BROSA Marin Round Dining Table User manual

Marin Round
Dining Table
A S S E M B LY GU I D E
V3

FOR YOUR SAFETY
Lift, don’t drag. This protects
your floor and product.
Avoid loose screws. Tighten
fixtures every few months.
Assembly requires 2 people.
It's always easier with a
friend.
Contact our support online
or call 1300 027 672.
Check the assembly guide
for required components.
?
Assembling this product on
a soft surface protects its
finish.

Components
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
Table Top x 1 (See Step 1, Step 2 for access.)
①
Hardware
What You Need
C x 1
(M4)
A x 6
(M6 x 65)
B x 6
(M6)
Upper Leg x 1Lower Leg x 1
② ③

Step 1 Upon unpacking your shipping carton, you should
have the cement table top fixed and secured by
the wooden crate. Untighten the screws fastening
the slats together to disassemble the crate.
Cement is a relatively fragile material. To prevent the cement table top
from damage during transportation, an extra wooden crate has been
applied. Please follow Step 1 and Step 2 below to unpack the table
top.

Step 2 Remove all the wooden slats so that the inner box
is separated from the crate.

Step 3 Fit the upper leg ③ and lower leg ②together as
shown in the diagram below.
③
②

Step 4 Gently place the table top ① on a flat soft sur-
face with the bottom facing upward. Align the
structure formed in Step 3 with the bottom of the
table top and make sure the bolt holes on each
side overlap.
Fit a washer B to a bolt A and insert the bolt into
a hole. Tighten the bolt with your hand until it is
finger-tight. Repeat this for the remaining holes.
A x 6
B x 6
A
B
①

Step 5 Tighten all bolts with the Allen key.
C x 1
C

Step 6 Lift the completed piece of furniture off the
ground and place it upright on a level surface.
Enjoy your new Marin Round Dining Table!

The maximum loading weight for the table is 80kg. Please do NOT
overuse it with an exceeded weight.
Warning
MAX.
80 KG

User Recommendation
Assembly
1. Assemble furniture using our Assembly Guides. You can find them at
support.brosa.com
2. Do not dispose of any packaging or contents of the shipping carton
until assembly is completed to avoid accidentally discarding small
parts or hardware.
Material
Cement is, by nature, a porous and organic material that, over time, will
age naturally and take on a patina. It is this ageing and character that
offers such a unique and longstanding impact for those who enjoy its
look.
Placement
1. This product is for indoor use only.
2. Keep furniture on flat, level ground. Placing it unevenly may cause
deformation.
3. Do not place heavy objects on furniture.
4. When repositioning furniture always lift, don’t drag.
5. Keep sharp objects away. They cause scratches to the cement.
6. Do not stack furniture.
Cleaning and Maintenance
1. Clean furniture regularly with a white soft cloth. Slightly damp fabrics
help absorb dust, but remember to dry it once you’re done.
2. Clean spills and stains immediately with a clean cloth. As long as
you’re on hand to wipe up any spills straight away, you shouldn’t
encounter any problems.
3. Keep liquids away as they may damage the finishing.
4. Avoid harsh cleaning chemicals such as alcohol or gasoline
solvents. Avoid using sponges or dirty cloths.
5. Cover furniture that isn’t being used to protect from dust and
ageing.
6. Re-tighten screws and attachments if they loosen.

Exposure
1. Use protective coasters and mats for hot items on the furniture.
2. Keep furniture away from intense direct sunlight. Exposure can
cause cracks or discolouration.
3. Severe changes in temperature and humidity can accelerate ageing.
Keep furniture at least 60cm from heating or air conditioning.
4. Do not place furniture near open flames.