BROSA Chablis Outdoor Dining Table User manual

ASSEMBLY GUIDE
Chablis Outdoor Dining Table
v1.0

Leg x 2
Leg Corner x 2
Stretcher x 2
Table Top x 1
Hardware
What you need
A x 4
(Short Hex Bolt)
(Spec: M8x55)
B x 4
(Medium Hex Bolt)
(Spec: M8x120)
C x 2
(Long Hex Bolt)
(Spec: M8x130)
D x 4
(Bolt)
(Spec: M8x40)
E x 10
(Washer)
(Spec: 16x8.5x1)
F x 10
(Bolt Cover)
G x 1
(Allen key)
H x 1
(Spanner)
Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit www.brosa.com.au/pages/product-return-and-parts-request
and we’ll sort it out right away.

Step 1 Align a leg to the underside of the table so that the
bolt holes are overlapping. Fit a washer (E) to a short
hex bolt (A) and screw into the bottom side holes
using a spanner (H). Fit a washer (E) to a medium hex
bolt (B) and screw into the upper holes using a span-
ner (H). Put covers (F) on all hex bolt heads.
A x 2
F
E
B
H
F
E
H
A
B x 2
E x 4
F x 4
H x 1
Step 2 Align the stretcher to the xed leg. Fit a washer (E) to
a long hex bolt (C) and screw into the central hole
using a spanner (H). Put a cover (F) on the hex bolt
head. Align the second leg to the spanner.
C x 1
E x 1
F x 1
H x 1
B
F
E
H

Step 3 Symmetrical to the rst leg, t a washer (E) to a short
hex bolt (A) and screw into the bottom side holes
using a spanner (H). Fit a washer (E) to a medium hex
bolt (B) and screw into the upper holes using a span-
ner (H). Put covers (F) on all hex bolt heads.
A x 2
F
E
B
H
F
E
H
A
B x 2
E x 4
F x 4
H x 1
Step 4 Align the leg corners to the legs and x with two
bolts (D) using an allen key (G). Repeat for the other
corner.
D x 4
G x 1
D
G

Step 5 Gently lift the table and place upright on a level
surface. Enjoy your new table!