BROSA Pau Armchair User manual

ASSEMBLY GUIDE
Pau Armchair
v1.0

Components
Unpacking
Upon unpacking your armchair from it’s delivery box, you should have the
body of the armchair. Additional components are packed inside the body, you
will learn how to access and utilise these components in the next steps.
Turn the armchair body so that the underside is facing you. Follow the
coloured string to the component compartment. Open this and take out the
additional components.
Armchair body
Armchair body
A x 2 (Front Leg)
B x 2 (Back Leg) C x 1 (Cover Fabric)
Hardware
F x 8
D x 1 E x 8
What you need

Step 1
Step 2 Remove the protecting strip from the edge of the
armchair and cover the bottom with the fabric (C).
Place the armchair body on a level surface with the
bottom side facing up. Place a back leg (B) into the
back opening of the armchair, making sure the screw
holes are aligned. Fit a washer (E) to a bolt (F) and
screw into a hole using allen key (D). Repeat for the
second bolt to secure the leg in it’s place. Repeat for
for the second back leg and then front legs (A).
F X 8
D x 1
E x 8
D
E
F
A
A
B
B

Step 3 Gently lift the armchair and place upright on a level
surface. Enjoy your new armchair!