BROSA Mia Entertainment Unit User manual

ASSEMBLY GUIDE
Mia Entertainment Unit
v1.0

Components
Upon unpacking your table from it’s delivery box, you should have the pieces
shown below. Follow the steps on the next pages to assemble your new table.
20MIN

Step 1
A x 4
1.1 Insert cross dowels (A) into the legs (2) by placing each
dowel (A) into the holes on top of each leg (2). Ensure the
horizontal marking on each tting is facing as shown.
1.2 Screw threaded bolts (B) into cross dowels (A) that are
already concealed in the legs (2) as shown. Continue to
re-tighten until threaded bolts (B) are securely fastened.
B x 4
Step 1.1
Step 1.2

Step 2 2.1 Lay drawer box unit (1) on a at surface. Attach each
leg (2) into place by inserting threaded bolt (B) through the
pre-drilled hole of each metal corner bracket as shown.
2.3 Insert in order the at washer (C), lock washer (D), and hex
nut (E) onto threaded bolt (B) on leg (2) as shown.
2.4 Tighten hex nut (E) using spanner (F) as shown until it is
securely fastened.
B x 4
C x 8
C x 8
D x 8
F x 1

Step 3 With help of assistant, stand the unit upright. Enjoy your new
drawers!