BROSA Smeaton Outdoor Dining Bench User manual

ASSEMBLY GUIDE
Smeaton Outdoor Dining Bench
v1.0

Components
Before you get started, check you have all of the pieces below. If anything’s
missing, please visit
www.brosa.com.au/pages/product-return-and-parts-request and we’ll sort it
out right away.
Leg x 2
Middle Rail x 1
Supporting Frame x 1
Bench Top x 1
Hardware
What you need
1
2
3
4
A x 14 B x 14 C x 1

Step 1 Attach the legs (1) to the middle rail (2). Fit a washer
(B) to a bolt (A) and then insert the bolt into a hole.
Fix the bolt with the Allen key (C) but do not tighten
it yet. Repeat this for the remaining holes.
A x 4
B x 4
C x 1
1
1
2
A
B
C

Step 2 Align the structure formed in Step 1 with the sup-
porting frame (3) and make sure the bolt holes over-
lap. Fit a washer (B) to a bolt (A) and then insert the
bolt into a hole. Fix the bolt with the Allen key (C)
but do not tighten it yet. Repeat this for the remain-
ing holes.
A x 4
B x 4
C x 1
3
A
B
C

Step 3 Place the bench top (4) on a level surface with the
underside facing upward. Align the structure formed
in Step 2 with the table top and make sure the holes
on the brackets overlap the holes on the table top.
Fit a washer (B) to a bolt (A) and then insert the bolt
into a hole. Fix the bolt with the Allen key (C) but do
not tighten it yet. Repeat this for the remaining
holes.
A x 6
B x 6
C x 1
A
B
C
4

Step 4 Tighten all bolts with the Allen key (C).
C x 1
C
C

Step 5 Place the bench upright on a level surface. Enjoy
your new outdoor dining bench!