BROSA Caledonia Rattan Compact Chest of Drawers User manual

Caledonia Rattan
Compact Chest of Drawers
A S S E M B LY GU I D E
V1

FOR YOUR SAFETY
Lift, don’t drag. This protects
your floor and product.
Avoid loose screws. Tighten
fixtures every few months.
Assembly requires 2 people.
It's always easier with a
friend.
Contact our support online
or call 1300 027 672.
Check the assembly guide
for required components.
?
Assembling this product on
a soft surface protects its
finish.

Components
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
Hardware
A x 6
(M6 x 40)
B x 6
(Ø8 x Ø25)
C x 6
(Ø8 x Ø16)
D x 1
(M4)
Body x 1
①
Leg Frame x 2
②

Step 1 Align the leg frames ②with the holes on the
bottom of the body ①. Make sure the stickers
match as per the diagram below.
Fit a spring washer C to a bolt A followed by a flat
washer B. Insert the bolt into a hole on the leg
frame. Screw the bolt with your hand and leave it
loosely attached. Repeat this for all holes on the
leg frames.
A x 6
B x 6
C x 6
A
B
C
②
①

Step 2 Once all leg frames are fixed in place, tighten all
bolts with the Allen key D.
D x 1
D

Step 3 Place the completed piece of furniture the right
way up in its desired location.
Adjust the foot stoppers to make all legs sit firmly
on the ground.

Step 4 Enjoy your new Caledonia Rattan Compact Chest
of Drawers!

Serious or fatal crushing injuries can occur from furniture tip-over.
Never allow children to climb or play on furniture.
Warning

It is STRONGLY RECOMMENDED to install anti-tip kit to avoid furniture
tip-over.
Anti-Tip Kit Installation
Hardware
Wall Fixings
a x 4 b x 2 cx 4 dx 4 ex 4
Wood
If fixing to wood
make sure that it
isn’t chipboard as
screws can easily
pull away from the
core structure.
Brick or Masonry
Use an appropriate
wall plug provided
you are sure your
wall is sound.
Cavity Wall
Special toggle wall
plugs are needed.
Seek expert
advice.
Because of the variety of wall compositions, we can’t provide you with
appropriate wall fixings. Please identify your wall composition and
contact your local hardware store to get the appropriate fixings.

What You Need
Attach the brackets a securely to the back top of the
unit using the short screws cprovided.
Step 1
ax 2
cx 4
ac