Bretford CUBE Transport Cart 30 User manual

!
031-11148
Rev. 1
of1 8
CUBE Transport™Cart!
User Guide
®

!
031-11148
Rev. 1
of2 8
About Your Product
Product Overview - Front View!
The CUBE Transport provides charging & mobility for up to 30 devices.
Device
Slots
Power Adapter
Storage Area
Cable Boss™
Cord Management
Swivel
Casters
Locking
Casters

!
031-11148
Rev. 1
of3 8
About Your Product
Product Overview - Rear View!
Power Cord &
Cord-winder
Power
Switch

!
031-11148
Rev. 1
of4 8
About Your Product
Technical Specifications!
CUBE Transport Cart 30
Model
TVCT30AC
Outer Dimensions !
(W x D x H)
28.75ʺx 18.0ʺx 37ʺ/ 73.0cm x 45.7cm x 94.0cm
Slot Dimensions !
(W x D x H)
1.4ʺx 14ʺx 9.9ʺ/ 3.2cm x 35.6cm x 25.1cm
Capacity
30 devices
Weight (empty)
80lb / 36.3kg
Rating
120V, 12A max. 50-60Hz AC
Charging
Supports device power adapters up to 48W each, or 1,440W total
Warranty
For the latest information, please visit bretford.com/warranty.
Certifications

!
031-11148
Rev. 1
of5 8
Using Your Product
Wiring CUBE Transport Cart!
Before you begin, ensure the unit is off and unplugged from the wall.
1. Place your devices into the slots provided.
2. From the front of the cart, plug each of your device power adapters
into the AC outlets, located at the back of the power adapter
storage area.

!
031-11148
Rev. 1
of6 8
Using Your Product
Wiring CUBE Transport Cart
3. Connect each device to its respective
power adapter and secure the cords
using the Cable Boss™cord
management features on the front of
the cart. Alternate between wiring
devices on the top shelf and wiring
devices on the bottom shelf.
4. Manage and organize excess cord
lengths in the power adapter storage
area, as necessary.
5. Connect the main CUBE Transport
Cart power cable into the wall.
6. Toggle the power switch on
(“RESET").

031-11148
Rev. 1
of7 8
Important Information
Safety Notice
•Product for indoor use only
•Ensure the power switch is in the OFF position and CUBE Transport
Cart is disconnected from the wall outlet before plugging devices into
e-unit.
•Do not plug the unit in if the switch or power cord has been damaged.
•Unplug unit from the wall before moving to a different location.
•The socket-outlet shall be installed near the equipment and shall be
easily accessible.
•For safety purposes, make sure all electrical components do not
exceed the maximum load rating of 12 amps.
•Arranging devices in the cart should be such that a hazardous
condition is not achieved due to uneven mechanical loading.

031-11148
Rev. 1
of8 8
Additional Resources
Contact Support
Technical support is available by contacting Bretford Customer Care via
phone, email or the web:
Hours of Operation: M-F, 7:30am - 4:30pm CST
Telephone: [phone]
Email: [e-mail]
Website: www.bretford.com/contact
Bretford, CUBE, CUBE Transport and the B design are trademarks or registered marks of Bretford
Manufacturing, Inc. Patents pending. © 2020 Bretford Manufacturing, Inc. All rights reserved.