn seat overInsert bolts.
Lock hinge. Attach nuts. Finger-tighten.Place seat on bowl.

IMPORTANT
Ensure seat is centered on bowl
before proceeding.
7
10
ÀÊÃi>ÌÃÊÜÌÊ7ëiÀUÃi®
After installation, raise and lower the
cover and ring to activate the slow-close
modules.
9
8
1
2
11
1
2
12
Cont./Cont./Suite
Raise lid.Tighten lower section of STA-TITE® nuts
until they snap off.
Snap in child seat. Lower child seat; close lid. To use, raise lid. Lower child seat.

Insert bolts
1
Attach nuts
1
1
2
2
Tighten
3
Unlock hinge
4
5
Hold in unlock position and
snap in place Lock hinge
6
For easy cleaning and
replacement, reference
steps 4, 5 and 6
Hardware kit includes Tools required
x2
x2

Installation Instructions
x2
x2
IMPORTANT
Read instructions first for proper
installation.
or/o/ou
1/2”
(13 mm)
1/2”
(13 mm)
Includes Tools Needed
Installation
2 31
5
1
1
2
6
4
1B5991783
Flip up hinge caps. Turn seat over Insert bolts.
Close hinge caps. Attach nuts. Finger-tighten.Place seat on bowl.

Installation Instructions
x2
x2
IMPORTANT
Read instructions first for proper
installation.
or/o/ou
1/2”
(13 mm)
1/2”
(13 mm)
Includes Tools Needed
Installation
2 31
5
1
1
2
6
4
1B5991783
Flip up hinge caps. Turn seat over Insert bolts.
Close hinge caps. Attach nuts. Finger-tighten.Place seat on bowl.

Ensure seat is centered on bowl
before proceeding.
IMPORTANT
7
9
8
Cont.
10
1
2
11
1
2
For seats with Whisper•Close®
After installation, raise and lower the
cover and ring to activate the slow-close
modules.
1
2
Operation/Operación/Utilisation
Insert child seat in upright position. Lower child seat; close lid.
To remove child ring, place in up-
right position and lift.
To use, raise lid. Lower child seat.
As you hold seat centered on bowl,
tighten lower section of STA-TITE®nuts
until they snap off.
Raise lid.
Do Not Stand On Cover

Ensure seat is centered on bowl
before proceeding.
IMPORTANT
7
9
8
Cont.
10
1
2
11
1
2
For seats with Whisper•Close®
After installation, raise and lower the
cover and ring to activate the slow-close
modules.
1
2
Operation
Insert child seat in upright position. Lower child seat; close lid.
To remove child ring, place in up-
right position and lift.
To use, raise lid. Lower child seat.
As you hold seat centered on bowl,
tighten lower section of STA-TITE®nuts
until they snap off.
Raise lid.
Do Not Stand On Cover

Thread bolt into hinge
Push bushing onto bolt Place seat on bowl Attach nuts, Finger-tighten
As you hold seat centered
on bowl, tighten lower
section of STA-TITE® nuts
until they snap off
Hardware kit includes Tools required
or/o/ou
1/2”
(1.3 cm)
1/2”
(1.3 cm)
x2
x2
x2
23
1
1
1
4
2
5

Place washer and seat
on bowl
Hardware kit includes Tools required
or/o/ou
1/2”
(1.3 cm)
1/2”
(1.3 cm)
Attach nuts and nger-
tighten, keeping washer
aligned with the hinge
body
x2
x2
x2
x2
1
Thread bolt into hinge
2
Push bushing onto bolt
1
2
1
2
3
1
1
4
2
5
As you hold seat centered
on bowl, tighten lower
section of STA-TITE® nuts
until they snap off

Flip up hinge caps
Turn seat over Insert bolts Push down hinge caps
Hardware kit includes
El
Tools required
or/o/ou
1/2”
(1.3 cm)
1/2”
(1.3 cm)
x2
x2
1
3
24
7
5
1
1
6
2
Place seat on bowl Attach nuts, finger-tighten
As you hold seat
centered on bowl,
tighten lower section
of STA-TITE® nuts
until they snap off
Feel the difference with Mayfair. Looking for boat plumbing products? Visit our website.