Bosch SOLUTION ULTIMA User manual

1
INSTRUCTIONS
MANUAL
SOLUTION ULTIMA
V. 2019.001

SOLUTION ULTIMA

How to arm and disarm system
Enter code and away. To disarm enter code and AWAY
Adding a key fob to the system
Enter code (XXXX) and press 1 and then press the AWAY button.
Enter the number you want to allocate to the key fob from (9-16) and the press AW AY.
Enter the ID number found at the back of the key fob (9 digits) and press AW AY.
Changing or adding a user code
Enter master code (XXXX) and press 1 and then press the AWAY button.
Enter the user number that you want to allocate the new code to (1-8) and press AW AY.
Enter the new code (4 digits) and press AWAY.
Deleting a user code
Enter master code (XXXX) and press 1 and then press the AWAY button.
Enter the user number you want to delete (example 2)
Press stay to delete user.
How to check a fault
Press and hold button 5 to enter fault mode
The zone indicator will display a number referring to the table below:

Keep in Mind! Service your alarm every year to make sure that the
system is functioning properly.