Bretford Basics TC12FF-BK User manual

BRETFORD BASICS™
MULTIMEDIA PRESENTATION CART
MULTIMEDIA PRESENTATION CART
TC12 provides room for a projector and presentation
materials on the top shelf and two pull out shelves
for a laptop and document camera.
FEATURES
• Ideal for interactive presentations and instructional use. Provides room for a data projector, notebook computer, document camera, DVD
player, and scanner.
• Spacious cord management bin organizes all power and data wires and may be equipped with an optional 4-outlet electrical unit. Electrical
unit is standard on TC12FF model.
• Pull-out shelves are located on both the left and right and are 14"d x 20-3/4"w x 37"h for standing use.
• Heavy-duty 1" square tubular legs with “W” bracket shelf design for maximum strength.
• All-steel construction with die pressed shelves.
• 4" Quiet-Glide stem casters, two are locking. Each caster is load rated to 115 lbs.
• TC12FF includes a surge protected, 4-outlet electrical assembly with on/off switch and 20’ grounded power cord. Electrical unit mounts
inside the cord management bin.
• Constructed using an average 30% post-consumer recycled steel content and finished in environmentally friendly powder paint. Steel
construction is 100% recyclable at the end of the product life cycle.
TC12-BK

11000 SEYMOUR AVENUE
FRANKLIN PARK, ILLINOIS 60131 USA
TOLL FREE PHONE [phone]
PHONE [phone]
TOLL FREE FAX [phone]
FAX [phone]
WWW.BRETFORD.COM
©2002 Bretford / b_tech_cart_tc12 / 07.08
DIMENSIONS
TC12 Overall: 32"w x 24"d x 42"h
Cord Bin: 4-1/2"d x 10"h x 30"w
Pull Out Shelves: 14"d x 20-3/4"w
Pull Out Shelves to Floor: 37"h
Pull Out Shelves to Top Shelf: 3-1/4"h
COLOR & FINISH
Black (-BK) powder paint
WEIGHT, FREIGHT CLASS AND UPC CODE
TC12-BK: 82 lbs., Freight class 70 UPS
0 96633 27642 4
TC12FF-BK: 86 lbs., Freight class 70 UPS
0 96633 27643 1
Both ship ready to assemble in one (1) carton pack and are available
to ship via LTL truck or UPS.
CARTON DIMENSIONS
TC12 & TC12FF: 40"w x 28"d x 8-1/2"h
ACCESSORIES
CFPS - 4 Outlet Electrical Unit (inc. on FF models) - 0 96633 10076 7
UCSE10 - 10 Outlet Electrical Unit - 0 96633 11038 4
MADE IN THE USA
TC series carts are made at Bretford’s Chicago area manufacturing
facility using union labor.
CART ASSEMBLY SPECIFICATIONS
TC12 Technology Carts have one (1) 32"w x 24"d, 18-gauge steel top
shelf with 20-gauge steel stiffener and one (1) 32"w x 24"d, 18-gauge
steel bottom shelf. Shelf corners are open so the sides of the shelf do
not connect. The legs fit flush to the shelf and attach with a “W”
bracket design that interlocks the legs and shelves for maximum
strength and stability. Each corner has a 13-gauge steel “W”
mounting bracket with 1⁄4" square head bolts and hex nuts that hold
leg securely to table. Legs are 18-gauge, 1" square tubular steel 37-
1⁄4" long. Each leg has a hard plastic caster insert mounted in the
bottom of the tube. Include two (2) 14"d x 20-3/4"w, 18-gauge steel
pull-out shelves that extend off the left and right sides. Pull out
shelves are set at 37" standing height. One (1) 18-gauge steel cord
organizer bin of dimensions 30"w x 10"h x 5"d overall attaches
between the rear legs of the cart. Cord bin has four (4) 5" x 1⁄4" slots
at the top of the back panel and two (2) slots of the same
dimensions, one down each side. Model TC12FF includes a surge
protected 4-outlet electrical assembly with on/off switch and 20' 3-
wire cord and two (2) 3⁄16" diameter machine screws with nuts for
attaching unit to the cord management bin. Constructed with
“prime” steel which has a 25% to 35% post-consumer recycled
content. Stem casters are mar-resistant, hard black rubber, 4" in
diameter. Each caster assembly has ball bearing swivel capabilities,
steel construction and is load rated for 115 lbs each. Two (2) have
locking brakes. Finished in Black (-BK) powder paint. Ships knocked
down (KD) via truck LTL class 70 or via UPS.
Shelves pushed in for storage.