L.L.Bean ALL WEATHER ADIRONDACK User manual

1 of 3
ALL WEATHER ADIRONDACK CHAIR
Thank you for purchasing our All Weather Adirondack Chair.
Assembly of this product requires a 4mm hex key which is
included, and a 7/16” wrench.
Wehavefound it helpful to have a second person present in at
least one step ofthe assembly
STEP 1
Read through these instructionsthoroughly before beginning
assembly. We havefound this to be of great value when first
assembling this product.
STEP 2
Remove all parts and hardware from packing material. Pieces
should be placed on a non abrasive surface (like the carton or
carpet) to prevent damage to the finish.
STEP 3
Identify all parts using assembly instructions on next page
STEP 4
Identify and count hardware using assembly instructions on next
page.

Qty.
into pre-drill holes
Unfold chair assembly
Step 1
Step 1
TOOLS NEEDED
Insert pins into large holes
Step 3
- 4mm hex key
Assembly Instructions
2
- 7/16 wrench
Step 2
¼
Model: All Weather Adirondack Chair
A - Pin
2
2
2
6/25/09
Step 2
" BoltB - 2
Insert (2) 2¼" bolts, washers and locknuts
Description
nut
B - 1/4" Washer
B - 1/4" Lock nut
leg
bolt
washer
Correct
B
B
A
A
Incorrect

3 of 3
Care
This material is made of HDPE plastic resin that
has been purified and UV protected. It is generally
cared for and cleaned with soap and warm water.
For certain stains and additional cleaning power, a
1/3 bleach and 2/3 water solution can be used on
the product without affecting the color. Also, a
popular method of cleaning is a high-pressure
power wash. (Not to exceed 1,500 psi, which is
the equivalent of a car wash.) The surface
characteristics of the product may require the use
of a soft bristle brush to get into the creases.
The hardware used in the assembly and
construction of our furniture is 300 series
commercial grade stainless steel that has an
additional “Xylan” protective and cosmetic coating.
Although the quality of the hardware has a high
level of corrosive resistance, the hardware can
show some signs of corrosion in salt air
environments.
A practical solution to these signs of corrosion is to
wash the product with soap and water, using a soft
bristle brush to scrub the corroding areas of the
hardware. Also, use appliance touch up paint in
the appropriate color to protect the hardware.
Appliance touch up paint can be purchased at
local hardware stores.
www.llbean.com
Product Support 1 800 341 4341