BROSA Maris Dining Table User manual

v1.0
ASSEMBLY GUIDE
Maris Dining Table

Components
Upon unpacking your dining table from its delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new dining table.
Table top x 1
B x 2 (Metal Support)A x 4 (Leg)
Hardware
What you need
F x 16
(Spring Washer)
G x 1
(Allen Key)
E x 16
(Flat Washer)
D x 4
(Hex Nut)
C x 16 (Bolt)
Spec: M6 x 20mm

Step 1 Align a metal support (B) to a leg (A) and t them
together . Secure the metal support into place using a
hex nut (D). Tighten the hex nut with the allen key (G).
Repeat for the other pair of legs and metal support.
D x 4
G x 1
Step 2 Align the structure formed in Step 1 to the underside of
the table top. Fit a spring washer (F) to a bolt (C)
followed by a at washer (E) and screw into a hole
using the allen key (G) . Repeat for the remaining bolts.
G
D
A
A
B
B
F x 16
G x 1
E x 16
C x 16
G
C
F
E

Step 3 Gently lift the table and place upright on a level surface.
Enjoy your new dining table!